Publications

Additive manufacturing of metal components enables rapid fabrication of complex geometries. However, metal additive manufacturing also introduces new morphological and microstructural characteristics which might be detrimental to component performance. Here we report the pitting corrosion properties of wrought and additively manufactured 316L stainless steel after atmospheric exposure to coastal environments and laboratory-created environments. Qualitative visualization in combination with quantitative analysis of resulting pits provided an in-depth understanding of pitting differences between wrought and additively manufactured 316L stainless steel and between coastal and laboratory-based exposure. Optical and scanning electron microscopy were utilized for visualization, while white light interferometry measured pits across approximately 5mm x 5mm areas on each sample. Post-processing of the interferometry data enables quantification of pitting attack for each sample in terms of both pit depth and pit volume. The pitting analysis introduced herein offers a new technique to compare pitting attack between different manufacturing processes and materials.

The development of additively-manufactured (AM) 316L stainless steel (SS) using laser powder bed fusion (LPBF) has enabled near net shape components from a corrosion-resistant structural material. In this article, we present a multiscale study on the effects of processing parameters on the corrosion behavior of as-printed surfaces of AM 316L SS formed via LPBF. Laser power and scan speed of the LPBF process were varied across the instrument range known to produce parts with >99 % density, and the macroscale corrosion trends were interpreted via microscale and nanoscale measurements of porosity, roughness, microstructure, and chemistry. Porosity and roughness data showed that porosity φ decreased as volumetric energy density Ev increased due to a shift in the pore formation mechanism and that roughness Sq was due to melt track morphology and partially fused powder features. Cross-sectional and plan-view maps of chemistry and work function ϕs revealed an amorphous Mn-silicate phase enriched with Cr and Al that varied in both thickness and density depending on Ev. Finally, the macroscale potentiodynamic polarization experiments under full immersion in quiescent 0.6 M NaCl showed significant differences in breakdown potential Eb and metastable pitting. In general, samples with smaller φ and Sq values and larger ϕs values and homogeneity in the Mn-silicate exhibited larger Eb. The porosity and roughness effects stemmed from an increase to the overall number of initiation sites for pitting, and the oxide phase contributed to passive film breakdown by acting as a crevice former or creating a galvanic couple with the SS.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.

Abstract not provided.