Publications
Performing direct-field acoustic test environments on a sandia flight system to provide data for finite element simulation
Aero-acoustic loading has been established as the primary source of excitation for a Flight System at Sandia National Laboratories. However, flight data of this system does not exist, limiting estimations of system or component response in this environment. Therefore, an experimental acoustic simulation was performed on a heavily-instrumented Flight System, using the direct-field acoustic test (DFAT) method with a multi-input multi-output (MIMO) control system. The combination of DFAT and MIMO resulted in attaining uniform and gradient acoustic fields as high as 127 dB OASPL. This paper will discuss the design of the test, the speaker and controller configurations, and the test results of this unique test method. Additionally, an overview of the method used to apply the measured test data to the pressure-loading finite element simulations of the Flight System will be discussed as well.