A major objective of the Nuclear Regulatory Commission`s (NRC) Individual Plant Examination (IPE) Insights Program is to identify the important determinants of core damage frequency (CDF) for the different reactor and containment types and plant designs as indicated in the IPEs. The human reliability analysis (HRA) is a critical component of the probabilistic risk assessments (PRAS) which were done for the IPES. The determination and selection of human actions for incorporation into the event and fault tree models and the quantification of their failure probabilities can have an important impact on the resulting estimates of CDF and risk. Therefore, two important goals of the NRCs IPE Insights Program are (1) to determine the extent to which human actions and their corresponding failure probabilities influenced the results of the IPEs and (2) to identify which factors played significant roles in determining the differences and similarities in the results of the HRA analyses across the different plants. To obtain the relevant information, the NRC`s IPE database, which contains information on plant design, CDF, and containment performance obtained from the IPES, was used in conjunction with a systematic examination of the HRA analyses and results from the IPES. Regarding the extent to which the results of the HRA analyses were significant contributors to the plants` CDFs, examinations of several different measures indicated that while individual human actions could have important influences on CDF for particular initiators, the HRA results did not appear to be the most significant driver of plant risk (CDF). Another finding was that while there were relatively wide variations in the calculated human error probabilities (HEPs) for similar events across plants, there was no evidence for any systematic variation as a function of the HRA methods used in the analyses.
SEMATECH and the Department of Energy have established a Contamination Free Manufacturing Research Center (CFMRC) located at Sandia National Laboratories. One of the programs underway at the CFMRC is directed towards defect reduction in semiconductor process reactors by the application of computational modeling. The goal is to use fluid, thermal, plasma, and particle transport models to identify process conditions and tool designs that reduce the deposition rate of particles on wafers. The program is directed toward defect reduction in specific manufacturing tools, although some model development is undertaken when needed. The need to produce quantifiable improvements in tool defect performance requires the close cooperation among Sandia, universities, SEMATECH, SEMATECH member companies, and equipment manufacturers. Currently, both plasma (e.g., etch, PECVD) and nonplasma tools (e.g., LPCVD, rinse tanks) are being worked on under this program. In this paper the authors summarize their recent efforts to reduce particle deposition on wafers during plasma-based semiconductor manufacturing.
This is the final report on a series of experiments concerned with transient radiation-induced absorption in materials for a Cr,Nd:GSGG laser. Both the Sandia National Laboratories SPR III pulsed reactor and the Hermes III pulsed X-ray machine are used as radiation sources. The time dependence and the magnitude of the induced absorption in filter glasses and in doped and undoped LiNbO{sub 3} Q-switch materials have been measured. Gain has been observed in Cr,Nd:GSGG, the laser medium, when it is irradiated by X-rays.
Materials Research Society Symposium - Proceedings
Chason, E.
Understanding the evolution of porous silicon (PS) layers at the early stages of growth is important for determining the mechanism of PS film growth and controlling the film properties. We have used X-ray reflectivity (XRR) to determine the evolution of layer thickness and interfacial roughness during the growth of thin PS layers (< 200 nm) prepared by electrochemical anodization. The porous layer grows at a constant rate for films as thin as 15 nm indicating a very short incubation period during which the surface may be electropolished before the PS structure begins to form. Interface roughness measurements indicate that the top surface of the film remains relatively smooth during growth while the roughness of the PS/silicon interface increases only slightly with film thickness. The XRR results are compared with results obtained from the same films by cross-sectional transmission electron microscopy (XTEM), atomic force microscopy (AFM) and gravimetry.
We have used {sup 13}C magic-angle spinning (MAS) nuclear magnetic resonance (NMR) to characterize the structure and rotational dynamics of C{sub 60} containing oxygen molecules located in the interstitial sites of the fcc lattice. Under normal conditions, a narrow peak at 143.7 ppm is observed for C{sub 60}. When exposed to oxygen at moderate pressures, several additional resonances appear in the {sup 13}C MAS NMR spectrum. These secondary resonances are shifted downfield from the main peak at 143.7 ppm and are due to the Fermi-contact interaction of the paramagnetic oxygen molecules with the {sup 13}C nuclear spins. The presence of oxygen depresses the orientational ordering transition by ca. 20 K as observed by DSC. The spin-lattice relaxation time (T{sub 1}) of each secondary peak shows a minimum near the ordering transition, indicating that this transition is not dependent on the number of oxygen molecules surrounding an individual C{sub 60} molecule. The T{sub 1}, due to paramagnetic relaxation, normalized by the number of surrounding oxygen molecules, is constant. This observation demonstrates that within a given sample, the dynamics of C{sub 60} molecules are independent of the number of surrounding oxygen molecules.
This paper describes a process of combining two state-of-the-art CFD tools, SPRINT and INCA, in a manner which extends the utility of both codes beyond what is possible from either code alone. The speed and efficiency of the PNS code, SPRINT, has been combined with the capability of a Navier-Stokes code to model fully elliptic, viscous separated regions on high performance, high speed flight systems. The coupled SPRINT/rNCA capability is applicable for design and evaluation of high speed flight vehicles in the supersonic to hypersonic speed regimes. This paper describes the codes involved, the interface process and a few selected test cases which illustrate the SPRINT/INCA coupling process. Results have shown that the combination of SPRINT and INCA produces correct results and can lead to improved computational analyses for complex, three-dimensional problems.
Sampling during environmental drilling is essential to fully characterize the spatial distribution and migration of near surface contaminants. However, the analysis of these samples is not only expensive, but can take weeks or months when sent to an off-site laboratory. In contrast, measurement-while-drilling (MWD) screening capability could save money and valuable time by quickly distinguishing between contaminated and uncontaminated areas. Real-time measurements provided by a MVM system would enable on-the-spot decisions to be made regarding sampling strategies, enhance worker safety, and provide the added flexibility of being able to ``steer`` the drill bit in or out hazardous zones. During measurement-while-drilling, down-hole sensors are located behind the drill bit and linked by a rapid data transmission system to a computer at the surface. As drilling proceeds, data are collected on the nature and extent of the subsurface contamination in real-time. The down-hole sensor is a Geiger-Mueller tube (GMT) gamma radiation detector. In addition to the GMT signal, the MWD system monitors these required down-hole voltages and two temperatures associated with the detector assembly. The Gamma Ray Detection System (GRDS) and electronics package are discussed in as well as the results of the field test. Finally, our conclusions and discussion of future work are presented.
The effect of the pump, signal, and idler wave phases on three-wave nonlinear parametric mixing is investigated in a series of single-pass- gain experiments. Measurements are made with two angle-tuned KTP crystals in a 532 nm pumped, walkoff-compensated, optical parametric amplifier that is seeded by an 800 nm cw diode laser. In one of the measurements the second crystal is orientated to have its effective nonlinearity deff. of opposite sign to that of the first crystal, so that all mixing that occurred in the first crystal is canceled by the second when the phase mismatch Δkcrystal 1 = Δkcrystal 2 = 0. Efficient two-crystal amplification is subsequently restored by selecting the correct phase relationship for the three waves entering the crystal by inserting a dispersive plate between the crystals. The experimental results are explained in a straightforward manner with diagrams involving the three input wave polarizations. These results demonstrate that walkoff-compensated geometries require phase correction to achieve efficient mixing in the second crystal whenever the nonlinear interaction involves two extraordinary waves (e-waves). One practical application of this work may be lower oscillation thresholds and enhanced performance in walkoff-compensated optical parametric oscillators which use two e-waves.
This report summarizes two approaches to time-optimal control of a nonlinear magnetically levitated platen. The system of interest is a candidate technology for next-generation photolithography machines used in the manufacture of integrated circuits. The dynamics and the variable peak control force of the electro-magnetic actuators preclude the direct application of classical time-optimal control methodologies for determining optimal rest-to-rest maneuver strategies. Therefore, this study explores alternate approaches using a previously developed computer simulation. In the first approach, conservative estimates of the available control forces are used to generate suboptimal switching curves. In the second approach, exact solutions are determined iteratively and used as a training set for an artificial neural network. The trained network provides optimal actuator switching times that incorporate the full nonlinearities of the magnetic levitation actuators. Sample problems illustrate the effectiveness of these techniques as compared to traditional proportional-derivative control.
The Critical Dynamics in Microgravity Experiment, DYNAMX, is under development for space flight at Sandia National Laboratories and the University of New Mexico with Dr. Rob Duncan as the Principal Investigator. This experiment will investigate the effects on the superfluid transition in 4He of currents generated by heat flow, measuring the thermal conductivity in the fluid as a function of applfed heat. DYNAMX will also take advantage of the weightless environment to measure the conductivity properties in the region of the interface between the two phases. Thus, DYNAMX represents an experiment that will explore a system driven far from equilibrium. The experiment development is sponsored by the Microgravity Science and Applications Division of NASA, with the Jet Propulsion Laboratory as the managing center. This paper will describe the science objectives, the current design of the experiment apparatus, the steps being taken to prepare this experiment for flight, and the results of ground-based feasibility demonstrations now underway.
We present magnetoluminescence data which provides a quantitative measure of the energy- band dispersion curves of novel compound semiconductor optoelectronic materials. Data for a n-type strained-layer InGaAs/GaAs (quantum-well width approximately 8 nm) and a n-type 4.5 nm-wide GaAs/AlGaAs lattice-matched single-quantum well are presented. We find that the conduction-bands are almost parabolic, with a mass of about 0.068m0 for the GaAs/AlGaAs structure. The valence-bands are nonparabolic with wave vector dependent in- plane valence-band masses varying from about 0.1m0 at zone center to about 0.3m0 for 20 meV energies.
Materials Research Society Symposium - Proceedings
Schwartz, Robert W.
Sol-gel processing methods are frequently used for the fabrication of lead zirconate titanate (PZT) thin films for many electronic applications. Our standard approach for film fabrication utilizes lead acetate and acetic acid modified metal alkoxides of zirconium and titanium in the preparation of our precursor solutions. This report highlights some of our recent results on the effects of the addition of a second chelating ligand, acetylacetone, to this process. We discuss the changes in film drying behavior, densification and ceramic microstructure which accompany acetylacetone additions to the precursor solution and relate the observed variations in processing behavior to differences in chemical precursor structure induced by the acetylacetone ligand. Improvements in thin film microstructure, ferroelectric and optical properties are observed when acetylacetone is added to the precursor solution.
Active control of structures has been under intensive development for the last ten years. Reference 2 reviews much of the identification and control technology for structural control developed during this time. The technology was initially focused on space structure and weapon applications; however, recently the technology is also being directed toward applications in manufacturing and transportation. Much of this technology focused on multiple-input/multiple-output (MIMO) identification and control methodology because many of the applications require a coordinated control involving multiple disturbances and control objectives where multiple actuators and sensors are necessary for high performance. There have been many optimal robust control methods developed for the design of MIMO robust control laws; however, there appears to be a significant gap between the theoretical development and experimental evaluation of control and identification methods to address structural control applications. Many methods have been developed for MIMO identification and control of structures, such as the Eigensystem Realization Algorithm (ERA), Q-Markov Covariance Equivalent Realization (Q-Markov COVER) for identification; and, Linear Quadratic Gaussian (LQG), Frequency Weighted LQG and H-/ii-synthesis methods for control. Upon implementation, many of the identification and control methods have shown limitations such as the excitation of unmodelled dynamics and sensitivity to system parameter variations. As a result, research on methods which address these problems have been conducted.
This paper describes numerical simulations that were performed to study laminar flow through a square duct with a 90° bend. The purpose of this work was two fold. First, an improved understanding was desired of the flow physics involved in the generation of secondary vortical flows in three-dimensions. Second, adaptive gridding techniques for structured grids in three-dimensions were investigated for die purpose of determining their utility in low Reynolds number, incompressible flows. It was also of interest to provide additional validation of the commercial computer code CFD-ACE. Velocity predictions for both non-adaptive and adaptive grids are compared with experimental data. Flow visualization was used to examine the characteristics of the flow though the curved duct in order to better understand the viscous flow physics of this problem. Generally fair agreement with the experimental data was found, but questions were raised concerning the accuracy of the experimental data. The adaptive grids did not significantly improve the accuracy of the results beyond the non-adaptive grid solution with a similar number of points.
Since both FeS2 and MoS2 are optically opaque and have bandgaps in the near IR, photochemical applications of these materials are non-existent. It is however demonstrated in the study that nanosize FeS2 and MoS2 have bandgaps that can be adjusted to the visible and even UV region of the spectrum by control of the cluster size. Discussed are measurements of size, structure, optical absorbance and photoemission for these new materials. Also, briefly outlines are synthetic procedures and novel methods for chemical processing of these nanoclusters.
We report a real-time, two-dimensional light scattering study of the evolution of structure of a two component nonionic micelle system undergoing phase separation. The micelles act like molecular slug-a-beds whose domain growth is pathetically lathargic (i.e. slower than the cube root of time prediction for simple binary fluids). In fact, the growth kinetics can be empirically described as a stretched exponential approach to a pinned domain size. Although the kinetics are not yet understood, this anomalous behavior may be due to the ability of the spherical micelles to reorganize into more complex structures.
Proceedings of SPIE - The International Society for Optical Engineering
Parker, Gordon G.
A jib crane consists of a pendulum-like end line attached to a rotatable jib. Within this general category of cranes there exist devices with multiple degrees of freedom including variable load-line length and variable jib length. These cranes are commonly used for construction and transportation applications. Point-to-point payload maneuvers using jib cranes are performed so as not to excite the spherical pendulum modes of their cable and payload assemblies. Typically, these pendulum modes, although time-varying, exhibit low frequencies. The resulting maneuvers are therefore performed slowly, contributing to high construction and transportation costs. The crane considered here consists of a spherical pendulum attached to a rigid jib. The other end of the jib is attached to a direct drive motor of generating rotational motion. A general approach is presented for determining the open-loop trajectories for the jib rotation for accomplishing fixed-time, point-to-point, residual oscillation free, symmetric maneuvers. These residual oscillation free trajectories purposely excite the pendulum modes in such a way that at the end of the maneuver the oscillatory degrees of freedom are quiescent. Simulation results are presented with experimental verification.
First-principles density-functional calculations utilizing ab initio pseudopotentials and plane- wave expansions are used to determine lattice parameters, bulk moduli, and band structures for AlN, GaN, and InN. It is found that large numbers of plane waves are necessary to resolve the nitrogen 2p wave functions and that explicit treatment of the gallium 3d and indium 4d electrons is important for an accurate description of GaN and InN. Several properties of ternary zinc-blende alloys are determined including their bond-length and bond-angle relaxation and their energy-gap bowing parameters. The similarity of the calculated zinc- blende and wurtzite direct gaps also allows estimates to be made of the energy gap versus composition for wurtzite alloys.
A series of experiments was conducted to determine hydrogen combustion behavior under conditions of rapidly condensing steam caused by water sprays. Experiments were conducted in the Surtsey facility under conditions that were nearly prototypical of those that would be expected in a severe accident in the CE System 80+ containment. Mixtures were initially nonflammable owing to dilution by steam. The mixtures were ignited by thermal glow plugs when they became flammable after sufficient steam was removed by condensation caused by water sprays. No detonations or accelerated flame propagation was observed in the Surtsey facility. The combustion mode observed for prototypical mixtures was characterized by multiple deflagrations with relatively small pressure rises. The thermal glow plugs were effective in burning hydrogen safely by igniting the gases as the mixtures became marginally flammable.
This report identifies the key features noted as requirements in the diagnostic decision-making process of Single Photon Emission Computed Tomography (SPECT) cardiac imaging. The report discusses the critical issues that create the basic system framework for design of an automatic target recognizer (ATR) algorithm prototype to support diagnosis of coronary artery disease. Candidate feature discovery algorithms that may form the basis of future work include Adaptive Resonance Theory and Bayesian Decision Network. A framework for the practitioner-Human-System-Interface would include baseline patient history and demographic data; reference cardiac imagery history; and current overlay imagery to provide complementary information (i.e., coronary angiography, echocardiography, and SPECT images). The goal is to design a prototype that would represent a fused present and historical {open_quotes}whole{close_quotes} functional, structural, and physiologic cardiac patient model. This framework decision-assisting platform would be available to practitioner and student alike, with no {open_quotes}real-world{close_quotes} consequences.
This report describes the process used by Sandia National Laboratories, New Mexico to characterize weapon hardware for disposition. The report describes the following basic steps: (1) the drawing search process and primary hazard identification; (2) the development of Disassembly Procedures (DPs), including demilitarization and sanitization requirements; (3) the generation of a ``disposal tree``; (4) generating RCRA waste disposal information; and (5) documenting the information. Additional data gathered during the characterization process supporting hardware grouping and recycle efforts is also discussed.
Supercomputing `94, a high-performance computing and communications conference, was held November 14th through 18th, 1994 in Washington DC. For the past four years, Sandia National Laboratories has used this conference to showcase and focus its communications and networking endeavors. At the 1994 conference, Sandia built a Switched Multimegabit Data Service (SMDS) network running at 44.736 megabits per second linking its private SMDS network between its facilities in Albuquerque, New Mexico and Livermore, California to the convention center in Washington, D.C. For the show, the network was also extended from Sandia, New Mexico to Los Alamos National Laboratory and from Sandia, California to Lawrence Livermore National Laboratory. This paper documents and describes this network and how it was used at the conference.
The interstitial oxygen (O{sub i}) concentration in Czochralski silicon and the subsequent SiO{sub x} precipitation are important parameters for integrated circuit fabrication. Uncontrolled SiO{sub x} precipitation during processing can create detrimental mechanical and electrical effects that contribute to poor performance. An inability to consistently and accurately measure the initial O{sub i} concentration in heavily doped silicon has led to contradictory results regarding the effects of dopant type and concentration on SiO{sub x} precipitation. The authors have developed a software package for reliably determining and comparing O{sub i} in heavily doped silicon. The SiFTIR{copyright} code implements three independent oxygen analysis methods in a single integrated package. Routine oxygen measurements are desirable over a wide range of silicon resistivities, but there has been confusion concerning which of the three numerical methods is most suitable for the low resistivity portion of the continuum. A major strength of the software is an ability to rapidly produce results for all three methods using only a single Fourier Transform Infrared Spectroscopy (FTIR) spectrum as input. This ability to perform three analyses on a single data set allows a detailed comparison of the three methods across the entire range of resistivities in question. Integrated circuit manufacturers could use the enabling technology provided by SiFTIR{copyright} to monitor O{sub i} content. Early detection of O{sub i} using this diagnostic could be beneficial in controlling SiO{sub x} precipitation during integrated circuit processing.
FITTING is a Fortran subroutine that constructs a smooth, generalized four-parameter probability distribution model. It is fit to the first four statistical moments of the random variable X (i.e., average values of X, X{sup 2}, X{sup 3}, and X{sup 4}) which can be calculated from data using the associated subroutine CALMOM. The generalized model is produced from a cubic distortion of the parent model, calibrated to match the first four moments of the data. This four-moment matching is intended to provide models that are more faithful to the data in the upper tail of the distribution. Examples are shown for two specific cases.
Rountree, S.L.K.; Whitehurst, H.O.; Tomlin, E.H.; Restrepo, L.F.; White, J.
This report documents a study (Stage Right Operational Safety Analysis) that was performed to evaluate the effects of new Stage Right operations on the safety of Pantex personnel who perform the operations and maintain the equipment. The primary concern of the evaluation was for personnel safety during Stage Right operations, but operations equipment damage and degradation also were taken into account. This analysis evaluates safety of the work process in the staging of dismantled nuclear weapon pits within the modified Richmond magazines only. This Stage Right Process and Operational Safety Analysis includes the following processes: moving the pelletized drums from the pallet trailer to the pallet turner, staging of pallets and removal of pallets from the magazine, recovery from an incident in a magazine, setting up, opening, and closing a Zone 4 magazine, inventory of pelletized drums in the magazines, transporting pelletized drums from Zone 12 to Zone 4, and maintenance on the shielded lift truck that involves removal of the cab shielding. The analysis includes the following undesirable consequences: injury to personnel, breach of an AL-R8 container, drop of a loaded pallet, damage to equipment, and equipment unreliability.
The development of two new probabilistic accident consequence codes, MACCS and COSYMA, was completed in 1990. These codes estimate the risks presented by nuclear installations based on postulated frequencies and magnitudes of potential accidents. In 1991, the US Nuclear Regulatory Commission (NRC) and the Commission of the European Communities (CEC) began a joint uncertainty analysis of the two codes. The ultimate objective of the joint effort was to develop credible and traceable uncertainty distributions for the input variables of the codes. Expert elicitation was identified as the best technology available for developing a library of uncertainty distributions for the selected consequence parameters. The study was formulated jointly and was limited to the current code models and to physical quantities that could be measured in experiments. Experts developed their distributions independently. To validate the distributions generated for the wet deposition input variables, samples were taken from these distributions and propagated through the wet deposition code model. Resulting distributions closely replicated the aggregated elicited wet deposition distributions. To validate the distributions generated for the dispersion code input variables, samples from the distributions and propagated through the Gaussian plume model (GPM) implemented in the MACCS and COSYMA codes. Project teams from the NRC and CEC cooperated successfully to develop and implement a unified process for the elaboration of uncertainty distributions on consequence code input parameters. Formal expert judgment elicitation proved valuable for synthesizing the best available information. Distributions on measurable atmospheric dispersion and deposition parameters were successfully elicited from experts involved in the many phenomenological areas of consequence analysis. This volume is the first of a three-volume document describing the project.
IEEE International Symposium on Electronics & the Environment
Anderson, D.J.; Cranwell, R.M.; Iman, R.; Van Buren, P.D.
Environmental regulations are encouraging the development of new environmentally conscious manufacturing (ECM) processes. However, the quality and reliability of these processes and hardware produced must be understood prior to implementing these new technologies in factories. Furthermore, military hardware fabrication is governed by standards and specifications that frequently mandate the use of older, less environmentally friendly processes or materials, or prohibit the use of new ECM processes without advance military approval. Sandia National Laboratories, with industrial and military partners, have developed methodologies for evaluating and qualifying new ECM processes for military and commercial applications, and have piloted these methodologies in qualifying new, low-residue soldering technologies and materials.
Proceedings - IEEE International Conference on Robotics and Automation
Chen, Pang C.
To address the need for a fast path planner, we present a learning algorithm that improves path planning by using past experience to enhance future performance. The algorithm relies on an existing path planner to provide solutions to difficult tasks. From these solutions, an evolving sparse network of useful robot configurations is learned to support faster planning. More generally, the algorithm provides a framework in which a slow but effective planner may be improved both cost-wise and capability-wise by a faster but less effective planner coupled with experience. We analyze the algorithm by formalizing the concept of improvability and deriving conditions under which a planner can be improved within the framework. The analysis is based on two stochastic models, one pessimistic (on task complexity), the other randomized (on experience utility). Using these models, we derive quantitative bounds to predict the learning behavior. We use these estimation tools to characterize the situations in which the algorithm is useful and to provide bounds on the training time. In particular, we show how to predict the maximum achievable speedup. Additionally, our analysis techniques are elementary and should be useful for studying other types of probabilistic learning as well.
Barrier layers to limit percolation through cover systems are principal features of engineered, multi-component cover designs. Conventional barrier layer components developed for humid climates have limitations in dry climates. One alternative barrier layer is a capillary barrier, which consists of a fine-over-coarse soil arrangement. The capacity of capillary barriers to laterally divert downward moving water is the key to their success. Another alternative is a dry barrier, in which atmospheric air is circulated through a coarse layer within the cover to remove water vapor. Incorporating a coarse layer which stores water for subsequent removal by air flow reduces the requirements for the air flow velocity and increases the applicability of the dry barrier.
The development of software for use in high-consequence systems mandates rigorous (formal) processes, methods, and techniques to improve the safety characteristics of those systems. This paper provides a brief overview of current research and practices in high-consequence software, including applied design methods. Some of the practices that are discussed include: fault tree analysis, failure mode effects analysis, petri nets, both hardware and software interlocks, n-version programming, Independent Vulnerability Analyses, and watchdogs. Techniques that offer improvement in the dependability of software in high-consequence systems applications are identified and discussed. Limitations of these techniques are also explored. Research in formal methods, the cleanroom process, and reliability models are reviewed. In addition, current work by several leading researchers as well as approaches being used by leading practitioners are examined.
The five Solar Electric Generating Systems (SEGS) at Kramer Junction, California, now have nearly 30 years of cumulative operating experience. These 30 MW plants employ parabolic trough technology originally deployed by LUZ International in the late 1980`s and are now managed, operated and maintained by the Kramer Junction Company. In this paper, Sandia National Laboratories performed an analysis of the annual energy production from the five plants. Annual solar-to-electric conversion efficiencies are calculated and the major factors that influenced the results are presented. The generally good efficiencies are primarily attributed to the excellent equipment availabilities achieved at all plants.
This paper describe a system that was added to an existing satellite-borne telescope design for the purpose of compensating the boresight errors that had been observed in earlier flights of similar instruments. Those errors had been found to be caused by thermal distortion of the spaceframe. This retrofit design was subject to severe volume restrictions because it was fitted into an already tightly-packaged instrument envelope. It was found practical to improve the basic design by converting a redundant structure into a statically-determinate one. It was also possible to use portions of the mechanical actuation system to facilitate the position encoding needed for computer interfacing.
A sinkhole was first observed in May 1992 over the outer edge of the two-tiered former salt mine that was converted for oil storage by the US Strategic Petroleum Reserve (SPR). Results of diagnostic studies which included geophysical, geochemical, drilling, and hydrological methods suggest a direct connection exists between the surface collapse area and the underground mine. The connection was confirmed by correlative measurements of sediment slump rates, piezometric surface deflection, and brine influx rates into the mine. The dissolution of salt below the sinkhole that initiated the leak into the mine was likely caused by several confluent geologic processes, and exacerbated by mining-induced stresses that created fractures which severed as hydrologic flowpaths. Modeling studies of mine stresses show that years of tensional stresses may be required before cracking begins to occur, but once begun can continue to develop, and relieve the stress in that specific regime. The crack regime creates the avenue for incursion of groundwater, very slowly initially, but gradually enlarging as undersaturated groundwater dissolves salt on the sides of the crack. Mitigative measures include increasing the mine pressurization, slowing the dissolution by injecting brine into the sinkhole throat, and permeation grouting in hydrologic flowpaths.
The intent of the WIPP, being constructed in the bedded geologic salt deposits of Southeastern New Mexico, is to provide the technological basis for the safe disposal of radioactive Transuranic (TRU) wastes generated by the defense programs of the United States. In determining this technological basis, advanced reliability and structural analysis techniques are used to determine the probability of time-to-closure of a hypothetical underground shaft located in an argillaceous salt formation and filled with compacted crushed salt. Before being filled with crushed salt for sealing, the shaft provides access to an underground facility. Reliable closure of the shaft depends upon the sealing of the shaft through creep closure and recompaction of crushed backfill. Appropriate methods are demonstrated to calculate cumulative distribution functions of the closure based on laboratory determined random variable uncertainty in salt creep properties.
In a time when many companies are trying to find a way to do more with less, they are missing the ``solution`` that is right before their eyes. Rather than trying to decide on whether to reengineer or process improve, they should be focused on their most valuable resource: people. This paper discusses the elements of leadership and how it applies to all individuals in an organization. To get outstanding results from people, they need to begin by making leadership everybody`s business.
Tax loads and required revenues are estimated for current and future solar central receiver and gas-fired plants competing in the same market. An economic measure of tax equity is used to evaluate the equity of the tax loads under past and present tax codes. The same measure is used to devise a tax strategy which produces the following two types of equitable taxation: (1) the two plants carry nearly equal tax loads, and (2) local, state and federal governments receive the same distribution of revenues from the solar plant as from the gas-fired plant `Me results show that central receivers (and likely other capital-intensive technologies) carry higher tax loads compared to competing gasfired generation, that tax loads are highly correlated with competitiveness, and that equitable taxation is feasible within the boundaries of the study.
Recent Sandia support of the Solar Two project has included the analysis of optical performance issues related to heliostat field improvements. Two types of heliostats will be used for the Solar Two project: The 1818 original 38.4 m{sup 2} Martin Marietta Co. heliostats, and 108 new 95 m{sup 2} Lugo heliostats. Carrisa Plains mirror modules will be used to construct the Lugo heliostats and refurbish original heliostats. Baseline, clean reflectivity measurements of 0.90 and 0.94 are recomended for the original heliostat and the Carrisa Plains modules, respectively. Sandia`s Beam Characterization System provided beam quality information for representative configurations of both heliostats. This showed that the replacement of two facets with Carrisa Plains modules on an original heliostat led to a slight increase in spillage, but also increased beam power. As expected, the large beam of the Lugo heliostat showed poorer beam quality and significant spillage, but proved to be an economical addition of reflective area. The Carrisa Plains modules were found to be nominally flat, although the focal length changed slightly with temperature. An analysis of the canting options for both types of heliostats was performed. It was recommended the original heliostats be canted with an on-axis, lookback method, whereas a two-step method using first on-, then off-axis approaches was recommended for the Lugo heliostats. Finally, measurements performed at the Daggett site showed that despite the 1992 Landers earthquake, heliostat pedestal tilt and the associated tracking errors are expected to be within acceptable limits.
Reflux heat-pipe receivers have been identified as a desirable interface to couple a Stirling-cycle engine with a parabolic dish solar concentrator. The reflux receiver provides power nearly isothermally to the engine heater heads while decoupling the heater head design from the solar absorber surface design. The independent design of the receiver and engine heater head leads to higher system efficiency. Heat pipe reflux receivers have been demonstrated at approximately 65 kW{sub t} power throughput. Several 25 to 30-kW{sub e} Stirling-cycle engines are under development, and will soon be incorporated in commercial dish-Stirling systems. These engines will require reflux receivers with power throughput limits reaching 90-kW{sub t}. The extension of heat pipe technology from 60 kW{sub t} to 100 kW{sub t} is not trivial. Current heat pipe wick technology is pushed to its limits. It is necessary to develop and test advanced wick structure technologies to perform this task. Sandia has developed and begun testing a Bekaert Corporation felt metal wick structure fabricated by Porous Metal Products Inc. This wick is about 95% porous, and has liquid permeability a factor of 2 to 8 times higher than conventional technologies for a given maximum pore radius. The wick has been successfully demonstrated in a bench-scale heat pipe, and a full-scale on-sun receiver has been fabricated. This report details the wick design, characterization and installation into a heat pipe receiver, and the results of the bench-scale tests are presented. The wick performance is modeled, and the model results are compared to test results.
The ecological risk assessment process in its ideal form is an unbiased approach for assessing the probability of harm to the environment as a consequence of a given action. This information can then be combined with other societal values and biases in the management of such risks. However, as the process currently is understood, decision makers often are accused of manipulating information in order to generate decisions or achieve buy in from the public in support of a particular political agenda. A clear understanding of the nature of the risk management process can help define areas where information should be free from social or personal bias, and areas where values and judgments are critical. The authors do not propose to discuss the individual`s decision-making process, but rather to address the social process of risk communication and environmentally-related decision-making, identifying which parts of that process require bias-free, scientifically generated information about the consequences of various actions and which parts need an understanding of the social values which underlie the informed choices among those possible actions.
Mass transport properties are important in polycrystalline materials used as protective films. Traditionally, such properties have been studied by examining model polycrystalline structures, such as a regular array of straight grain boundaries. However, these models do not account for a number of features of real grain ensembles, including the grain size distribution and variations in grain shape. In this study, a finite difference scheme is developed to study transient and steady-state mass transport through realistic two dimensional polycrystalline microstructures. Comparisons with the transport properties of traditional model microstructures provide regimes of applicability of such models. The effects of microstructural parameters such as average grain size are examined.
As Sandia National Laboratories and the Physical and Chemical Sciences Center develop an increasingly diverse set of customers, research partners, and Cooperative Research and Development Agreements (CRADA`s) with industry, there is a need for providing more concise information describing the technical achievements and capabilities. This publication, Research Briefs, is designed to inform the present and potential partners in research and technology advancement. The research emphasizes semiconductor physics, electronic materials, surface physics and chemistry, plasma and chemical processing sciences, lasers and optics, vision science, ion-solid interactions and defect physics, and advanced materials physics. The specific programs pursued are driven by the research goals which are greatly influenced by interactions with the government and industrial customers.
The peak thermal power generated in microelectronics assemblies has risen from less than 1 W/cm{sup 2} in 1980 to greater than 40 W/cm{sup 2} today, due primarily to increasing densities at both the IC and packaging levels. The authors have demonstrated enhanced heat transfer in a prototype Si substrate with a backside micro heat channel structure. Unlike conventional micro heat pipes, these channels are biaxial with a greater capacity for fluid transfer. Thermal modeling and preliminary experiments have shown an equivalent increase in substrate thermal conductivity to over 500 W/m{center_dot}K, or a four times improvement. Optimization of the structure and alternative liquids will further increase the thermal conductivity of the micro heat channel substrate with the objective being polycrystalline diamond, or about 1,200 W/m{center_dot}K. The crucial design parameters for the micro heat channel system and the thermal characteristics of the system will be covered.