Publications

Dexheimer, Darielle -.; Mei, Fan M.; Longbottom, Casey M.; Rohr, Garth R.; Cook, RaeAnn L.; Hardesty, Jasper O.

Abstract not provided.

Wheeler, Lauren B.; Roesler, Erika L.; Bowman, Daniel B.; Glen, Andrew G.; Miller, Phil; Martinez-Sanchez, Andres M.; Dexheimer, Darielle D.; Rohr, Garth R.; Pfeifer, Kent B.; Sharp, Zachary S.; Wostbrock, Jordan W.; Moorman, Matthew W.

Abstract not provided.

Wheeler, Lauren B.; Glen, Andrew G.; Roesler, Erika L.; Bowman, Daniel B.; Miller, Philip R.; Sanchez, A.L.; Dexheimer, Darielle D.; Rohr, Garth R.; Pfeifer, Kent B.; Sharp, Zachary S.; Wostbrock, Jordan W.

Abstract not provided.

Dexheimer, Darielle D.; Mei, Fan M.; kuang, chongai k.; Longbottom, Casey M.; Rohr, Garth R.; Hardesty, Jasper O.

Abstract not provided.

Jones, Brad H.; Rohr, Garth R.; Kaczmarowski, Amy K.

Abstract not provided.

Proceedings of SPIE - The International Society for Optical Engineering

Jones, Brad H.; Rohr, Garth R.; Kaczmarowski, Amy K.

Fiber Bragg gratings (FBGs) are well-suited for embedded sensing of interfacial phenomena in materials systems, due to the sensitivity of their spectral response to locally non-uniform strain fields. Over the last 15 years, FBGs have been successfully employed to sense delamination at interfaces, with a clear emphasis on planar events induced by transverse cracks in fiber-reinforced plastic laminates. We have built upon this work by utilizing FBGs to detect circular delamination events at the interface between epoxy films and alumina substrates. Two different delamination processes are examined, based on stress relief induced by indentation of the epoxy film or by cooling to low temperature. We have characterized the spectral response pre-and post-delamination for both simple and chirped FBGs as a function of delamination size. We show that delamination is readily detected by the evolution of a non-uniform strain distribution along the fiber axis that persists after the stressing condition is removed. These residual strain distributions differ substantially between the delamination processes, with indentation and cooling producing predominantly tensile and compressive strain, respectively, that are well-captured by Gaussian profiles. More importantly, we observe a strong correlation between spectrally-derived measurements, such as spectral widths, and delamination size. Our results further highlight the unique capabilities of FBGs as diagnostic tools for sensing delamination in materials systems.

Rohr, Garth R.; Miller, William K.; Davis, Ryan A.; Calkins, David C.; Roach, R.A.; Walsh, David S.; McElhanon, James R.; rasberry, Roger D.

Abstract not provided.

Rohr, Garth R.; Rasberry, Roger D.; Kaczmarowski, Amy K.; Stavig, Mark E.; Gibson, Cory S.; Roach, R.A.; Nation, Brendan L.

Abstract not provided.

Proceedings of SPIE - The International Society for Optical Engineering

Rasberry, Roger D.; Rohr, Garth R.; Miller, William K.; Udd, Eric; Blach, Noah T.; Davis, Ryan A.; Olson, Walter R.; Calkins, David C.; Roach, R.A.; Walsh, David S.; McElhanon, James R.

The assurance of the integrity of adhesive bonding at substrate interfaces is paramount to the longevity and sustainability of encapsulated components. Unfortunately, it is often difficult to non-destructively evaluate these materials to determine the adequacy of bonding after manufacturing and then later in service. A particularly difficult problem in this regard is the reliable detection/monitoring of regions of weak bonding that may result from poor adhesion or poor cohesive strength, or degradation in service. One promising and perhaps less explored avenue we have recently begun to investigate for this purpose centers on the use of (chirped) fiber Bragg grating sensing technology. In this scenario, a grating is patterned into a fiber optic such that a (broadband) spectral reflectance is observed. The sensor is highly sensitive to local and uniform changes across the length of the grating. Initial efforts to evaluate this approach for measuring adhesive bonding defects at substrate interfaces are discussed. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Proceedings of SPIE - The International Society for Optical Engineering

Rohr, Garth R.; Rasberry, Roger D.; Kaczmarowski, Amy K.; Stavig, Mark E.; Gibson, Cory S.; Udd, Eric; Roach, R.A.; Nation, Brendan

Internal residual stresses and overall mechanical properties of thermoset resins are largely dictated by the curing process. It is well understood that fiber Bragg grating (FBG) sensors can be used to evaluate temperature and cure induced strain while embedded during curing. Herein, is an extension of this work whereby we use FBGs as a probe for minimizing the internal residual stress of an unfilled and filled Epon 828/DEA resin. Variables affecting stress including cure cycle, mold (release), and adhesion promoting additives will be discussed and stress measurements from a strain gauge pop-off test will be used as comparison. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

Stromberg, Peter G.; Tandon, Rajan T.; Gibson, Cory S.; Reedlunn, Benjamin R.; Rasberry, Roger D.; Rohr, Garth R.

Future remote sensing applications will require higher resolution and therefore higher data rates (up to perhaps 100 gigabits per second) while achieving lower mass and cost. A current limitation to the design space is high speed high bandwidth data does not cross movable gimbals because of cabling issues. This requires the detectors to be off gimbal. The ability to get data across the gimbal would open up efficiencies in designs where the detectors and the electronics can be placed anywhere on the system. Fiber optic cables provide light weight high speed high bandwidth connections. Current options are limited to 20,000 cycles as opposed to the 1,000,000 cycles needed for future space based applications. To extend this to the million+ regime, requires a thorough understanding of the failure mechanisms and the materials, proper selection of materials (e.g., glass and jacket material) allowable geometry changes to the cable, radiation hardness, etc.

Rohr, Garth R.

Abstract not provided.