Publications

A gridless numerical technique called smooth particle hydrodynamics (SPH) has been coupled the transient dynamics finite element code, PRONTO. In this paper, a new weighted residual derivation for the SPH method will be presented, and the methods used to embed SPH within PRONTO will be outlined. Example SPH-PRONTO calculations will also be presented. Smooth particle hydrodynamics is a gridless Lagrangian technique. Requiring no mesh, SPH has the potential to model material fracture, large shear flows, and penetration. SPH computes the strain rate and the stress divergence based on the nearest neighbors of a particle, which are determined using an efficient particle sorting technique. Embedding the SPH method within PRONTO allows part of the problem to be modeled with quadrilateral finite elements while other parts are modeled with the gridless SPH method. SPH elements are coupled to the quadrilateral elements through a contact like algorithm.

The response of thickness shear mode (TSM) resonators in liquids is examined. Smooth-surface devices, which viscously entrain a layer of contacting liquid, respond to the product of liquid density and viscosity. Textured-surface devices, which also trap liquid in surface features, exhibit an additional response that depends on liquid density alone. Combining smooth and textured resonators in a monolithic sensor allows simultaneous measurement of liquid density and viscosity.

The Yucca Mountain Site Characterization Project is studying Yucca Mountain in southwestern Nevada as a potential site for a high-level nuclear waste repository. Site characterization includes surface-based and underground testing. Analyses have been performed to support the design of site characterization activities so to have minimal impact on the ability of the site to isolate waste, and on tests performed as part of the characterization process. Two examples of site characterization activities are the construction of an Exploratory Studies Facility, which may include underground shafts, drifts, and ramps, and surface-based testing activities, which may require borehole drilling, excavation of test pits, and road watering for dust control. The information in this report pertains to two-dimensional numerical calculations modeling the movement of surficially applied water and the potential effects of that water on repository performance and underground experiments. This document contains information that has been used in preparing recommendations for two Yucca Mountain Site Characterization Project documents: Appendix I of the Exploratory Studies Facility Design Requirements document, and the Surface-Based Testing Field Requirements Document.

The Yucca Mountain Site Characterization Project is studying Yucca Mountain in southwestern Nevada as a potential site for a high-level radioactive waste repository. Analyses reported herein were performed to support the design of site characterization activities so that these activities will have a minimal impact on the ability of the site to isolate waste and a minimal impact on underground tests performed as part of the characterization process. These analyses examine the effect of water to be used in the underground construction and testing activities for the Exploratory Studies Facility on in situ conditions. Underground activities and events where water will be used include construction, expected but unplanned spills, and fire protection. The models used predict that, if the current requirements in the Exploratory Studies Facility Design Requirements are observed, water that is imbibed into the tunnel wall rock in the Topopah Springs welded tuff can be removed over the preclosure time period by routine or corrective ventilation, and also that water imbibed into the Paintbrush Tuff nonwelded tuff will not reach the potential waste storage area.

A dynamic simulator of the TOPAZ II reactor system has been developed for the Nuclear Electric Propulsion Space Test Program. The simulator combines first-principle modeling and empirical correlations in its algorithm to attain the modeling accuracy and computational through-put that are required for real-time execution. The overall execution time of the simulator for each time step is 15 ms when no data is written to the disk, and 18 ms when nine double precision data points are written to the disk once in every time step. The simulation program has been tested and it is able to handle a step decrease of $8 worth of reactivity. It also provides simulations of fuel, emitter, collector, stainless steel, and ZrH moderator failures. Presented in this paper are the models used in the calculations, a sample simulation session, and a discussion of the performance and limitations of the simulator. The simulator has been found to provide realistic real-time dynamic response of the TOPAZ II reactor system under both normal and casualty conditions.

Samples of chemically-vapor-deposited micrometer and sub-micrometer-thick films of polysilicon were analyzed by transmission electron microscopy (TEM) in cross-section and by Raman spectroscopy with illumination at their surface. TEM and Raman spectroscopy both find varying amounts of polycrystalline and amorphous silicon in the wafers. Raman spectra obtained using blue, green and red excitation wavelengths to vary the Raman sampling depth are compared with TEM cross-sections of these films. Films showing crystalline columnar structures in their TEM micrographs have Raman spectra with a band near 497 cm{sup {minus}1} in addition to the dominant polycrystalline silicon band (521 cm{sup {minus}1}). The TEM micrographs of these films have numerous faulted regions and fringes indicative of nanometer-scale silicon structures, which are believed to correspond to the 497cm{sup {minus}1} Raman band.

This paper examines some of the metrics that are commonly used to design correlation filter's for optical pattern recognition, including: the Fisher ratio, the signal-to-noise ratio, the equal correlation peak (ECP) contraint, and normalized correlation. Attention is given to the underlying assumptions that are required to move from Bayesian decision theory to a particular metric or design principle. Since a Bayes classifier is statistically optimum, this provides a means for assessing the merit of a particular approach. Although we only examine a few metrics in this paper, the approach is general and should be useful for assessing the merit and applicability of any of the numerous filter designs that have been proposed in the optical pattern recognition community.

Optical communication is likely to significantly speed up parallel computation because the vast bandwidth of the optical medium can be divided to produce communication networks of very high degree. However, the problem of contention in high-degree networks makes the routing problem in these networks theoretically (and practically) difficult. In this paper we examine Valiant`s h-relation routing problem, which is a fundamental problem in the theory of parallel computing. The h-relation routing problem arises both in the direct implementation of specific parallel algorithms on distributed-memory machines and in the general simulation of shared memory models such as the PRAM on distributed-memory machines. In an h-relation routing problem each processor has up to h messages that it wishes to send to other processors and each processor is the destination of at most h messages. We present a lower bound for routing an h-relation (for any h > 1) on a complete optical network of size -n. Our lower bound applies to any randomized distributed algorithm for this task. Specifically, we show that the expected number of communication steps required to route an arbitrary h-relation is {Omega}(h + {radical}log log n). This is the first known lower bound for this problem which does not restrict the class of algorithms under consideration.

We present a global motion planner for tracing curves in three dimensions with robot manipulator tool frames. This planner generates an efficient motion satisfying three types of constraints; constraints on the tool tip for curve tracing, robot kinematic constraints and robot-link collision constraints. Motions are planned using a global search algorithm and a local planner based on a potential-field approach. This planner can be used with potential-field approach. This planner can be used with any robots including redundant manipulators, and can any robots including redundant manipulators, and can control the trade-offs between its algorithmic completeness and computation time. It can be applied in many robotic tasks such as seam welding, caulking, edge deburrring and chamfering, and is expected to reduce motion programming times from days to minutes.

Robotic systems are often very complex and difficult to operate, especially as multiple robots are integrated to accomplish difficult tasks. In addition, training the operators of these complex robotic systems is time-consuming and costly. In this paper, a virtual reality based robotic control system is presented. The virtual reality system provides a means by which operators can operate, and be trained to operate, complex robotic systems in an intuitive, cost-effective way. Operator interaction with the robotic system is at a high, task-oriented, level. Continuous state monitoring prevents illegal robot actions and provides interactive feedback to the operator and real-time training for novice users.

Probabilistic risk assessment (PRA) is a process for evaluating hazardous operations by considering what can go wrong, the likelihood of these undesired events, and the resultant consequences. Techniques used in PRA originated in the 1960s. Although there were early exploratory applications to nuclear weapons and other technologies, the first major application of these techniques was in the Reactor Safety Study, WASH-1400, {sup 1} in which the risks of nuclear power accidents were thoroughly investigated for the first time. Recently, these techniques have begun to be adapted to nuclear weapon system applications. This report discusses this application to nuclear weapon systems.

In this paper, we present a new hybrid motion planner than is capable of exploiting previous planning episodes when confronted with new planning problems. Our approach is applicable when several (similar) problems are successively posed for the same static environment, or when the environment changes incrementally between planning episodes. At the heart of our system lie two low-level motion planners: a fast, but incomplete planner (which we call LOCAL), and a computationally costly (possibly resolution) complete planner (which we call GLOBAL). When a new planning problem is presented to our planner, a meta-level planner (which we call MANAGER) decomposes the problem into segments that are amenable to solution by LOCAL. This decomposition is made by exploiting a task graph, in which successful planning episodes have been recorded. In cases where the decomposition fails, GLOBAL is invoked. The key to our planner`s success is a novel representation of solution trajectories, in which segments of collision-free paths are associated with the boundary of nearby obstacles.

Sandia has been studying automatic assembly planning of electromechanical devices for some years, based on an implemented system called Archimedes. Work done to date has focussed on automatic generation of high-level plans, and translation of these plans into robotic control code and workcell layout. More recently, the importance of an assembly planning capability as a design aid has been emphasized, as it could potentially provide early feedback to a designer on the manufacturability of the design. This paper describes the work done on assembly planning to date, plans for extending it, and its applications to agile manufacturing. In particular, we describe an agile manufacturing demonstration project underway at Sandia, and the role the Archimedes assembly planning system will play in it.

Today, 109 nuclear power plants provide over 20 percent of the electrical energy generated in the US The operating license of the first of these plants will expire in the year 2000; one-third of the operating licenses will expire by 2010 and the remaining plant licenses are scheduled to expire by 2033. The National Energy Strategy assumes that 70 percent of these plants will continue to operate beyond their current license expiration to assist in ensuring an adequate, diverse, and environmentally acceptable energy supply for economic growth. In order to preserve this energy resource in the US three major tasks must be successfully completed: establishment of regulations, technical standards, and procedures for the preparation and review of a license renewal application; development, verification, and validation of technical criteria and bases for monitoring, refurbishing, and/or replacing plant equipment; and demonstration of the regulatory process. Since 1985, the US Department of Energy (DOE) has been working with the nuclear industry and the US Nuclear Regulatory Commission (NRC) to establish and demonstrate the option to extend the life of nuclear power plants through the renewal of operating licenses. This paper focuses primarily on DOE`s Plant Lifetime Improvement (PLIM) Program efforts to develop the technical criteria and bases for effective aging management and lifetime improvement for continued operation of nuclear power plants. This paper describes current projects to resolve generic technical issues in the principal areas of reactor pressure vessel (RPV) integrity, fatigue, and environmental qualification (EQ).

We have evaluated a wide variety of microcellular carbon foams prepared by the controlled pyrolysis and carbonization of several polymers including: polyacrylonitrile (PAN), polymethacrylonitrile (PMAN), resorcinol/formaldehyde (RF), divinylbenzene/methacrylonitrile (DVB), phenolics (furfuryl/alcohol), and cellulose polymers such as Rayon. The porosity may be established by several processes including: Gelation (1-5), phase separation (1-3,5-8), emulsion (1,9,10), aerogel/xerogel formation (1,11,12,13), replication (14) and activation. In this report we present the complex impedance analysis and double layer charging characteristics of electrodes prepared from one of these materials for double layer capacitor applications, namely activated cellulose derived microcellular carbon foam.

This paper evaluates the correlation between values of minimum principal in situ stress derived from two different models which use data obtained from triaxial core tests and coefficient for earth at rest correlations. Both models use triaxial laboratory tests with different confining pressures. The first method uses a vcrified fit to the Mohr failure envelope as a function of average rock grain size, which was obtained from detailed microscopic analyses. The second method uses the Mohr-Coulomb failure criterion. Both approaches give an angle in internal friction which is used to calculate the coefficient for earth at rest which gives the minimum principal in situ stress. The minimum principal in situ stress is then compared to actual field mini-frac test data which accurately determine the minimum principal in situ stress and are used to verify the accuracy of the correlations. The cores and the mini-frac stress test were obtained from two wells, the Gas Research Institute`s (GRIs) Staged Field Experiment (SFE) no. 1 well through the Travis Peak Formation in the East Texas Basin, and the Department of Energy`s (DOE`s) Multiwell Experiment (MWX) wells located west-southwest of the town of Rifle, Colorado, near the Rulison gas field. Results from this study indicates that the calculated minimum principal in situ stress values obtained by utilizing the rock failure envelope as a function of average rock grain size correlation are in better agreement with the measured stress values (from mini-frac tests) than those obtained utilizing Mohr-Coulomb failure criterion.

Currently, the production of in situ reinforcement in polymeric systems by sol-gel methods is undergoing rapid development. However, understanding of synthesis/structure/property relationships is still lacking. In order to produce sol-gel derived composite materials with sufficient mechanical properties for commercial applications, this deficit of information must be addressed. We have completed a detailed investigation of in situ silica growth in polydimethylsiloxane (PDMS)/tetraethylorthosilicate (TEOS) systems. Factors which affect the domain growth, such as catalyst activity and silica loading, have been examined by solid state {sup 29}Si NMR, SEM, mechanical testing and small angle neutron scattering.

Infrared emission spectra of 21 borophosphosilicate glass (BPSG) thin films on silicon wafers were collected with the samples held at constant temperature between 125--400{degree}C using a heating stage designed for precise temperature control ({plus_minus}{degree}C). Partial test squares calibrations applied to the BPSG infrared emittance spectra allowed four BPSG thin-film properties to be simultaneously quantified with precisions of 0.1 wt. % for boron and phosphorus, 35 {Angstrom} for film thickness, and 1.2{degree}C for temperature.

Experiments were performed to examine sensitivity of thin-film property determinations to several experimental variables when applying multivariate calibration methods to infrared reflection spectroscopic data. Results indicate that low angles of incidence are best for robust quantitative determination of boron, phosphorus, and film thickness in borophosphosilicate glass (BPSG) dielectric films. However, the polarization state of the incidence beam does not affect the quantitative prediction ability.

Due to the growth in the use of analog fiber optic data transmission systems at the Nevada Test Site and other locations, Sandia National Laboratories (SNL) has recognized the need to be able to multiplex several data channels per fiber. Wavelength-division, frequency-division, and time-division multiplex techniques have been investigated. A time-division system using optically-multiplexed laser transmitters driving a common receiver was fielded on the HUNTERS TROPHY event at the NTS. Stability, noise, and dynamic range compared favorably with that seen on nonmultiplexed links. Amplitude, width, and rise time of data transmitted via the multiplexed links was consistent with that recorded from non-multiplexed links.

Synthetic aperture radar (SAR) was evaluated as a potential technological improvement over the Coast Guard`s existing side-looking airborne radar (SLAR) for oil-spill surveillance applications. The US Coast Guard Research and Development Center (R&D Center), Environmental Branch, sponsored a joint experiment including the US Coast Guard, Sandia National Laboratories, and the Naval Oceanographic and Atmospheric Administration (NOAA), Hazardous Materials Division. Radar imaging missions were flown on six days over the coastal waters off Santa Barbara, CA, where there are constant natural seeps of oil. Both the Coast Guard SLAR and the Sandia National Laboratories SAR were employed to acquire simultaneous images of oil slicks and other natural sea surface features that impact oil-spill interpretation. Surface truth and other environmental data were also recorded during the experiment. The experiment data were processed at Sandia National Laboratories and delivered to the R&D Center on a computer workstation for analysis by experiment participants. Issues such as optimal spatial resolution, single-look vs. multi-look SAR imaging, and the utility of SAR for oil-spill analysis were addressed. Finally, conceptual design requirements for a possible future Coast Guard SAR were outlined and evaluated.

Sandia National Laboratories was tasked by the US Nuclear Regulatory Commission to perform a Probabilistic Risk Assessment (PRA) of a boiling water reactor (BWR) during low power and shutdown (LP&S) conditions. The plant chosen for the study was Grand Gulf Nuclear Station (GGNS), a BWR 6. In performing the analysis, it was found that in comparison with full-power PRAs, the low decay heat levels present during LP&S conditions result in a relatively large number of ways by which cooling can be provided to the core. In addition, because of the less stringent requirements imposed on system configurations possible is large and the availability of plant systems is more difficult to specify. These aspects of the LP&S environment led to the development and use of ``generic`` event trees in performing the analysis. The use of ``generic`` event trees, in turn, had a significant impact on the nature of the human reliability analysis (HRA) that was performed. This paper describes the development of the event trees for the LP&S PRA and important aspects of the resulting HRA.

The computer program, DMC (Distinct Motion Code), which was developed for simulating the rock motion associated with blasting, has been used to study the influence of row delay timing on rock motion. The numerical simulations correspond with field observations in that very short delays (< 50ms) and very long delays (> 300ms) produce a lower percent-cast than a medium delay (100 to 200 ms). The DMC predicted relationship between row delay timing and percent-cast is more complex than expected with a dip in the curve where the optimum timing might be expected. More study is required to gain a full understanding of this phenomenon.

When presented with a new supercomputer most users will first ask {open_quotes}How much faster will my applications run?{close_quotes} and then add a fearful {open_quotes}How much effort will it take me to convert to the new machine?{close_quotes} This paper describes some lessons learned at Sandia while asking these questions about the new 1800+ node Intel Paragon. The authors conclude that the operating system is crucial to both achieving high performance and allowing easy conversion from previous parallel implementations to a new machine. Using the Sandia/UNM Operating System (SUNMOS) they were able to port a LU factorization of dense matrices from the nCUBE2 to the Paragon and achieve 92% scaled speed-up on 1024 nodes. Thus on a 44,000 by 44,000 matrix which had required over 10 hours on the previous machine, they completed in less than 1/2 hour at a rate of over 40 GFLOPS. Two keys to achieving such high performance were the small size of SUNMOS (less than 256 kbytes) and the ability to send large messages with very low overhead.

A model of permeability changes in rock salt is developed and implemented in a time-dependent finite element code. Model parameters are developed from laboratory tests. The model is used to predict permeability changes adjacent to excavations in rock salt.

The purpose of this paper is to present a preliminary estimate of the nuclear-related public health risk presented by launching and operating the Russian TOPAZ II space reactor as part of the Nuclear Electric Propulsion Space Test Program (NEPSTP). This risk is then compared to the risks from the operation of commercial nuclear power reactors and previously planned and/or launched space nuclear power missions. For the current mission profile, the initial estimate of the risk posed by launching and operating TOPAZ II is significantly less (at least two orders of magnitude) than that estimated for prior space nuclear missions. Even allowing for the large uncertainties in this estimate, it does not appear that the NEPSTP mission will present a significant health risk to the public.

The WETCOR-1 test of simultaneous interactions of a high-temperature melt with water and a limestone/common-sand concrete is described. The test used a 34.1-kg melt of 76.8 w/o Al{sub 2}O{sub 3}, 16.9 w/o CaO, and 4.0 w/o SiO{sub 2} heated by induction using tungsten susceptors. Once quasi-steady attack on concrete by the melt was established, an attempt was made to quench the melt at 1850 K with 295 K water flowing at 57 liters per minute. Net power into the melt at the time of water addition was 0.61 {plus_minus} 0.19 W/cm{sup 3}. The test configuration used in the WETCOR-1 test was designed to delay melt freezing to the walls of the test fixture. This was done to test hypotheses concerning the inherent stability of crust formation when high-temperature melts are exposed to water. No instability in crust formation was observed. The flux of heat through the crust to the water pool maintained over the melt in the test was found to be 0.52 {plus_minus} 0.13 MW/m{sup 2}. Solidified crusts were found to attenuate aerosol emissions during the melt concrete interactions by factors of 1.3 to 3.5. The combination of a solidified crust and a 30-cm deep subcooled water pool was found to attenuate aerosol emissions by factors of 3 to 15.

A structural analysis methodology has been developed for the NASA 2.5-inch frangible nut used on the Space Shuttle. Two of these nuts are used to secure the External Tank to the aft end of the Orbiter. Both nuts must completely fracture before the Orbiter can safely separate from the External Tank. Ideally, only one of the two explosive boosters contained in each nut must detonate to completely break a nut. However, after an uncontrolled change in the Inconel 718 material processing, recent tests indicate that in certain circumstances both boosters may be required. This report details the material characterization and subsequent structural analyses of nuts manufactured from two lots of Inconel 718. The nuts from the HSX lot were observed to consistently separate with only one booster, while the nuts from the HBT lot never completely fracture with a single booster. The material characterization requires only tensile test data and the determination of a tearing parameter based on a computer simulation of a tensile test. Subsequent structural analyses using the PRONTO2D finite element code correctly predict the differing response of nuts fabricated from these two lots. This agreement is important because it demonstrates that this technique can be used to screen lots of Inconel 718 before manufacturing frangible nuts from them. To put this new capability to practice, Sandia personnel have transferred this technology to the Pyrotechnics Group at NASA-JSC.

The National Aeronautics and Space Administration (NASA) is planning to launch a network of scientific probes to Mars beginning in late 1996. The precursor to this network will be PATHFINDER. Decelerating PATHFINDER from the high speed of its approach to Mars will require the use of several deceleration techniques working in series. The Jet Propulsion Laboratory (JPL) has proposed that gas bags be used to cushion the payload`s ground impact on Mars. This report presents the computer code, BAG, which has been developed to calculate the pneumatic performance of gas bag impact attenuators and the one-dimensional rigid-body dynamic performance of a payload during ground impact.

Graph partitioning is a fundamental problem in many scientific settings. This document describes the capabilities and operation of Chaco, a software package designed to partition graphs. Chaco allows for recursive application of any of several different methods for finding small edge separators in weighted graphs. These methods include inertial, spectral, Kernighan-Lin and multilevel methods in addition to several simpler strategies. Each of these methods can be used to partition the graph into two, four or eight pieces at each level of recursion. In addition, the Kernighan-Lin method can be used to improve partitions generated by any of the other methods. Brief descriptions of these methods are provided, along with references to relevant literature. The user interface, input/output formats and appropriate settings for a variety of code parameters are discussed in detail, and some suggestions on algorithm selection are offered.

This document, the Stockpile Dismantlement Database (SDDB) training materials is designed to familiarize the user with the SDDB windowing system and the data entry steps for Component Characterization for Disposition. The foundation of information required for every part is depicted by using numbered graphic and text steps. The individual entering data is lead step by step through generic and specific examples. These training materials are intended to be supplements to individual on-the-job training.

This report is a followup to the work presented in NUREG/CR-5423 addressing early failure of a BWR Mark I containment by melt attack of the liner, and it constitutes a part of the implementation of the Risk-Oriented Accident Analysis Methodology (ROAAM) employed therein. In particular, it expands the quantification to include four independent evaluations carried out at Rensselaer Polytechnic Institute, Argonne National Laboratories, Sandia National Laboratories and ANATECH, Inc. on the various portions of the phenomenology involved. These independent evaluations are included here as Parts II through V. The results, and their integration in Part I, demonstrate the substantial synergism and convergence necessary to recognize that the issue has been resolved.

A discrete element computer program, DMC (Distinct Motion Code) was developed to simulate blast-induced rock motion. To simplify the complex task of entering material and explosive design parameters as well as bench configuration, a full-featured graphical interface has been developed. DMC is currently executed on both Sun SPARCstation 2 and Sun SPARCstation 10 platforms and routinely used to model bench and crater blasting problems. This paper will document the design and development of the full-featured interface to DMC. The development of the interface will be tracked through the various stages, highlighting the adjustments made to allow the necessary parameters to be entered in terms and units that field blasters understand. The paper also discusses a novel way of entering non-integer numbers and the techniques necessary to display blasting parameters in an understandable visual manner. A video presentation will demonstrate the graphics interface and explains its use.

This report describes the source term estimation codes, XSORs. The codes are written for three pressurized water reactors (Surry, Sequoyah, and Zion) and two boiling water reactors (Peach Bottom and Grand Gulf). The ensemble of codes has been named ``XSOR``. The purpose of XSOR codes is to estimate the source terms which would be released to the atmosphere in severe accidents. A source term includes the release fractions of several radionuclide groups, the timing and duration of releases, the rates of energy release, and the elevation of releases. The codes have been developed by Sandia National Laboratories for the US Nuclear Regulatory Commission (NRC) in support of the NUREG-1150 program. The XSOR codes are fast running parametric codes and are used as surrogates for detailed mechanistic codes. The XSOR codes also provide the capability to explore the phenomena and their uncertainty which are not currently modeled by the mechanistic codes. The uncertainty distributions of input parameters may be used by an. XSOR code to estimate the uncertainty of source terms.

Silica glass fibers have been produced and tested under ultra high vacuum (UHV) conditions to investigate the inert strength of pristine fibers in absence of reactive agents. Analysis of the coefficient of variation in diameter ({upsilon}{sub d}) vs the coefficient of variation of breaking strength ({upsilon}{sub {sigma}}) does not adequately explain the variation of breaking stress. Distribution of fiber tensile strength data suggests that the inert strength of such fibers is not single valued and that the intrinsic strength is controlled by defects in the glass. Furthermore, comparison of room temperature UHV data with LN{sub 2} data indicates that these intrinsic strengths are not temperature dependent.

A chemical vapor deposition technique is used to produce amorphous boron nitride and carbon thin films on high strength silica glass fibers. In this method, the fiber is drawn under ultra high vacuum conditions and low pressure process gases, in the presence of a hot tungsten filament, are used to grow films at low substrate temperatures. Films deposited with this technique do not degrade the intrinsic pristine strength of the silica fibers under dry conditions and, when stressed in chemically aggressive environments, act as effective barrier coatings.

A non-contact system for alignment of objects on mass properties measuring instruments is described. Test parts can be aligned to within the capabilities of the user and the fixture to make the adjustments. The current implementation can align objects to less than .001 inches at two points with final requested adjustments of a few ten-thousands of an inch. The non-contact capability allows the alignment of objects which are too compliant or fragile for traditional contacting measurement methods. Also, this system allows the definition of a reference axis on objects which are not perfectly symmetric. The reference axis is defined at the top of the object by an appropriate marker and defined at the bottom by a best fit circle through the surface at a specified height. A general description of the hardware, procedures, and results are presented for the non-user. Appendices which contain a complete description of the software, usage, and mathematical implementation are provided for the reader who is interested in using or further developing the system.

A comprehensive review of experimental base pressure and base heating data related to supersonic and hypersonic flight vehicles has been completed. Particular attention was paid to free-flight data as well as wind tunnel data for models without rear sting support. Using theoretically based correlation parameters, a series of internally consistent, empirical prediction equations has been developed for planar and axisymmetric geometries (wedges, cones, and cylinders). These equations encompass the speed range from low supersonic to hypersonic flow and laminar and turbulent forebody boundary layers. A wide range of cone and wedge angles and cone bluntness ratios was included in the data base used to develop the correlations. The present investigation also included preliminary studies of the effect of angle of attack and specific-heat ratio of the gas.

Materials used in the optical elements of a 1,061 m GSGG (gadolinium scandium gallium garnet) laser have been tested for transient radiation-induced absorption. The transient radiation-induced absorption in KK1, Schott S7005 and S7010, and M382 glasses have been determined for discrete wavelengths in the range 440--750 nm. Also, the transient radiation-induced absorption in {open_quotes}pure{close_quotes} and MgO doped LiNbO{sub 3} has been measured at 1,061 nm. Mathematical expressions composed of exponentials are fitted to the data.

This report was prepared at the request of the US Department of Energy`s Office of Energy Management for an objective comparison of the merits of battery energy storage with superconducting magnetic energy storage technology for utility applications. Conclusions are drawn regarding the best match of each technology with these utility application requirements. Staff from the Utility Battery Storage Systems Program and the superconductivity Programs at Sandia National contributed to this effort.

This report summarizes the effort to quantify the electromagnetic environments in the nuclear explosive areas at Pantex due to direct lightning. The fundamental measure of the threat to nuclear safety is assumed to be the maximum voltage between any two points in an assembly area, which is then available for producing arcing or for driving current into critical subsystems of a nuclear weapon. This maximum voltage has been computed with simple analytical models and with three-dimensional finite-difference computer codes.

The expert panel identified basic principles to guide current and future marker development efforts: (1) the site must be marked, (2) message(s) must be truthful and informative, (3) multiple components within a marker system, (4) multiple means of communication (e.g., language, pictographs, scientific diagrams), (5) multiple levels of complexity within individual messages on individual marker system elements, (6) use of materials with little recycle value, and (7) international effort to maintain knowledge of the locations and contents of nuclear waste repositories. The efficacy of the markers in deterring inadvertent human intrusion was estimated to decrease with time, with the probability function varying with the mode of intrusion (who is intruding and for what purpose) and the level of technological development of the society. The development of a permanent, passive marker system capable of surviving and remaining interpretable for 10,000 years will require further study prior to implementation.

The EXPO was organized to increase communication between US industry and DOE`s national laboratories. The report contains copies of viewgraphs of all speakers and reports of workshops designed to identify priority needs of industry. A conference synopsis and set of recommendations to DOE are also included.

Research in recent years has demonstrated the efficient use of solar thermal energy for driving endothermic chemical reforming reactions in which hydrocarbons are reacted to form synthesis gas (syngas). Closed-loop reforming/methanation systems can be used for storage and transport of process heat and for short-term storage for peaking power generation. Open-loop systems can be used for direct fuel production; for production of syngas feedstock for further processing to specialty chemicals and plastics and bulk ammonia, hydrogen, and liquid fuels; and directly for industrial processes such as iron ore reduction. In addition, reforming of organic chemical wastes and hazardous materials can be accomplished using the high-efficiency destruction capabilities of steam reforming. To help identify the most promising areas for future development of this technology, we discuss in this paper the economics and market potential of these applications.

The combined dynamic environments of vibration and linear acceleration are common to a large number of spacecraft components and other devices. Testing such devices has normally been a two-step process in which independent vibration and centrifuge tests are performed. There is a concern that the combined effects from these two dynamic environments could cause unexpected operational failures that were not predicted from either analysis or independent testing. This paper describes the design and performance of a testing facility that combines vibration and centrifuge testing in a single operation. The test facility is called the Vibrafuge and utilizes Sandia National Laboratories' (SNL) 29-ft underground centrifuge with an attached electrodynamic shaker. Also addressed are activities underway at SNL on development of a combined vibration and acoustic test facility (ATF).

An Integrated Demonstration Program, hosted by the Fernald Environmental Restoration Management Corporation (FERMCO), has been established for investigating technologies applicable to the characterization and remediation of soils contaminated with uranium. An important part of this effort is the evaluation of field screening tools capable of acquiring high resolution information on the distribution of uranium contamination in surface soils in a cost-and-time efficient manner. Consistent with this need, four field screening technologies have been demonstrated at two hazardous waste sites at the FERMCO. The four technologies tested are wide-area gamma spectroscopy, beta scintillation counting, laser ablation-inductively coupled plasma-atomic emission spectroscopy (LA-ICP-AES), and long-range alpha detection (LRAD). One of the important findings of this demonstration was just how difficult it is to compare data collected by means of multiple independent measurement techniques. Difficulties are attributed to differences in measurement scale, differences in the basic physics upon which the various measurement schemes are predicated, and differences in the general performance of detector instrumentation. It follows that optimal deployment of these techniques requires the development of an approach for accounting for the intrinsic differences noted above. As such, emphasis is given in this paper to the development of a methodology for integrating these techniques for use in site characterization programs as well as the development of a framework for interpreting the collected data. The methodology described here also has general application to other field-based screening technologies and soil sampling programs.

This paper describes the development and use of the Multi-Axis Seam Tracking (MAST) sensor for tracking seams or other features in real-time. Four independent, spatially-distributed electric fields are used to sense changes in the relative position of the sensor and the workpiece. The MAST sensor is very inexpensive compared with commercially available seam tracking sensors. It can be used in systems to perform cost-effective small-lot manufacturing operations in a faster, more consistent manner. The MAST sensor is used in an automated system for dispensing braze paste during a rocket nozzle fabrication process.

Pitting of 1100 Al(Al-1.0(Fe,Cu,Si)) due to Al{sub 3}Fe constituent particles has been studied by examining a variety of intrinsic, extrinsic, and environmental factors that contribute to localized corrosion. Consistent with results from other studies, Al{sub 3}Fe is noble with respect to its microstructural surroundings and pitting is localized to the particle periphery. Polarization curves indicate that cathodic electron transfer reactions are supported on Al{sub 3}Fe at high rates, however, a anodic electron transfer reactions are not. Interparticle spacing appears to play a strong role in determining where pitting will occur, while Al{sub 3}Fe particle area plays a lesser role. Solution pH, applied potential, and exposure time each have measurable effects on the electrochemical behavior of Al{sub 3}Fe and the {alpha}-Al matrix phase which can impact either the galvanic potential of the Al{sub 3}Fe/{alpha}-Al couple, or charge transfer processes on Al{sub 3}Fe particles.

Using surface acoustic wave (SAW) devices, three approaches to the effective use of chemically sensitive interfaces that are not highly chemically selective have been examined: (1) molecular identification from time-resolved permeation transients; (2) using multifrequency SAW devices to determine the frequency dependence of analyte/film interactions; (3) use of an array of SAW devices bearing diverse chemically sensitive interfaces to produce a distinct response pattern for each analyte. In addition to their well-known sensitivity to mass changes (0.0035 monolayer of N{sub 2} can be measured), SAW devices respond to the mechanical and electronic properties of thin films, enhancing response information content but making a thorough understanding of the perturbation critical. Simultaneous measurement of changes in frequency and attenuation, which can provide the information necessary to determine the type of perturbation, are used as part of the above discrimination schemes.

All of American industry is being subjected to increased competitive pressures due to customer needs for shorter cycle times and better quality. The investment casting industry could be in a unique position to satisfy these needs by incorporating several emerging technologies into production processes. The inherent versatility and flexibility of casting make it a truly agile manufacturing process. Because of its compatibility with new rapid prototyping technologies, investment casting could be one of the key vehicles in the new ``art to part`` paradigm. Recently, dramatic advances have been made in the quality of wax and plastic patterns, parts, and tooling by investment casting on time scales unheard of today. Because design and acquisition of tooling contributes heavily to the lead time for any market, these advances will strengthen the position of investment casting manufacturers and customers, and create opportunities in traditional and non-tradition markets. Key to achieving this goal is to use the technology to remove uncertainties from investment casting process. To do this, we must collectively build the infrastructure to enable investment casting companies to make parts right the first time, every time. Integration of mature and on-the-horizon technologies will make this revolution possible and create large growth in markets for investment castings.