Publications

Skulborstad, A.J., Madison, J., Polonsky, A.T., Jin, H., Jones, A.R., Sanborn, B., Kramer, S.L.B., Antoun, B.R., Lu, W., Karlson, K.N., & Karlson, K.N. (2023). Toward accurate prediction of partial-penetration laser weld performance informed by three-dimensional characterization – Part II: μCT based finite element simulations. Tomography of Materials and Structures, 2. 10.1016/j.tmater.2023.100007

Lu, W., Jin, H., Foulk, J.W., Ostien, J.T., Kramer, S.L.B., Jones, A.R., & Jones, A.R. (2021). Solid Cylinder Torsion for Large Shear Deformation and Failure of Engineering Materials. Experimental Mechanics, 61(2), pp. 307-320. 10.1007/s11340-020-00620-6

Song, B., Sanborn, B., Lu, W., & Lu, W. (2019). Experimental Measurement and Analysis of Stress/Shock Wave Propagation Speed through Pre-strained Silicone Foam Pads under Lateral Confinement. Journal of Dynamic Behavior of Materials, 5(2), pp. 170-179. 10.1007/s40870-019-00196-w

Jin, H., Lu, W., Foulk, J.W., Ostien, J.T., & Ostien, J.T. (2019). Study solid cylinder torsion using 360o DIC [Conference Poster]. https://www.osti.gov/biblio/1640586

Foulk, J.W., Lu, W., Jin, H., Ostien, J.T., & Ostien, J.T. (2019). Understanding the role of rate dependence temperature dependence and hardening on the localization of solid alloy bars under torsion [Conference Poster]. https://www.osti.gov/biblio/1639416

Lu, W., Jin, H., Foulk, J.W., Ostien, J.T., & Ostien, J.T. (2019). Solid Cylindrical Bar Torsion for Characterizing Shear Plastic Deformation and Failure [Conference Poster]. 10.1007/978-3-030-29986-6_9

Song, B., Sanborn, B., Lu, W., & Lu, W. (2019). Radial inertia effect on dynamic compressive response of polymeric foam materials. Conference Proceedings of the Society for Experimental Mechanics Series, 59(1), pp. 85-87. 10.1007/s11340-018-0431-2

Sanborn, B., Song, B., Lu, W., & Lu, W. (2018). Poisson's Ratio Induced Radial Inertia Confinement during Dynamic Compression of Hyperelastic Foams [Conference Poster]. EPJ Web of Conferences. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85053671443&origin=inward

Jin, H., Lu, W., Nissen, A.E.H., Nelson, K., Briggs, T., & Briggs, T. (2018). Mechanical Properties of Woven Composites at Ambient Temperature. 10.2172/1463448

Sanborn, B., Song, B., Lu, W., & Lu, W. (2018). Poisson's Ratio Induced Radial Inertia During Dynamic Compression of Hyperelastic Foams [Conference Poster]. 10.1051/epjconf/201818302007

Song, B., Sanborn, B., Lu, W., & Lu, W. (2018). Radial Inertia Effect on Dynamic Compressive Response of Polymeric Foam Materials [Conference Poster]. 10.1007/978-3-319-95089-1_13

Lu, W., Jin, H., & Jin, H. (2018). Compression and Shear Response of 3D Printed Foam Pads [Conference Poster]. 10.1007/978-3-319-95083-9_4

Song, B., Sanborn, B., Lu, W., & Lu, W. (2018). Poisson's ratio induced radial inertia effect in hyperelastic foams during dynamic compression [Conference Poster]. https://www.osti.gov/biblio/1508704

Neilsen, M.K., Lu, W., Werner, B.T., Scherzinger, W.M., Lo, C.S., & Lo, C.S. (2018). Flexible Foam Model. 10.2172/1426546

Lu, W. (2018). Compression and Shear Response of 3D Printed Foam Pads [Conference Poster]. 10.1007/978-3-319-95083-9_4

Lu, W., Yang, N., Yee, J.K., Karnesky, R.A., & Karnesky, R.A. (2017). Mechanical properties of Additively Manufactured SS316L [Presentation]. https://www.osti.gov/biblio/1512060

Abelow, A.E., Nissen, A.E.H., Whinnery, L.L., Lu, W., & Lu, W. (2017). Aging of Conductively Filled Adhesives [Conference Poster]. https://www.osti.gov/biblio/1465095

Whinnery, L.L., Abelow, A.E., Lu, W., Reyes, K.R., Ward, D.K., Foulk, J.W., Meinelt, Z., le Galloudec, N.J., Ver Berkmoes, A.A., Friddle, R., & Friddle, R. (2017). Radiation Effects on Teflon Wires [Conference Poster]. https://www.osti.gov/biblio/1467984

Whinnery, L.L., Abelow, A.E., Lu, W., Reyes, K.R., Ward, D.K., Foulk, J.W., Meinelt, Z., le Galloudec, N.J., Ver Berkmoes, A.A., Friddle, R., & Friddle, R. (2017). Radiation Effects on Teflon Wires [Conference Poster]. https://www.osti.gov/biblio/1467983

Yang, N., Lu, W., Yee, J.K., Reynolds, T.B., & Reynolds, T.B. (2017). Physical Metallurgy and Structural Integrity of the 316L SS 3-D AM prototypes [Conference Poster]. https://www.osti.gov/biblio/1456775

Yang, N., Lu, W., Yee, J.K., & Yee, J.K. (2017). Mechanical deformation of the 316L stainless steel prototype produced by 3-D additive manufacturing (AM) printing [Conference Poster]. https://www.osti.gov/biblio/1456776

Whinnery, L.L., Abelow, A.E., Lu, W., Friddle, R., & Friddle, R. (2017). Radiation Effects on Teflon Wires [Conference Poster]. https://www.osti.gov/biblio/1457937

Neilsen, M.K., Werner, B.T., Lu, W., Lo, C.S., & Lo, C.S. (2017). Flex Foam Model for Rigid and Flexible Foams [Conference Poster]. https://www.osti.gov/biblio/1456511

Yang, N., Yee, J.K., Zheng, B., Gaiser, K., Reynolds, T.B., Clemon, L., Lu, W., Schoenung, J.M., Lavernia, E.J., & Lavernia, E.J. (2017). Process-Structure-Property Relationships for 316L Stainless Steel Fabricated by Additive Manufacturing and Its Implication for Component Engineering. Journal of Thermal Spray Technology. 10.1007/s11666-016-0480-y

Lu, W., Yang, N., Yee, J.K., Connelly, K., & Connelly, K. (2017). Characterization of Mechanical Properties of 3-D LENS and PBF Printed Prototypes [Conference Poster]. https://www.osti.gov/biblio/1456633

Lu, W., Yang, N., Yee, J.K., Connelly, K., & Connelly, K. (2017). Mechanical Properties of 3-D LENS and PBF Printed Stainless Steel 316L Prototypes [Conference Poster]. 10.1007/978-3-319-62834-9_6

Werner, B.T., Lu, W., Connelly, K., & Connelly, K. (2017). Compression testing of aged low density flexible polyurethane foam [Conference Poster]. Conference Proceedings of the Society for Experimental Mechanics Series. 10.1007/978-3-319-42028-8_17

Yang, N., Lu, W., Yee, J.K., Gaiser, K., Reynolds, T.B., & Reynolds, T.B. (2016). 3-D AM prototyping and the geometric factor on mechanical behavior and property of 316L stainless steel [Conference Poster]. https://www.osti.gov/biblio/1427054

Lu, W., Yang, N., Yee, J.K., Connelly, K., & Connelly, K. (2016). Mechanical Properties of 3-D PBF Printed Stainless Steel 316L Prototypes [Conference Poster]. 10.1007/978-3-319-62834-9_6

Yang, N., Lu, W., Yee, J.K., & Yee, J.K. (2016). Material science path toward AM material assurance and product qualification [Conference Poster]. https://www.osti.gov/biblio/1408955

Newell, P., Hinnerichs, T.D., Jin, H., Lu, W., Nelson, K., Connelly, K., & Connelly, K. (2016). Computational Modeling of a Thermoplastic Polymer under Different Condition [Conference Poster]. https://www.osti.gov/biblio/1398848

Lu, W., Koohbor, B., Kidane, A., & Kidane, A. (2016). Characterizing the constitutive response and energy absorption of rigid polymeric foams subjected to intermediate-velocity impact. Polymer Testing, 54(C), pp. 48-58. https://doi.org/10.1016/j.polymertesting.2016.06.023

Lu, W., Koohbor, B., Kidane, A., Sutton, M.A., & Sutton, M.A. (2016). Investigation of the dynamic stress-strain response of compressible polymeric foam using a non-parametric analysis. International Journal of Impact Engineering, 91(C), pp. 170-182. 10.1016/j.ijimpeng.2016.01.007

Lu, W., Neidigk, M., Wyatt, N.B., & Wyatt, N.B. (2016). Cyclic Loading Experiment for Characterizing Foam Viscoelastic Behavior [Conference Poster]. 10.1007/978-3-319-42028-8_16

Werner, B.T., Lu, W., Connelly, K., & Connelly, K. (2016). Compression Testing of Aged Low Density Flexible Polyurethane Foam [Conference Poster]. 10.1007/978-3-319-42028-8_17

Yang, N., Yee, J.K., Lu, W., Lavernia, E.J., Gaiser, K., Clemon, L., Zheng, B., Julie, S., & Julie, S. (2016). Process-Structure-Property Relationship for Additive Manufacturing 3-D LENS Printing [Conference Poster]. https://www.osti.gov/biblio/1343791

Neilsen, M.K., Lu, W., Scherzinger, W.M., Hinnerichs, T.D., Lo, C.S., & Lo, C.S. (2016). Unified creep plasticity damage (UCPD) model for rigid polyurethane foams [Conference Poster]. Conference Proceedings of the Society for Experimental Mechanics Series. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84952360126&origin=inward

Jin, H., Lu, W., Foulk, J.W., Mota, A., & Mota, A. (2015). 3D Deformation Field Throughout the Interior of Materials [Conference Poster]. https://www.osti.gov/biblio/1324422

Song, B., Lu, W., & Lu, W. (2015). Effect of twist on transverse impact response of ballistic fiber yarns. International Journal of Impact Engineering, 85(C), pp. 1-4. 10.1016/j.ijimpeng.2015.06.005

Koohbor, B., Mallon, S., Kidane, A., Lu, W., & Lu, W. (2015). The deformation and failure response of closed-cell PMDI foams subjected to dynamic impact loading. Polymer Testing, 44(C), pp. 112-124. 10.1016/j.polymertesting.2015.03.016

Jin, H., Lu, W., Nelson, K., Newell, P., Hinnerichs, T.D., & Hinnerichs, T.D. (2015). Characterization of a Thermoplastic Polymer at Different Environments [Conference Poster]. https://www.osti.gov/biblio/1261583

Neilsen, M.K., Lu, W., Scherzinger, W.M., Hinnerichs, T.D., Lo, C.S., & Lo, C.S. (2015). Unified Creep Plasticity Damage (UCPD) Model for Rigid Polyurethane Foams. 10.2172/1183947

Neilsen, M.K., Dion, K., Boyce, B.L., Lu, W., & Lu, W. (2015). Instabilities Predicted by Plasticity Models for Metals [Conference Poster]. https://www.osti.gov/biblio/1256553

Newell, P., Hinnerichs, T.D., Jin, H., Lu, W., Nelson, K., Connelly, K., & Connelly, K. (2015). Computational Modeling of a Thermoplastic Polymer under Different Condition [Conference Poster]. https://www.osti.gov/biblio/1260373

Lu, W., Brown, A., Yang, N., Koripella, C.R., Reyes, K.R., Zhou, X., Nelson, S.M., & Nelson, S.M. (2015). Effects of Thermal Aging and Manufacture Induced Stress on Structure Integrity and Performance of TE Module [Conference Poster]. https://www.osti.gov/biblio/1258253

Neilsen, M.K., Lu, W., Scherzinger, W.M., Hinnerichs, T.D., Lo, C.S., & Lo, C.S. (2015). Unified Creep Plasticity Damage (UCPD) Model for Rigid Polyurethane Foams [Conference Poster]. https://www.osti.gov/biblio/1246870

Lu, W. (2015). Compression of Silicone Foams [Conference Poster]. https://www.osti.gov/biblio/1240342

Reedlunn, B., Lu, W., & Lu, W. (2014). An attempt to calibrate and validate a simple ductile failure model against axial-torsion experiments on Al 6061-T651. 10.2172/1167405

Lu, W. (2014). Mechanical Characterization of Rigid Polyurethane Foams. 10.2172/1166886

Jin, H., Lu, W., Nelson, K., & Nelson, K. (2014). Mechanical Characterization of Fiber Reinforced Polymer Composites [Conference Poster]. https://www.osti.gov/biblio/1367572

Lu, W., Jin, H., & Jin, H. (2014). Multiaxial Ductile Failure of Aluminum Alloys [Conference Poster]. https://www.osti.gov/biblio/1315385

Hammetter, C.I., Hinnerichs, T.D., Lu, W., & Lu, W. (2014). Modeling the Behavior of Cellular Silicone Pads in the Structure-Continuum Transition [Presentation]. https://www.osti.gov/biblio/1576105

Reedlunn, B., Lu, W., & Lu, W. (2014). Calibration and Validation of a Ductile Failure Model Against Aluminum Axial Torsion Experiments [Presentation]. https://www.osti.gov/biblio/1497469

Koripella, C.R., Lu, W., Yang, N., & Yang, N. (2014). Mechanical Behavior of Polycrystalline Bismuth Telluride Thermoelectric Elements [Presentation]. https://www.osti.gov/biblio/1497493

Song, B., Lu, W., & Lu, W. (2014). A New Experimental Technique to Characterize Micro-Diameter Copper Wires in Torsion. Experimental Mechanics. https://www.osti.gov/biblio/1140739

Lu, W., Jin, H., & Jin, H. (2014). An experimental study of ductile failure under Multi-Axial loading [Conference]. American Society of Mechanical Engineers Pressure Vessels and Piping Division Publication PVP. 10.1115/PVP2014-28336

Lu, W., Jin, H., & Jin, H. (2014). An experimental study of ductile failure under Multi-Axial loading [Presentation]. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. 10.1115/PVP2014-28336

Yang, N., Lu, W., Nishimoto, R.K., Koripella, C.R., & Koripella, C.R. (2013). Texture induced thermoelectric transport and mechanical properties of bismuth telluride thermoelectric compounds [Conference]. https://www.osti.gov/biblio/1122954

Haniff, S., Neilsen, M.K., Hinnerichs, T.D., Lu, W., & Lu, W. (2013). Confined Compression of Rigid Foams - Analysis [Conference]. https://www.osti.gov/biblio/1119747

Lu, W., Connelly, K., & Connelly, K. (2013). Confined Compression of Rigid Foams - Experiment [Conference]. https://www.osti.gov/biblio/1120222

Brown, A., Ohashi, Y., Lu, W., Nelson, S.M., Austin, K.N., Margolis, S.B., & Margolis, S.B. (2013). Modeling Interfacial Fracture in Sierra. 10.2172/1097203

Jin, H., Lu, W., & Lu, W. (2013). 3D deformation field throughout the interior of materials. 10.2172/1096458

Lu, W. (2013). Energy Dissipation and Frequency Analyses in Threaded Joints using Kolsksy Bar Techniques [Conference]. https://www.osti.gov/biblio/1115699

Chen, Q., Lu, W., & Lu, W. (2013). Studying Shear Dominated Ductile Behavior: Experimental and Computational Aspects [Presentation]. https://www.osti.gov/biblio/1661385

Jin, H., Lu, W., & Lu, W. (2013). Characterization of Microscale Damage Evolution using X-Ray Tomography [Conference]. https://www.osti.gov/biblio/1068462

Jin, H., Lu, W., & Lu, W. (2013). 3D-DIC for Studying Material Failure under Multiaxial Loading [Conference]. https://www.osti.gov/biblio/1115990

Song, B., Lu, W., & Lu, W. (2013). Energy Dissipation and Frequency Analyses in Threaded Joints using Kolsky Bar Techniques [Conference]. https://www.osti.gov/biblio/1067533

Lu, W., Gwinn, K.W., Song, B., & Song, B. (2013). Effects of Non-uniform Test Section on the Wave Propagation of Kolsky Bar [Conference]. https://www.osti.gov/biblio/1067748

Song, B., Lu, W., & Lu, W. (2013). Preloaded high-rate tension techniques [Conference]. Conference Proceedings of the Society for Experimental Mechanics Series. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84869744648&origin=inward

Lu, W., Song, B., Gwinn, K.W., & Gwinn, K.W. (2013). Dynamic fracture toughness test using Hopkinson bar [Conference]. Conference Proceedings of the Society for Experimental Mechanics Series. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84869777060&origin=inward

Song, B., Lu, W., & Lu, W. (2013). Preloaded high-rate tension techniques [Conference]. Conference Proceedings of the Society for Experimental Mechanics Series. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84869744648&origin=inward

Lu, W., Song, B., & Song, B. (2012). Experimental Characterizing Size Effects of Micro-Diameter Copper Wires [Conference]. https://www.osti.gov/biblio/1064234

Lu, W., Jin, H., & Jin, H. (2012). Ductility of Al Alloys under Various States of Stress Triaxiality [Conference]. https://www.osti.gov/biblio/1064239

Chen, Q., Lu, W., & Lu, W. (2012). On the Numerical Simulation of Ductile Failure in Shear Dominated Stress States Using a Modified Finite Deformation Gurson Model [Conference]. https://www.osti.gov/biblio/1072472

Chen, Q., Ostien, J.T., Lu, W., & Lu, W. (2012). Modified Gurson Model for Shear-Dominated Ductile Failure Simulation ? Numerical Integration V&V [Conference]. https://www.osti.gov/biblio/1062251

Jin, H., Lu, W., Mota, A., Foulk, J.W., & Foulk, J.W. (2012). Investigation of Microscale Damage Evolution in High-Strength Al Alloy [Conference]. https://www.osti.gov/biblio/1072668

Jin, H., Lu, W., Mota, A., Foulk, J.W., & Foulk, J.W. (2012). Investigation of Microscale Damage Evolution in High Strength A1 Alloy [Conference]. https://www.osti.gov/biblio/1072686

Jin, H., Lu, W., Mota, A., Foulk, J.W., Korellis, J.S., & Korellis, J.S. (2012). A Study of Void Evolution Mechanism in Aluminum using X-Ray Tomography. Proposed for publication in Experimental Mechanics.. https://www.osti.gov/biblio/1072567

Jin, H., Lu, W., Mota, A., Foulk, J.W., & Foulk, J.W. (2012). A Study of Void Evolution Mechanism in Aluminum Alloy using micro-XCT [Presentation]. https://www.osti.gov/biblio/1649961

Song, B., Lu, W., & Lu, W. (2012). Preloaded High-rate Tension Techniques [Conference]. https://www.osti.gov/biblio/1067667

Lu, W., Song, B., Gwinn, K.W., & Gwinn, K.W. (2012). Dynamic Fracture Toughness TestUsing Hopkinson Bar [Conference]. https://www.osti.gov/biblio/1064277

Jin, H., Lu, W., Mota, A., Foulk, J.W., & Foulk, J.W. (2012). Anisotropic Damage Evolution in Aluminum Alloy 7075-T7351 [Presentation]. https://www.osti.gov/biblio/1661405

Song, B., Lu, W., & Lu, W. (2012). Experimental Characterizing Size Effects of Micro-Diameter Copper Wires on Torsion Plasticity [Conference]. https://www.osti.gov/biblio/1145321

Phinney, L., Lu, W., Serrano, J.R., & Serrano, J.R. (2011). Raman and infrared thermometry for microsystems [Presentation]. ASME/JSME 2011 8th Thermal Engineering Joint Conference, AJTEC 2011. 10.1115/AJTEC2011-44097

Jin, H., Lu, W., Mota, A., Foulk, J.W., Yang, N., & Yang, N. (2011). Anisotropic Failure and Damage Evolution of A High Strength Aluminum Alloy [Conference]. https://www.osti.gov/biblio/1111626

Song, B., Lu, W., Jin, H., & Jin, H. (2011). Loading Rate Effect on Interlaminar Fracture of A Woven Glass Composite [Conference]. https://www.osti.gov/biblio/1118559

Lu, W., Song, B., Jin, H., & Jin, H. (2011). High Rate Fracture of Composite Materials [Presentation]. https://www.osti.gov/biblio/1732221

Song, B., Park, H., Lu, W., Chen, W., & Chen, W. (2011). Transverse impact response of a linear elastic ballistic fiber yarn. Journal of Applied Mechanics, Transactions ASME, 78(5). https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=80051869695&origin=inward

Jin, H., Lu, W., Mota, A., Foulk, J.W., Yang, N., & Yang, N. (2011). Study Damage Evolution in High Strength Aluminum using X-Ray Tomography [Conference]. https://www.osti.gov/biblio/1107685

Jin, H., Song, B., Lu, W., Antoun, B.R., & Antoun, B.R. (2011). Digital Image Correlation Technique for High-rate Mechanical Testing [Conference]. https://www.osti.gov/biblio/1107684

Lu, W., Song, B., Jin, H., & Jin, H. (2011). Dynamic Mode-II Characterization of A Woven Composite [Conference]. https://www.osti.gov/biblio/1107703

Jin, H., Lu, W., & Lu, W. (2011). Microscale Characterization of Granular Deformation near a Crack Tip. Journal of Materials Science, 46(20). https://doi.org/10.1007/s10853-011-5608-3

Jin, H., Lu, W., Mota, A., Foulk, J.W., Yang, N., Korellis, J.S., & Korellis, J.S. (2011). Study of Damage Evolution in High Strength Al Alloy using X-Ray Tomography [Conference]. https://www.osti.gov/biblio/1140953

Phinney, L., Lu, W., Serrano, J.R., & Serrano, J.R. (2011). Raman and infrared thermometry for microsystems [Conference]. https://www.osti.gov/biblio/1049490

Lu, W., Jin, H., & Jin, H. (2011). Dynamic Mode-II Characterization of a Woven Glass Composite [Conference]. https://www.osti.gov/biblio/1109178

Jin, H., Lu, W., & Lu, W. (2011). Dynamic Tensile Characterization of Foam Materials [Conference]. https://www.osti.gov/biblio/1109163

Jin, H., Lu, W., & Lu, W. (2011). Microscale Characterization of Plastic Deformation at the Crack Tip [Conference]. https://www.osti.gov/biblio/1109224

Lu, W. (2011). Mechanics of Materials Laboratory [Presentation]. https://www.osti.gov/biblio/1671735

Song, B., Antoun, B.R., Connelly, K., Korellis, J.S., Lu, W., & Lu, W. (2011). A newly developed Kolsky tension bar [Conference]. Conference Proceedings of the Society for Experimental Mechanics Series. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=80051816880&origin=inward

Song, B., Antoun, B.R., Connelly, K., Korellis, J.S., Lu, W., & Lu, W. (2011). Improved Kolsky tension bar for high-rate tensile characterization of materials. Measurement Science and Technology, 22(4). https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=79952758569&origin=inward

Jin, H., Lu, W., Mota, A., Foulk, J.W., Yang, N., & Yang, N. (2011). Voids Growth and Coalescence Study of Al 7075-T7351 using X-Ray Tomography [Conference]. https://www.osti.gov/biblio/1140701

Song, B., Jin, H., Lu, W., & Lu, W. (2011). Dynamic tensile characterization of foam materials [Presentation]. Conference Proceedings of the Society for Experimental Mechanics Series. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84857882825&origin=inward

Song, B., Lu, W., & Lu, W. (2010). Transverse Impact Response of DuPont Kevlar KM2 Fiber Yarn [Conference]. https://www.osti.gov/biblio/1671973

Phinney, L., Lu, W., Serrano, J.R., & Serrano, J.R. (2010). Raman and infrared thermometry for microsystems [Conference]. https://www.osti.gov/biblio/1281197

Song, B., Lu, W., & Lu, W. (2010). Dynamic response of fiber bundle under transverse impact [Conference]. Society for Experimental Mechanics - SEM Annual Conference and Exposition on Experimental and Applied Mechanics 2010. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=78049444463&origin=inward

Song, B., Lu, W., & Lu, W. (2010). High-speed transverse impact on a high performance ballistic fiber yarn [Conference]. https://www.osti.gov/biblio/1030240

Jin, H., Song, B., Lu, W., & Lu, W. (2010). Full-field characterization of dynamic fracture behavior of composite [Conference]. https://www.osti.gov/biblio/1030408

Foulk, J.W., Jin, H., Lu, W., Mota, A., & Mota, A. (2010). Quantifying the debonding of inclusions through tomography and computational homology. 10.2172/1008104

Song, B., Lu, W., & Lu, W. (2010). Impact Piezoelectric Response of PVDF. SENSORS AND ACTUATORS. https://www.osti.gov/biblio/1121959

Song, B., Jin, H., Lu, W., & Lu, W. (2010). Dynamic tensile characterization of foam materials [Conference]. https://www.osti.gov/biblio/1030223

Song, B., Jin, H., Lu, W., & Lu, W. (2010). Stress wave propagation in a composite beam subjected to transverse impact [Conference]. https://www.osti.gov/biblio/1030251

Song, B., Lu, W., & Lu, W. (2010). Dynamic response of fiber bundle under transverse impact [Conference]. https://www.osti.gov/biblio/1020445

Song, B., Antoun, B.R., Connelly, K., Korellis, J.S., Lu, W., & Lu, W. (2010). A newly developed Kolsky tension bar [Conference]. https://www.osti.gov/biblio/1020436

Jin, H., Lu, W., Yang, N., Korellis, J.S., & Korellis, J.S. (2010). Experimental study of failure mechanism in high strength aluminum [Conference]. https://www.osti.gov/biblio/1021606

Jin, H., Lu, W., & Lu, W. (2010). Grid method for microscale discontinuous deformation measurement. Experimental Mechanics. https://www.osti.gov/biblio/1124271

Jin, H., Lu, W., Korellis, J.S., & Korellis, J.S. (2010). Experimental study of voids in high strength aluminum alloys [Conference]. https://www.osti.gov/biblio/988518

Lu, W., Garcia, E.J., Jin, H., Song, B., & Song, B. (2010). Performance studies of a prototypical MEMS thermal actuator [Conference]. https://www.osti.gov/biblio/989973

Lu, W., Song, B., Jin, H., & Jin, H. (2010). A revisit to high-rate mode-II fracture characterization of composites with Kolsky bar techniques [Conference]. https://www.osti.gov/biblio/988976

Jin, H., Song, B., Lu, W., Connelly, K., & Connelly, K. (2010). Full-field characterization of dynamic fracture behavior of composite [Conference]. https://www.osti.gov/biblio/984171

Jin, H., Lu, W., Korellis, J.S., & Korellis, J.S. (2010). Investigation of the microscale damage evolution in high strength Al alloys [Conference]. https://www.osti.gov/biblio/984170

Lu, W., Song, B., Jin, H., & Jin, H. (2010). Dynamic mode II characterization using SHPB embedded with PVDF [Conference]. 7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84905493141&origin=inward

Lu, W., Song, B., Jin, H., & Jin, H. (2010). Dynamic mode-ii characterization using SHPB embedded with PVDF [Conference]. 7th Asian-Australasian Conference on Composite Materials 2010, ACCM 2010. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=84905504550&origin=inward

Goods, S.H., Lu, W., Keifer, P., & Keifer, P. (2009). Development and mechanical characterization of TufFoam [Conference]. https://www.osti.gov/biblio/1278588

Song, B., Connelly, K., Korellis, J.S., Lu, W., Antoun, B.R., & Antoun, B.R. (2009). A newly developed Kolsky bar [Conference]. https://www.osti.gov/biblio/950666

Jin, H., Lu, W., & Lu, W. (2009). Full-field investigation of mixed-mode fracture in polymer foam [Conference]. https://www.osti.gov/biblio/950665

Jin, H., Lu, W., & Lu, W. (2009). A nanoscale technique for characterizing recovery of inelastic deformation in shape memory alloy films. Proposed for publication in Applied Physics Letters.. https://www.osti.gov/biblio/962458

Hong, S., Jin, H., Lu, W., & Lu, W. (2008). Full-field characterization of tensile and fracture behavior of a rigid polyurethane foam using digital image correlation [Conference]. Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=57649229115&origin=inward

Lu, W., Antoun, B.R., Brown, A., Chen, W., Song, B., & Song, B. (2008). Interface delamination fracture toughness experiments at various loading rates [Conference]. Society for Experimental Mechanics - 11th International Congress and Exhibition on Experimental and Applied Mechanics 2008. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=57649210328&origin=inward

Foulk, J.W., Connelly, K., Song, B., Yang, N., Lu, W., & Lu, W. (2008). Size Effect in Continuum Modeling. 10.2172/1325213

Song, B., Lu, W., & Lu, W. (2008). The Effects of Strain Rate Density and Temperature on the Mechanical Properties of Polymethylene Diisocyanate (PMDI)-Based Rigid Polyurethane Foams during Compression. Journal of Materials Science. https://www.osti.gov/biblio/1143266

Brown, A., Lu, W., Margolis, S.B., Foulk, J.W., Bennett, T.E., Ohashi, Y., & Ohashi, Y. (2008). Mode-II Fracture - Simulations and Experiments [Conference]. https://www.osti.gov/biblio/1142940

Jin, H., Lu, W., Korellis, J.S., & Korellis, J.S. (2008). Study of Laser Welded Material using Laser Interferometry [Conference]. https://www.osti.gov/biblio/1143032

Jin, H., Lu, W., & Lu, W. (2008). Mechanical Characterization of Laser Welded Materials using Laser Interferometry [Conference]. https://www.osti.gov/biblio/1145829

Jin, H., Lu, W., Korellis, J.S., & Korellis, J.S. (2007). Microscale Deformation Measurement using DIC and SEM Imaging. The journal of strain analysis for engineering design. https://www.osti.gov/biblio/1146114

Lu, W., Antoun, B.R., Neilsen, M.K., & Neilsen, M.K. (2007). Strain Rate Dependence of Polyurethane Foam Materials [Conference]. https://www.osti.gov/biblio/1146385

Jin, H., Lu, W., Scheffel, S., Hinnerichs, T.D., Neilsen, M.K., & Neilsen, M.K. (2007). Full-field characterization of mechanical behavior of polyurethane foams. International Journal of Solids and Structures, 44(21), pp. 6930-6944. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=34548482929&origin=inward

Hinnerichs, T.D., Scherzinger, W.M., Neilsen, M.K., Carne, T.G., Lu, W., Stasiunas, E.C., & Stasiunas, E.C. (2007). Validation of a New Aluminum Honeycomb Crush Model with Dynamic Impact Tests [Conference]. https://www.osti.gov/biblio/1146572

Jin, H., Lu, W., Neilsen, M.K., Hinnerichs, T.D., Hong, S., & Hong, S. (2007). Full-field validation of polyurethane (PU) foams [Conference]. https://www.osti.gov/biblio/908697

Neilsen, M.K., Lu, W., Kraynik, A.M., Scherzinger, W.M., Hinnerichs, T.D., Jin, H., Bauer, S.J., Hong, S., & Hong, S. (2007). Constitutive Models for Polyurethane Foams [Conference]. https://www.osti.gov/biblio/1147881

Jin, H., Lu, W., Hong, S., Neilsen, M.K., Hinnerichs, T.D., & Hinnerichs, T.D. (2007). Fracture Behavior of Polyurethane Foams [Conference]. https://www.osti.gov/biblio/1147895

Neilsen, M.K., Lu, W., Kraynik, A.M., Scherzinger, W.M., & Scherzinger, W.M. (2007). Computational Exploration of Polyurethane Foam Yield and Failure Surfaces [Conference]. https://www.osti.gov/biblio/1147948

Jin, H., Lu, W., Antoun, B.R., Korellis, J.S., Chames, J.M., Yang, N., & Yang, N. (2007). Study of Ductile Fracture Behavior [Conference]. https://www.osti.gov/biblio/1141463

Hinnerichs, T.D., Scherzinger, W.M., Neilsen, M.K., Carne, T.G., Stasiunas, E.C., Lu, W., & Lu, W. (2007). Validation of a new aluminum honeycomb crush model with dynamic impact tests [Conference]. https://www.osti.gov/biblio/1268221

Jin, H., Lu, W., Hong, S., & Hong, S. (2007). Fracture Behavior of Polyurethane Foams [Conference]. https://www.osti.gov/biblio/1157544

Lo, C.S., Neilsen, M.K., Bateman, V.I., Carlson, L.W., Lu, W., Jin, H., Hinnerichs, T.D., & Hinnerichs, T.D. (2007). Validation of a Viscoplastic Model for Foam Response Over a Wide Temperature Range [Conference]. https://www.osti.gov/biblio/1268222

san Marchi, C., Lu, W., Brown, A., Yang, N., & Yang, N. (2007). Layered Ballistic Protection System [Presentation]. https://www.osti.gov/biblio/1724466

Neilsen, M.K., Lu, W., Hinnerichs, T.D., & Hinnerichs, T.D. (2006). A Viscoplastic Constitutive Model for Polyurthane Foams [Conference]. https://www.osti.gov/biblio/1266238

Hinnerichs, T.D., Pulling, E., Neilsen, M.K., Lu, W., & Lu, W. (2006). Validation of a New Aluminum Honeycomb Constitutive Model for Impact Analyses [Conference]. https://www.osti.gov/biblio/1266211

Lo, C.S., Neilsen, M.K., Bateman, V.I., Carlson, L.W., Lu, W., Jin, H., Hinnerichs, T.D., & Hinnerichs, T.D. (2006). Validation of a Viscoplastic Model for Foam Response Over a Wide Temperature Range [Conference]. https://www.osti.gov/biblio/1266207

Carne, T.G., Lu, W., Stasiunas, E.C., Neilsen, M.K., Scherzinger, W.M., Rogillio, B.R., Hinnerichs, T.D., & Hinnerichs, T.D. (2006). Characterization of aluminum honeycomb and experimentation for model development and validation :volume II, honeycomb experimentation for model development and validation. 10.2172/889957

Lu, W., Korellis, J.S., Lee, K.L., Scheffel, S., Hinnerichs, T.D., Neilsen, M.K., Scherzinger, W.M., & Scherzinger, W.M. (2006). Characterization of Aluminum Honeycomb and Experimentation for Model Development and Validation, Volume I: Discovery and Characterization Experiments for High-Density Aluminum Honeycomb. 10.2172/1323906

Pulling, E., Lu, W., Neilsen, M.K., & Neilsen, M.K. (2006). Validation of a New Aluminum Honeycomb Constitutive Model for Impact Analyses [Conference]. https://www.osti.gov/biblio/1266212

Lo, C.S., Neilsen, M.K., Bateman, V.I., Lu, W., Jin, H., & Jin, H. (2006). Validation of a Viscoplastic Model for Foam Encapsulated Component Response Over a Wide Temperature Range [Conference]. https://www.osti.gov/biblio/1266218

Neilsen, M.K., Lu, W., Olsson, W.A., Kraynik, A.M., Scherzinger, W.M., & Scherzinger, W.M. (2006). Foam Constitutive Models from Complementary Experiments and Cell-Level Simulations [Presentation]. https://www.osti.gov/biblio/1725955

Jin, H., Lu, W., & Lu, W. (2006). Strain measurement of microsamples using laser interferometry [Conference]. American Society of Mechanical Engineers, Applied Mechanics Division, AMD. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85196496533&origin=inward

Neilsen, M.K., Lu, W., Olsson, W.A., Kraynik, A.M., Scherzinger, W.M., & Scherzinger, W.M. (2005). Constitutive models for foams [Conference]. https://www.osti.gov/biblio/968181

Jin, H., Lu, W., Scheffel, S., & Scheffel, S. (2005). Characterization of Mechanical Behavior of Polyurethane Foams using Dic Technique [Conference]. https://www.osti.gov/biblio/1122346

Lu, W. (2005). Modeling and Experimentation of Viscous Damping for Structures Manufactured using the LIGA Technique [Conference]. https://www.osti.gov/biblio/1122601

Jin, H., Lu, W., Chames, J.M., Yang, N., & Yang, N. (2005). Texture Digital Image Correlation Technique in the Chracterization of LIGA Microsystems [Conference]. https://www.osti.gov/biblio/1122596

Griffiths, S.K., Lu, W., Hekmaty, M.A., McLean, D.E., Yang, C., Friedmann, T.A., Losey, M.W., Hachman, J.T., Skala, D.M., Hunter, L.L., Yang, N., Boehme, D.R., Korellis, J.S., Aigeldinger, G., & Aigeldinger, G. (2005). An aluminum resist substrate for microfabrication by LIGA. 10.2172/923166

Lu, W., Korellis, J.S., Lee, K.L., & Lee, K.L. (2005). Multiaxial crush of high-density aluminum honeycombs [Conference]. https://www.osti.gov/biblio/949026

Neilsen, M.K., Lu, W., Olsson, W.A., Kraynik, A.M., Scherzinger, W.M., & Scherzinger, W.M. (2005). Constitutive models for rigid polyurethane and removable epoxy foams [Conference]. https://www.osti.gov/biblio/948249

Neilsen, M.K., Lu, W., Olsson, W.A., Kraynik, A.M., Scherzinger, W.M., & Scherzinger, W.M. (2004). Constitutive models for rigid polyurethane and removable epoxy foams [Conference]. https://www.osti.gov/biblio/952111

Fang, H.E., Lu, W., & Lu, W. (2004). Effects of Sn-Pb solder microstructure on failure analysis. Proposed for publication in Journal of Electronic Packaging.. https://www.osti.gov/biblio/964165

Gwinn, K.W., Lu, W., Antoun, B.R., Metzinger, K.E., Korellis, J.S., & Korellis, J.S. (2004). Analytical impact models and experimental test validation for the Columbia shuttle wing leading edge panels [Conference]. https://www.osti.gov/biblio/948314

Lu, W., Field, R.V., Neilsen, M.K., Hinnerichs, T.D., & Hinnerichs, T.D. (2004). Validation of a nonlinear aluminum honeycomb constitutive model for impact analyses [Conference]. https://www.osti.gov/biblio/964121

Lu, W., Neilsen, M.K., & Neilsen, M.K. (2004). A new aluminum honeycomb constitutive model for impact analyses [Conference]. https://www.osti.gov/biblio/957689

Adolf, D.B., Lu, W., & Lu, W. (2000). Changes in the Nonlinear Viscoelasticity of Carbon Black Filled Rubber as it Ages. 10.2172/759301

Adolf, D.B., Chambers, R.S., Lu, W., & Lu, W. (2000). Predicting Chip Resistance with Computational Modeling. 10.2172/759302