Publications

Fitzpatrick-Fletcher, S.K. (1997). The software engineering journey: From a naieve past into a responsible future [Conference]. https://www.osti.gov/biblio/513536

Creel, E.E. (1997). A summary of the GPS system performance for STARS Mission 3 [Conference]. https://www.osti.gov/biblio/513537

Shepherd, E.R., Keyser, R.G., Armstrong, H.M., & Armstrong, H.M. (1997). The data dictionary: A view into the CTBT knowledge base [Conference]. https://www.osti.gov/biblio/513546

Young, C.J. (1997). Testing the waveform correlation event detection system: Teleseismic, regional, and local distances [Conference]. https://www.osti.gov/biblio/513547

Beiriger, J. (1997). Software design and operational model for the WCEDS prototype [Conference]. https://www.osti.gov/biblio/513548

Martin, S.J. (1997). Magnetically-excited flexural plate wave resonator [Conference]. https://www.osti.gov/biblio/515585

Robino, C.V. (1997). Solidification modeling of Nb bearing superalloys [Conference]. https://doi.org/10.2172/515586

Deland, S.M. (1997). Data analysis for remote monitoring of safeguarded facilities [Conference]. https://www.osti.gov/biblio/515588

McClure, J.D. (1997). Low-level radioactive waste transportation safety history [Conference]. https://www.osti.gov/biblio/515589

Furnish, M.D. (1997). Alumina strength degradation in the elastic regime [Conference]. https://doi.org/10.2172/515594

Konrad, C.H., Trott, W.M., Hall, C.A., & Hall, C.A. (1997). Use of z-pinch sources for high-pressure shock wave experiments [Conference]. https://www.osti.gov/biblio/515595

Stygar, W.A. (1997). D-dot and B-dot monitors for Z-vacuum-section power-flow measurements [Conference]. https://www.osti.gov/biblio/515597

Stygar, W.A. (1997). Design and performance of the Z magnetically-insulated transmission lines [Conference]. https://www.osti.gov/biblio/515598

Griffin, P.J. (1997). Application of reactors for testing neutron-induced upsets in commercial SRAMs [Conference]. https://doi.org/10.2172/515621

Frear, D.R. (1997). Areal array jetting device for ball grid arrays [Conference]. https://www.osti.gov/biblio/515650

Zich, J.L. (1997). Application & testing of high temperature materials for solenoid coils [Conference]. https://www.osti.gov/biblio/516013

Dohner, J.L. (1997). Active chatter control in a milling machine [Conference]. https://www.osti.gov/biblio/516015

McHugo, S.A., Flink, C., Weber, E.R., & Weber, E.R. (1997). Copper in silicon: Quantitative analysis of internal and proximity gettering [Conference]. https://www.osti.gov/biblio/516049

Craft, R. (1997). A key management concept for the CTBT International Monitoring System [Conference]. https://www.osti.gov/biblio/516976

Holswade, S.C. (1997). Optical measurement of micromachine engine performance [Conference]. https://www.osti.gov/biblio/519118

Clews, P.J. (1997). Minimizing sulfur contamination and rinse water volume required following a sulfuric acid/hydrogen peroxide clean by performing a chemically basic rinse [Conference]. https://www.osti.gov/biblio/519142

Lewis, C. (1997). Intelligent tools and process development for robotic edge finishing: LDRD project final report. https://doi.org/10.2172/520733

Manginell, R.P., Smith, J.H., Ricco, A.J., Hughes, R.C., Moreno, D.J., Huber, R.J., & Huber, R.J. (1997). Electro-thermal modeling of a microbridge gas sensor [Conference]. https://www.osti.gov/biblio/522245

Senft, D.C., Dugger, M.T., & Dugger, M.T. (1997). Friction and wear in surface micromachined tribological test devices [Conference]. https://www.osti.gov/biblio/522252

Butcher, B.M. (1997). A summary of the sources of input parameter values for the Waste Isolation Pilot Plant final porosity surface calculations. https://doi.org/10.2172/522732

Wright, S.A. (1997). Potts-model grain growth simulations: Parallel algorithms and applications. https://doi.org/10.2172/522745

Edenburn, M.W. (1997). Electric utility capacity expansion and energy production models for energy policy analysis. https://doi.org/10.2172/522766

Warren, S. (1997). The role of technology in reducing health care costs. Final project report. https://doi.org/10.2172/525003

Phelan, J.M. (1997). Design, demonstration and evaluation of a thermal enhanced vapor extraction system. https://doi.org/10.2172/525056

Holt, R.M. (1997). Conceptual model for transport processes in the Culebra Dolomite Member, Rustler Formation. https://doi.org/10.2172/527459

Williams, C.V. (1997). Final report of the environmental measurement-while-drilling-gamma ray spectrometer system technology demonstration at the Savannah River Site F-Area Retention Basin. https://doi.org/10.2172/527461

Saunders, R.S. (1997). Engineered monodisperse mesoporous materials. https://doi.org/10.2172/527462

Holm, E.A. (1997). Abnormal grain growth -- The origin of recrystallization nuclei? [Conference]. https://doi.org/10.2172/527513

Aeschliman, D.P. (1997). Coherent structures in compressible free-shear-layer flows. https://doi.org/10.2172/527559

Taylor, P.A. (1997). A multi-level code for metallurgical effects in metal-forming processes. https://doi.org/10.2172/527560

Gourley, P.L. (1997). Final report on LDRD project: Semiconductor surface-emitting microcavity laser spectroscopy for analysis of biological cells and microstructures. https://doi.org/10.2172/527562

Xavier, P.G. (1997). Coordinating robot motion, sensing, and control in plans. LDRD project final report. https://doi.org/10.2172/527563

Warpinski, N.R. (1997). Microseismic and deformation imaging of hydraulic fracture growth and geometry in the C sand interval, GRI/DOE M-Site project [Conference]. https://www.osti.gov/biblio/527905

Kleban, S. (1997). SmartWeld working session for the GTS4. https://doi.org/10.2172/531077

Gauntt, R.O. (1997). Final results of the XR2-1 BWR metallic melt relocation experiment. https://doi.org/10.2172/531083

Parmeter, J. (1997). Development of a portable preconcentrator/ion mobility spectrometer system for the trace detection of narcotics. https://doi.org/10.2172/531118

Griesmeyer, J. (1997). Final report: An enabling architecture for information driven manufacturing. https://doi.org/10.2172/532523

Ames, A. (1997). Analysis driven mechanical redesign. https://doi.org/10.2172/532604

Chen, P. (1997). Final report for LDRD project learning efficient hypermedia navigation. https://doi.org/10.2172/532659

Hansen, F.D. (1997). Description and evaluation of a mechanistically based conceptual model for spall. https://doi.org/10.2172/532678

Fink, C.H. (1997). 1996 Site environmental report Sandia National Laboratories Albuquerque, New Mexico. https://doi.org/10.2172/532681

Bauer, S.J. (1997). Analysis of subsidence data for the West Hackberry site, Louisiana. https://doi.org/10.2172/532686

Culp, T.A. (1997). 1996 Site environmental report Tonopah test range Tonopah, Nevada. https://doi.org/10.2172/534486

Vernon, M.E. (1997). Hot Cell Facility modifications at Sandia National Laboratories to support {sup 99}Mo production [Conference]. https://www.osti.gov/biblio/537248

Coats, R. (1997). Production of fission and activation product isotopes at Sandia National Laboratories [Conference]. https://www.osti.gov/biblio/537249

Caffey, T. (1997). Elements of a continuous-wave borehole radar. Final report. https://doi.org/10.2172/537258

Berg, R.S. (1997). A method for establishing integrity in software-based systems [Conference]. https://www.osti.gov/biblio/537368

Peterson, D. (1997). Validating theoretical calculations of thermomechanical stress and deformation using the ATC4.1 flip-chip test vehicle [Conference]. https://www.osti.gov/biblio/549667

Butcher, B.M. (1997). Waste isolation pilot plant disposal room model. https://doi.org/10.2172/552781

Glass, S.J. (1997). Mo-Al{sub 2}O{sub 3} cermet research and development. https://doi.org/10.2172/552782

Resnick, P. (1997). Evaluation of post-ashed photoresist cleaning using oxidizing chemistries [Conference]. https://www.osti.gov/biblio/563165

Arvizu, D.E. (1997). Emerging critical issues and technology needs. https://www.osti.gov/biblio/570076

Malone, T.P. (1997). VNIIEF NMPC and A Maintenance Management Conference -- video surveillance [Conference]. https://www.osti.gov/biblio/634045

Haaland, D.M. (1997). Attenuated total reflection of dielectric/metal interfaces [Conference]. https://www.osti.gov/biblio/636041

Sarfaty, R.A. (1997). Final report for the virtual channel encryptor laboratory directed research and development project. https://doi.org/10.2172/667651

Ullrich, R.A. (1997). Sandia National Laboratories: A History of Exceptional Service in the National Interest. https://doi.org/10.2172/1876899

Wyss, G. (1997). A mathematical foundation for the development of cut sets for arbitrarily interconnected networks. https://www.osti.gov/biblio/10110289

Keyser, R.G. (1997). The browser prototype for the CTBT knowledge base [Conference]. https://www.osti.gov/biblio/513513

Sholander, P.E. (1997). The effects of user mobility on usage parameter control (UPC) in wireless ATM systems [Conference]. https://www.osti.gov/biblio/292840

Sinclair, M.B. (1997). Final report: Photochromism as a switching mechanism for electronically active organic materials. https://doi.org/10.2172/505264

Kessel, D. (1997). Geotechnical characterization for the Main Drift of the Exploratory Studies Facility. https://doi.org/10.2172/505271

Fryar, D.G., Beach, J.A., Kelley, V.A., Knowles, M.K., & Knowles, M.K. (1997). Long-term brine migration through an engineered shaft seal system [Conference]. https://www.osti.gov/biblio/505283

Ricco, A.J. (1997). Chemical class specificity using self-assembled monolayers on SAW devices: Effects of adsorption time and substrate grain size [Conference]. https://www.osti.gov/biblio/505290

Loken, M., Statham, W., & Statham, W. (1997). Calculation of density and permeability of compacted crushed salt within an engineered shaft sealing system [Conference]. https://doi.org/10.2172/505294

Christian-Frear, T. (1997). A method of modeling time-dependent rock damage surrounding underground excavations in multiphase groundwater flow [Conference]. https://www.osti.gov/biblio/505295

Tidwell, V.C. (1997). A comparison of simple upscaling models with multisupport permeability data measured on a block of Berea Sandstone [Conference]. https://www.osti.gov/biblio/505751

Engi, D. (1997). Understanding the dynamics of water availability and use in China. https://doi.org/10.2172/508107

Platzbecker, M. (1997). Seafloor earthquake measurement system, SEMS IV. https://doi.org/10.2172/508137

Stone, C.M. (1997). SANTOS - a two-dimensional finite element program for the quasistatic, large deformation, inelastic response of solids. https://doi.org/10.2172/508138

Gillen, K.T. (1997). Nuclear power plant accident simulations of gasket materials under simultaneous radiation plus thermal plus mechanical stress conditions. https://doi.org/10.2172/508139

Mills, G.S. (1997). Packaging performance evaluation and performance oriented packaging standards for large packages for poison inhalation hazard materials. https://doi.org/10.2172/508140

Shrouf, R.D. (1997). Gas flow characterization of restrictive flow orifice devices. https://doi.org/10.2172/510304

Turman, B.N. (1997). High energy electron beam joining of ceramic components [Conference]. https://doi.org/10.2172/554875

Shaneyfelt, M.R. (1997). Impact of aging on radiation hardness [Conference]. https://www.osti.gov/biblio/513507

Spielman, R. (1997). Design validation of the PBFA-Z vacuum insulator stack [Conference]. https://www.osti.gov/biblio/513562

Schmale, D.T. (1997). Description of a micro-mechanical testing system. https://doi.org/10.2172/515567

Roach, D.P. (1997). Development program to certify composite doubler repair technique for commercial aircraft [Conference]. https://www.osti.gov/biblio/516014

Shurtleff, W.W. (1997). Validation and transfer of NDI techniques for corrosion quantification and small crack/disbond detection [Conference]. https://www.osti.gov/biblio/516038

Sweet, J.N. (1997). High reliability plastic packaging for microelectronics. https://doi.org/10.2172/520618

Lipinski, R. (1997). Conceptual design for an electron-beam heated hypersonic wind tunnel. https://doi.org/10.2172/522724

Glowka, D.A. (1997). The role of R and D in geothermal drilling cost reduction [Conference]. https://www.osti.gov/biblio/527430

McDonald, M.J. (1997). Food and Drug Administration process validation activities to support 99Mo production at Sandia National Laboratories [Conference]. https://www.osti.gov/biblio/537292

York, A.R. (1997). Development of modifications to the material point method for the simulation of thin membranes, compressible fluids, and their interactions. https://doi.org/10.2172/537397

Frear, D.R. (1997). Constitutive behavior of 40Sn-40In-20Pb and 50In-50Pb solders. https://www.osti.gov/biblio/548765

Dobranich, D. (1997). The Fireball integrated code package. https://doi.org/10.2172/552765

Martinez, M. (1997). LDRD final report: Physical simulation of nonisothermal multiphase multicomponent flow in porous media. https://doi.org/10.2172/552791

Ricco, A.J. (1997). Interactions between self-assembled monolayers and an organophosphonate: A detailed study using surface acoustic wave-based mass analysis, polarization modulation-FTIR spectroscopy, and ellipsometry [Conference]. https://www.osti.gov/biblio/542066

Murata, K.K. (1997). Development and assessment of the CONTAIN hybrid flow solver [Conference]. https://www.osti.gov/biblio/537369

Tautges, T.J. (1997). Generation of multi-million element meshes for solid model-based geometries: The Dicer algorithm [Conference]. https://www.osti.gov/biblio/292849

Tautges, T.J. (1997). Feature recognition applications in mesh generation [Conference]. https://www.osti.gov/biblio/292850

Ammerman, D.J. (1997). Regulatory and extra-regulatory testing to demonstrate radioactive material packaging safety [Conference]. https://www.osti.gov/biblio/481842

Sweeney, M.A. (1997). How to manage without being a manager [Conference]. https://www.osti.gov/biblio/481844

Christian-Frear, T.L. (1997). Examples of technical innovations in rock property measurements prompted by the Waste Isolation Pilot Plant [Conference]. https://www.osti.gov/biblio/481892

Dupree, S.A. (1997). Results of the joint ESARDA/INMM workshop on science and modern technology for safeguards [Conference]. https://www.osti.gov/biblio/481915

Loubriel, G.M. (1997). Diamond switches for high temperature electronics [Conference]. https://www.osti.gov/biblio/481917