Publications
Flight environments demonstrator: Part III—sensitivity of expansion to model accuracy
The ability to extrapolate response data to unmeasured locations has obvious benefits for a range of lab and field experiments. This is typically done using an expansion process utilizing some type of transformation matrix, which typically comes from mode shapes of a finite element model. While methods exist to perform expansion, it is still not commonplace, perhaps due to a lack of experience using expansion tools or a lack of understanding of the sensitivities of the problem setup on results. To assess the applicability of expansion in a variety of real-world test scenarios, it is necessary to determine the level of perturbation or error the finite element model can sustain while maintaining accuracy in the expanded results. To this end, the structure model’s boundary conditions, joint stiffness, and material properties were altered to determine the range of discrepancies allowable before the expanded results differed significantly from the measurements. The effect of improper implementations of the expansion procedure on accuracy is also explored. This study allows for better insights on prospective use cases and possible pitfalls when implementing the expansion procedure.