Publications

Two bulkheads, one composed of high performance concrete and the other of highly compacted sand-bentonite material, have been constructed in a tunnel in unfractured granite rock at the Underground Research Laboratory. The Tunnel Sealing Experiment will characterize the performance of the two bulkheads under applied hydraulic pressures. The chamber between the two bulkheads will be pressurized to approximately 4 MPa, a value representative of the ambient pore pressures in the rock at a depth of 420 m. Instrumentation in the experiment monitors the seepage through and around each bulkhead as well as the changes tot he pure water pressure, and hence changes to the flow directions,in the intact rock. Stresses and displacements in each bulkhead are also monitored. The objective of the experiment is to demonstrate technologies for contrustion of bentonite and concrete bulkheads and to quantify the performance of each bulkhead.

Sealing a nuclear waste repository in partially saturated tuff presents unique challenges to assuring performance of sealing components. Design and performance of components for sealing shafts, ramps, drifts, and exploratory boreholes depend on specific features of both the repository design and the site; of particular importance is the hydrologic environment in the unsaturated zone, including the role of fracture flow. Repository design features important to sealing of a repository include the size and location of shaft and ramp accesses, excavation methods, and the underground layout features such as grade (drainage direction) and location relative to geologic structure. Uncertainties about seal components relate to the postclosure environment for the seals, the emplacement methods, the material properties, and the potential performance of the components. An approach has been developed to reduce uncertainties and to increase confidence in seal performance; it includes gathering extensive site characterization data, establishing conservative design requirements, testing seal components in laboratory and field environments, and refining designs of both the seals and the repository before seals are installed. 9 refs., 5 figs., 2 tabs.