Thermal desorption spectroscopy (TDS) is used to study the decomposition kinetics of erbium hydride thin films. The TDS results presented in this report show that hydride film processing parameters directly impact thermal stability. Issues to be addressed include desorption kinetics for dihydrides and trihydrides, and the effect of film growth parameters, loading parameters, and substrate selection on desorption kinetics.
In the past decade, a great deal of effort has been focused in research and development of versatile robotic ground vehicles without understanding their performance in a particular operating environment. As the usage of robotic ground vehicles for intelligence applications increases, understanding mobility of the vehicles becomes critical to increase the probability of their successful operations. This paper describes a framework based on conservation of energy to predict the maximum mobility of robotic ground vehicles over general terrain. The basis of the prediction is the difference between traction capability and energy loss at the vehicle-terrain interface. The mission success of a robotic ground vehicle is primarily a function of mobility. Mobility of a vehicle is defined as the overall capability of a vehicle to move from place to place while retaining its ability to perform its primary mission. A mobility analysis tool based on the fundamental principle of conservation of energy is described in this document. The tool is a graphical user interface application. The mobility analysis tool has been developed at Sandia National Laboratories, Albuquerque, NM. The tool is at an initial stage of development. In the future, the tool will be expanded to include all vehicles and terrain types.
In the late 1980's the Department of Energy (DOE) faced a future budget shortfall. By the spring of 1991, the DOE had decided to manage this problem by closing three production plants and moving production capabilities to other existing DOE sites. As part of these closings, the mission assignment for fabrication of War Reserve (WR) neutron generators (NGs) was transferred from the Pinellas Plant (PP) in Florida to Sandia National Laboratories, New Mexico (SNL/NM). The DOE directive called for the last WR NG to be fabricated at the PP before the end of September 1994 and the first WR NG to be in bonded stores at SNL/NM by October 1999. Sandia National Laboratories successfully managed three significant changes to project scope and schedule and completed their portion of the Reconfiguration Project on time and within budget. The PP was closed in October 1995. War Reserve NGs produced at SNL/NM were in bonded stores by October 1999. The costs of the move were recovered in just less than five years of NG production at SNL/NM, and the annual savings today (in 1995 dollars) is $47 million.
The dynamic compaction of sand was investigated experimentally and computationally to stresses of 1.8 GPa. Experiments have been performed in the powder's partial compaction regime at impact velocities of approximately 0.25, 0.5, and 0.75 km/s. The experiments utilized multiple velocity interferometry probes on the rear surface of a stepped target for an accurate measurement of shock velocity, and an impedance matching technique was used to deduce the shock Hugoniot state. Wave profiles were further examined for estimates of reshock states. Experimental results were used to fit parameters to the P-Lambda model for porous materials. For simple 1-D simulations, the P-Lambda model seems to capture some of the physics behind the compaction process very well, typically predicting the Hugoniot state to within 3%.
This paper presents continuum simulations of viscous polymer flow during nanoimprint lithography (NIL) for embossing tools having irregular spacings and sizes. Simulations varied non-uniform embossing tool geometry to distinguish geometric quantities governing cavity filling order, polymer peak deformation, and global mold filling times. A characteristic NIL velocity predicts cavity filling order. In general, small cavities fill more quickly than large cavities, while cavity spacing modulates polymer deformation mode. Individual cavity size, not total filling volume, dominates replication time, with large differences in individual cavity size resulting in non-uniform, squeeze flow filling. High density features can be modeled as a solid indenter in squeeze flow to accurately predict polymer flow and allow for optimization of wafer-scale replication. The present simulations make it possible to design imprint templates capable of distributing pressure evenly across the mold surface and facilitating symmetric polymer flow over large areas to prevent mold deformation and non-uniform residual layer thickness.
Sandia networks consist of nearly nine hundred routers and switches and nearly one million lines of command code, and each line ideally contributes to the capabilities of the network to convey information from one location to another. Sandia's Cyber Infrastructure Development and Deployment organizations recognize that it is therefore essential to standardize network configurations and enforce conformance to industry best business practices and documented internal configuration standards to provide a network that is agile, adaptable, and highly available. This is especially important in times of constrained budgets as members of the workforce are called upon to improve efficiency, effectiveness, and customer focus. Best business practices recommend using the standardized configurations in the enforcement process so that when root cause analysis results in recommended configuration changes, subsequent configuration auditing will improve compliance to the standard. Ultimately, this minimizes mean time to repair, maintains the network security posture, improves network availability, and enables efficient transition to new technologies. Network standardization brings improved network agility, which in turn enables enterprise agility, because the network touches all facets of corporate business. Improved network agility improves the business enterprise as a whole.
Abstract not provided.
IEEE Transactions on Dielectrics and Electrical Insulation
A time-dependent, two-dimensional model is used to study internal heating effects and possible device failure in ZnO varistors in response to a high-voltage pulse. The physics and qualitative trends discussed here should hold for materials with internal microstructured grain boundaries. Our analysis is based on an electro-thermal, random Voronoi network. It allows for the dynamic predictions of internal failure and to track the progression of hot-spots and thermal stresses. Results here show that application of high voltage pulses can lead to the attainment of Bi2O3 melting temperatures in the grain boundaries and an accelerated progression towards failure. Comparisons between uniform and normally distributed barrier breakdown voltage showed relatively small difference. Physically, this is shown to be associated with the applied bias regime and grain size. It is argued that reduction in grain size would help lower the maximum internal stress. This is thus a desirable feature, and would also work to enhance the hold-off voltage for a given sample size. © 2007 IEEE.
This LDRD Final report describes work that Stephen W. Thomas performed in 2006. The initial problem was to develop a modeling, simulation, and optimization strategy for the design of a high speed microsystem switch. The challenge was to model the right phenomena at the right level of fidelity, and capture the right design parameters. This effort focused on the design context, in contrast to other Sandia efforts focus on high-fidelity assessment. This report contains the initial proposal and the annual progress report. This report also describes exploratory work on micromaching using femtosecond lasers. Steve's time developing a proposal and collaboration on this topic was partly funded by this LDRD.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Abstract not provided.
Safe and efficient hydrogen storage is a significant challenge inhibiting the use of hydrogen as a primary energy carrier. Although energy storage performance properties are critical to the success of solid-state hydrogen storage systems, operator and user safety is of highest importance when designing and implementing consumer products. As researchers are now integrating high energy density solid materials into hydrogen storage systems, quantification of the hazards associated with the operation and handling of these materials becomes imperative. The experimental effort presented in this paper focuses on identifying the hazards associated with producing, storing, and handling sodium alanates, and thus allowing for the development and implementation of hazard mitigation procedures. The chemical changes of sodium alanates associated with exposure to oxygen and water vapor have been characterized by thermal decomposition analysis using simultaneous thermogravimetric modulated beam mass spectrometry (STMBMS) and X-ray diffraction methods. Partial oxidation of sodium alanates, an alkali metal complex hydride, results in destabilization of the remaining hydrogen-containing material. At temperatures below 70 C, reaction of sodium alanate with water generates potentially combustible mixtures of H{sub 2} and O{sub 2}. In addition to identifying the reaction hazards associated with the oxidation of alkali-metal containing complex hydrides, potential treatment methods are identified that chemically stabilize the oxidized material and reduce the hazard associated with handling the contaminated metal hydrides.
Abstract not provided.
Abstract not provided.
Abstract not provided.