Publications

The objectives of this project are as follows: 1. Reduce uncertainty in PV performance models by developing and validating new and improved models and submodes. 2. Create and manage an open source repository of modeling functions and data. 3. Build and grow the PV Performance Modeling Collaborative; and, 4. Represent the US in the IEA PVPS Task 13 Working group.

Accurate modeling of photovoltaic (PV) performance requires the precise calculation of module temperature. Currently, most temperature models rely on steady-state assumptions that do not account for the transient climatic conditions and thermal mass of the module. On the other hand, complex physics-based transient models are computationally expensive and difficult to parameterize. In order to address this, a new approach to transient thermal modeling was developed, in which the steady-state predictions from previous timesteps are weighted and averaged to accurately predict the module temperature at finer time scales. This model is informed by 3-D finite-element analyses, which are used to calculate the effect of wind speed and module unit mass on module temperature. The model, in application, serves as an added filter over existing steady-state models that smooths out erroneous values that are a result of intermittency in solar resource. Validation of this moving-Average model has shown that it can improve the overall PV energy performance model accuracy by as much as 0.58% over steady-state models based on mean absolute error improvements and can significantly reduce the variability between the model predictions and measured temperature times series data.

Although common practice for estimating photovoltaic (PV) degradation rate (RD) assumes a linear behavior, field data have shown that degradation rates are frequently nonlinear. This article presents a new methodology to detect and calculate nonlinear RD based on PV performance time-series from nine different systems over an eight-year period. Prior to performing the analysis and in order to adjust model parameters to reflect actual PV operation, synthetic datasets were utilized for calibration purposes. A change-point analysis is then applied to detect changes in the slopes of PV trends, which are extracted from constructed performance ratio (PR) time-series. Once the number and location of change points is found, the ordinary least squares method is applied to the different segments to compute the corresponding rates. The obtained results verified that the extracted trends from the PR time-series may not always be linear and therefore, 'nonconventional' models need to be applied. All thin-film technologies demonstrated nonlinear behavior whereas nonlinearity detected in the crystalline silicon systems is thought to be due to a maintenance event. A comparative analysis between the new methodology and other conventional methods demonstrated levelized cost of energy differences of up to 6.14%, highlighting the importance of considering nonlinear degradation behavior.

Optimum and reliable photovoltaic (PV) plant performance requires accurate diagnostics of system losses and failures. Data-driven approaches can classify such losses however, the appropriate PV data features required for accurate classification remains unclear. To avoid misclassification, this study reviews the potential issues associated with inabilities to separate fault conditions that overlap using certain data features. Feature selection techniques that define each feature's importance and identify the set of features necessary for producing the most accurate results are also explored. The experiment quantified the amount of overlap using both maximum power point (MPP) and current and voltage (I-V) curve data sets. The I -V data provided an overall increase in classification accuracy of 8% points above the case where only MPP was available.

Optimum and reliable photovoltaic (PV) plant performance requires accurate diagnostics of system losses and failures. Data-driven approaches can classify such losses however, the appropriate PV data features required for accurate classification remains unclear. To avoid misclassification, this study reviews the potential issues associated with inabilities to separate fault conditions that overlap using certain data features. Feature selection techniques that define each feature's importance and identify the set of features necessary for producing the most accurate results are also explored. The experiment quantified the amount of overlap using both maximum power point (MPP) and current and voltage (I-V) curve data sets. The I -V data provided an overall increase in classification accuracy of 8% points above the case where only MPP was available.

It is a common approach to assume a constant performance drop during the photovoltaic (PV) lifetime. However, operational data demonstrated that PV degradation rate (R_{D}) may exhibit nonlinear behavior, which neglecting it may increase financial risks. This study presents and compares three approaches, based on open-source libraries, which are able to detect and calculate nonlinear R_{D}. Two of these approaches include trend extraction and change-point detection methods, which are frequently used statistical tools. Initially, the processed monthly PV performance ratio (PR) time-series are decomposed in order to extract the trend and change-point analysis techniques are applied to detect changes in the slopes. Once the number of change-points is optimized by each model, the ordinary least squares (OLS) method is applied on the different segments to compute the corresponding rates. The third methodology is a regression analysis method based on simultaneous segmentation and slope extraction. Since the 'real' R_{D} value is an unknown parameter, this investigation was based on synthetic datasets with emulated two-step degradation rates. As such, the performance of the three approaches was compared exhibiting mean absolute errors ranging from 0 to 0.46%/year whereas the change-point position detection differed from 0 to 10 months.

Abstract not provided.

Dust accumulation significantly affects the performance of photovoltaic modules and its impact can be mitigated by various cleaning methods. Optimizing the cleaning frequency is essential to minimize the soiling losses and, at the same time, the costs. However, the effectiveness of cleaning lowers with time because of the reduced energy yield due to degradation. Additionally, economic factors such as the escalation in electricity price and inflation can compound or counterbalance the effect of degradation on the soiling mitigation profits. The present study analyzes the impact of degradation, escalation in electricity price and inflation on the revenues and costs of cleanings and proposes a methodology to maximize the profits of soiling mitigation of any system. The energy performance and soiling losses of a 1 MW system installed in southern Spain were analyzed and integrated with theoretical linear and nonlinear degradation rate patterns. The Levelized Cost of Energy and Net Present Value were used as criteria to identify the optimum cleaning strategies. The results showed that the two metrics convey distinct cleaning recommendations, as they are influenced by different factors. For the given site, despite the degradation effects, the optimum cleaning frequency is found to increase with time of operation.

The IEC 61853 PV module energy rating standard requires measuring module power (and hence efficiency) over a matrix of irradiance and temperature conditions. These matrix points represent nearly the full range of operating conditions encountered in the field in all but the most extreme locations, and create an opportunity to develop alternative approaches to existing modelssuch as the single-diode models and the Sandia Array Performance Modelfor calculating system performance. This report begins by discussing the bilinear interpolation and extrapolation method from IEC 61853-3, and then describes four existing model-based methods that could be used with matrix measurements. Then a new model is developed and all options are compared according to seven objective criteria using the matrix measurements of four PV modules of different technologies. The results show that the new model is an excellent candidate for launching power matrix-based PV system simulations.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.