Publications

Bendure, A. (1996). Integrated environmental, health and safety management; The outcome of the `Necessary and Sufficient Process` [Conference]. https://doi.org/10.2172/230622

Guidotti, R.A. (1996). Potential power sources for high-temperature geothermal applications [Conference]. https://www.osti.gov/biblio/230623

Callahan, G.D., Loken, M.C., Hurtado, L.D., Hansen, F.D., & Hansen, F.D. (1996). Evaluation of constitutive models for crushed salt [Conference]. https://www.osti.gov/biblio/230624

Manginell, R.P., Smith, J.H., Ricco, A.J., Moreno, D.J., Hughes, R.C., Huber, R.J., Senturia, S.D., & Senturia, S.D. (1996). Selective, pulsed CVD of platinum on microfilament gas sensors [Conference]. https://www.osti.gov/biblio/231188

Bickes, R.W., Guidotti, R.A., McCampbell, C.B., & McCampbell, C.B. (1996). Characterization of semiconductor bridges (SCB) igniters for use in thermal batteries [Conference]. https://www.osti.gov/biblio/231189

Nasby, R.D. (1996). Application of chemical-mechanical polishing to planarization of surface-micromachined devises [Conference]. https://www.osti.gov/biblio/231192

Hoffman, E.L. (1996). Three dimensional finite element simulations of room and pillar mines in rock salt [Conference]. https://www.osti.gov/biblio/231208

Hansen, F.D. (1996). Large-scale dynamic compaction of natural salt [Conference]. https://www.osti.gov/biblio/231209

Rogers, J.D. (1996). Issues in workforce composition analysis [Conference]. https://www.osti.gov/biblio/231211

Fossum, A.F. (1996). Constitutive basis of the MDCF model for rock salt [Conference]. https://www.osti.gov/biblio/231226

Guidotti, R.A. (1996). Screening study of mixed transition-metal oxides for use as cathodes in thermal batteries [Conference]. https://www.osti.gov/biblio/231227

Matalucci, R.V. (1996). Phase 2 report on the evaluation of polyacrylonitrile (PAN) as a binding polymer for absorbers used to treat liquid radioactive wastes. https://doi.org/10.2172/231361

Rouse, M.J. (1996). Lessons-learned from the document production system redevelopment (DPS/R). https://doi.org/10.2172/231536

Zolper, J.C. (1996). Effect of hydrogen on Ca and Mg acceptors in GaN [Conference]. https://doi.org/10.2172/231543

Zolper, J.C. (1996). Ion implantation in compound semiconductors for high-performance electronic devices [Conference]. https://doi.org/10.2172/231550

Phillips, M.L.F. (1996). Garnet phosphors prepared via hydrothermal synthesis [Conference]. https://doi.org/10.2172/231670

Keicher, D. (1996). Laser Engineered Net Shaping (LENS{trademark}) for additive component processing [Conference]. https://www.osti.gov/biblio/231692

Biefeld, R.M. (1996). The growth and doping of Al(As)Sb by metal-organic chemical vapor deposition [Conference]. https://doi.org/10.2172/231696

Fate, R.E. (1996). Application of a NAPL partitioning interwell tracer test (PITT) to support DNAPL remediation at the Sandia National Laboratories/New Mexico chemical waste landfill [Conference]. https://www.osti.gov/biblio/231938

Miller, L.A., Edwards, J., Rose, S., & Rose, S. (1996). Accelerator production of tritium authorization basis strategy [Conference]. https://www.osti.gov/biblio/231963

McCulloch, W.H. (1996). Nuclear source term evaluation for launch accident environments [Conference]. https://www.osti.gov/biblio/231964

Phipps, G.S. (1996). Multi-Spectral Pushbroom Imaging Radiometer (MPIR) for remote sensing studies [Conference]. https://www.osti.gov/biblio/233291

Guidotti, R.A. (1996). The effects of silicon doping on the performance of PMAN carbon anodes in Li-ion cells [Conference]. https://doi.org/10.2172/486069

Hoier, S., Schlaikjer, C., Johnson, A., Riley, S., & Riley, S. (1996). Capacity loss and faradaic efficiency of lithium thionyl chloride cells [Conference]. https://doi.org/10.2172/219339

Gartling, D.K. (1996). TORO II: A finite element computer program for nonlinear quasi-static problems in electromagnetics: Part 1, Theoretical background. https://doi.org/10.2172/237142

Gartling, D.K. (1996). TORO II: A finite element computer program for nonlinear quasi-static problems in electromagnetics: Part 2, User`s manual. https://doi.org/10.2172/237143

Shadid, J.N. (1996). MP Salsa: a finite element computer program for reacting flow problems. Part 1--theoretical development. https://doi.org/10.2172/237399

Guidotti, R.A. (1996). Re-evaluation of the eutectic region of the LiBr-KBr-LiF system [Conference]. https://doi.org/10.2172/238472

Fredrich, J. (1996). Two-dimensional nonlinear finite element analysis of well damage due to reservoir compaction, well-to-well interactions, and localization on weak layers [Conference]. https://www.osti.gov/biblio/238473

Dugger, M.T. (1996). Oxidation and frictional performance of solid lubricants used in weapon stronglinks [Conference]. https://doi.org/10.2172/238550

de Boer, M.P. (1996). Mechanics of interfacial crack propagation in microscratching [Conference]. https://www.osti.gov/biblio/238551

Webb, S.W. (1996). Gas-phase diffusion in porous media: Evaluation of an advective- dispersive formulation and the dusty-gas model including comparison to data for binary mixtures. https://doi.org/10.2172/242787

Ho, C.K. (1996). A review of porous media enhanced vapor-phase diffusion mechanisms, models, and data: Does enhanced vapor-phase diffusion exist?. https://doi.org/10.2172/242788

Foutz, W.L., McCord, J.P., & McCord, J.P. (1996). Summary of South Fence Road phase II 1993 field operations at Site SFR-4. https://doi.org/10.2172/244418

Foutz, W.L., McCord, J.P., & McCord, J.P. (1996). Summary of South Fence Road phase II 1993 field operations at site SFR-3. https://doi.org/10.2172/244447

Schuhen, M.D. (1996). Sandia WIPP calibration traceability. https://doi.org/10.2172/245617

Vigil, M. (1996). Plane shock generator explosive lens. https://doi.org/10.2172/245662

Gustwiller, K.D. (1996). Telecommunications administration standard. https://doi.org/10.2172/249227

Draelos, T.J. (1996). Authentication of data for monitoring a comprehensive test ban treaty. https://doi.org/10.2172/249279

Chanin, D.I., Murfin, W.B., & Murfin, W.B. (1996). Site restoration: Estimation of attributable costs from plutonium-dispersal accidents. https://doi.org/10.2172/249283

Butler, M.A. (1996). Fiber optic hydrogen sensor. https://doi.org/10.2172/251330

Redmond, J.M. (1996). Surface waviness resulting from single point diamond dressing in cylindrical grinding [Conference]. https://doi.org/10.2172/251353

Spencer, C.R. (1996). Procurement Organization, Sandia National Laboratories. Annual report, fiscal year 1995. https://doi.org/10.2172/256786

Silver, R. (1996). Integrated Safety, Environmental and Emergency Management System (ISEEMS) [Conference]. https://www.osti.gov/biblio/257383

Lott, S.E. (1996). Analysis of Strategic Petroleum Reserve bubble point pressure data. https://doi.org/10.2172/259193

Pettit, R.B. (1996). Process measurement assurance program. https://doi.org/10.2172/263007

Pacheco, J.E. (1996). Testing of an impedance heating system for solar power tower applications [Conference]. https://www.osti.gov/biblio/266352

Prairie, M.R. (1996). Solar central receiver technology: the Solar Two Project [Conference]. https://www.osti.gov/biblio/266361

Lange, C.H. (1996). Probabilistic fatigue methodology and wind turbine reliability. https://doi.org/10.2172/266874

Nakos, J.T. (1996). An investigation of temperature measurement methods in nuclear power plant reactor pressure vessel annealing. https://doi.org/10.2172/274130

Emin, D.J. (1996). Breakdown of the resistor-network model for steady-state hopping conduction [Conference]. https://www.osti.gov/biblio/274164

Weiss, D.R. (1996). Smart Gun Technology project. Final report. https://doi.org/10.2172/285510

Trauth, K.M. (1996). Estimates of the solubilities of waste element radionuclides in waste isolation pilot plant brines: A report by the expert panel on the source term. https://doi.org/10.2172/373829

Winter, V.L. (1996). Proving refinement transformations for deriving high-assurance software [Conference]. https://www.osti.gov/biblio/373939

Gruda, J.D. (1996). Crashworthiness of the AT-400A shipping container [Conference]. https://doi.org/10.2172/392748

Dwyer, B.P. (1996). Demonstration of close-coupled barriers for subsurface containment of buried waste. https://doi.org/10.2172/505265

Robinson, D.G. (1996). On-Board Diagnostics II: Subsystem analysis. Interim report, March 1996. https://doi.org/10.2172/10129718

Loubriel, G.M. (1996). Diamond switches for high temperature electronics [Conference]. https://www.osti.gov/biblio/233381

Lear, K.L. (1996). Life-testing oxide confined VCSELs: Too good to last? [Conference]. Proceedings of SPIE - The International Society for Optical Engineering. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0001607855&origin=inward

Hadley, G.R. (1996). Comprehensive numerical modeling of vertical-cavity surface-emitting lasers [Conference]. IEEE Journal of Quantum Electronics. https://doi.org/10.2172/28383

Lopez, E. (1996). Materials compatibility issues associated with aqueous alkaline cleaners [Conference]. https://www.osti.gov/biblio/212491

Nigrey, P.J. (1996). Compatibility of packaging components with simulant mixed waste [Conference]. https://doi.org/10.2172/212531

Sackos, J.T. (1996). The emerging versatility of a scannerless range imager [Conference]. https://www.osti.gov/biblio/212558

Shul, R.J. (1996). Properties of H, O and C in GaN [Conference]. https://www.osti.gov/biblio/212559

Shul, R.J. (1996). Plasma chemistries for dry etching GaN, AlN, InGaN and InAlN [Conference]. https://doi.org/10.2172/212561

Kokas, J., Desantis, C., Wenger, G., & Wenger, G. (1996). NCMS PWB Surface Finishes Team project summary [Conference]. https://www.osti.gov/biblio/212562

Vahle, M.O. (1996). Sandia`s network for supercomputing `95: Validating the progress of Asynchronous Transfer Mode (ATM) switching. https://doi.org/10.2172/212702

Ratner, J.A. (1996). Collaborating with human factors when designing an electronic textbook [Conference]. https://www.osti.gov/biblio/216305

Little, C.Q. (1996). Rapid world modelling for robotics [Conference]. https://www.osti.gov/biblio/217840

Hoier, S.N., Eisenmann, E.T., & Eisenmann, E.T. (1996). The faradaic efficiency of the lithium-thionyl chloride battery. https://doi.org/10.2172/219339

Cernosek, R.W. (1996). Lubricant monitoring using quartz resonator sensors [Conference]. https://doi.org/10.2172/219453

Winter, V.L. (1996). Proving refinement transformations using extended denotational semantics [Conference]. https://www.osti.gov/biblio/219543

Braithwaite, J. (1996). Sodium/sulfur battery engineering for stationary energy storage. Final report. https://doi.org/10.2172/227666

Rodacy, P.J. (1996). Destruction of explosives in groundwater and process water using photocatalytic and biological methods. https://doi.org/10.2172/227683

Zawadzkas, G.A. (1996). Environmental assessment for operations, upgrades, and modifications in SNL/NM Technical Area IV. https://doi.org/10.2172/228488

Ringler, C.E. (1996). Evaluation of intrusion sensors and video assessment in areas of restricted passage. https://doi.org/10.2172/228519

Bouchier, F., Ahrens, J.S., Wells, G., & Wells, G. (1996). Laboratory evaluation of the IriScan prototype biometric identifier. https://doi.org/10.2172/230373

Keicher, D. (1996). Lens designs for high irradiance application of multi-kilowatt Nd:YAG welding lasers [Conference]. https://www.osti.gov/biblio/230607

Cahoon, R.M. (1996). High performance storage system at Sandia National Labs [Conference]. https://www.osti.gov/biblio/231222

Fredrich, J. (1996). Petrographic and X-ray diffraction analyses of selected samples from Marker Bed 139 at the Waste Isolation Pilot Plant. https://doi.org/10.2172/231362

Webb, S.W. (1996). Effect of explicit representation of detailed stratigraphy on brine and gas flow at the Waste Isolation Pilot Plant. https://doi.org/10.2172/231365

Schlienger, M.E. (1996). Radioactive scrap metal decontamination technology assessment report. https://doi.org/10.2172/231366

Helton, J.C., Anderson, D.R., Baker, B.L., & Baker, B.L. (1996). Computational implementation of a systems prioritization methodology for the Waste Isolation Pilot Plant: A preliminary example. https://doi.org/10.2172/231367

Strong, W.R. (1996). Preliminary data from an instantaneous profile test conducted near the Mixed Waste Landfill, Technical Area 3, Sandia National Laboratories/New Mexico. https://doi.org/10.2172/231430

Thompson, G. (1996). Adaptive Sampling approach to environmental site characterization at Joliet Army Ammunition Plant: Phase 2 demonstration. https://doi.org/10.2172/231450

Tucker, M.D. (1996). Recommendations for computer modeling codes to support the UMTRA groundwater restoration project. https://doi.org/10.2172/231451

Koehler, D.R. (1996). Ultraminiature resonator accelerometer. https://doi.org/10.2172/231652

Wyss, G. (1996). A user`s guide to SABLE 2.0: The Sandia Automated Boolean Logic Evaluation software. https://doi.org/10.2172/231653

Neilsen, M.K. (1996). A viscoplastic theory for braze alloys. https://doi.org/10.2172/233338

Coltrin, M.E. (1996). Simplified models of growth, defect formation, and thermal conductivity in diamond chemical vapor deposition. https://doi.org/10.2172/233352

Levin, V. (1996). Identifying industrial best practices for the waste minimization of low-level radioactive materials. https://doi.org/10.2172/236988

Feddema, J.T. (1996). Modeling, system identification, and control for slosh-free motion of an open container of liquid. https://doi.org/10.2172/238486

Adkins, C.L.J. (1996). Ceramic powder synthesis in supercritical fluids. https://doi.org/10.2172/239278

Hurley, M.R. (1996). Guide to preparing SAND reports. Revised. https://doi.org/10.2172/242700

Rey, D. (1996). Development of Green Box sensor module technologies for rail applications. https://doi.org/10.2172/242786

Tenney, J.L. (1996). Sandia Airspace Recording System (SARS) software reference manual. https://doi.org/10.2172/244438

Locke, T. (1996). Inside Sandia, April 1996 [Presentation]. https://doi.org/10.2172/257318

Hurd, A.J. (1996). Materials and processes research and the information highway [Presentation]. https://www.osti.gov/biblio/267475

Sylwester, A.P. (1996). Potential VNIITF capabilities on the area of SOFC power generation. https://www.osti.gov/biblio/269321

Doughty, D. (1996). Materials issues in lithium ion rechargeable battery technology [Conference]. SAMPE Journal. https://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=0030103538&origin=inward