Publications

59 Results
Skip to search filters

Investigating growth to detonation in vapor-deposited hexanitrostilbene and pentaerythritol tetranitrate films using high-throughput methods

Journal of Applied Physics

Knepper, Robert; Rupper, Stephen G.; DeJong, Stephanie D.; Marquez, Michael P.; Kittell, David E.; Schmitt, Randal L.; Tappan, Alexander S.

In this work, a high-throughput experimental setup was used to characterize initiation threshold and growth to detonation in the explosives hexanitrostilbene (HNS) and pentaerythritol tetranitrate (PETN). The experiment sequentially launched an array of laser-driven flyers to shock samples arranged in a 96-well microplate geometry, with photonic Doppler velocimetry diagnostics to characterize flyer velocity and particle velocity at the explosive–substrate interface. Vapor-deposited films of HNS and PETN were used to provide numerous samples with various thicknesses, enabling characterization of the evolution of growth to detonation. One-dimensional hydrocode simulations were performed with reactions disabled to illustrate where the experimental data deviate from the predicted inert response. Prompt initiation was observed in 144 μm thick HNS films at flyer velocities near 3000 m/s and in 125 μm thick PETN films at flyer velocities near 2400 m/s. This experimental setup enables rapid quantification of the growth of reactions in explosive materials that can reach detonation at sub-millimeter length scales. These data can subsequently be used for parameterizing reactive burn models in hydrocode simulations, as discussed in Paper II [D. E. Kittell, R. Knepper, and A. S. Tappan, J. Appl. Phys. 131, 154902 (2022)].

More Details

Non-Contact Mass Density and Thermal Conductivity Measurements of Organic Thin Films Using Frequency–Domain Thermoreflectance

Advanced Materials Interfaces

Perez, Christopher P.; Knepper, Robert; Marquez, Michael P.; Forrest, Eric C.; Tappan, Alexander S.; Asheghi, Mehdi; Goodson, Kenneth E.; Ziade, Elbara O.

Thin-film organic materials are broadly used to study amorphous stabilization of active pharmaceuticals, control explosive detonation phenomena, and introduce insulation in novel thermal barriers. Their synthesis, however, introduces defects and thickness variations that warrant careful characterization of local thermophysical properties such as thermal conductivity and mass density. Here, wide bandwidth (200 Hz to 20 MHz) frequency–domain thermoreflectance (FDTR) is demonstrated to simultaneously extract the thermal conductivity and mass density of 1 μm physical vapor-deposited indomethacin films on Si and SiO2 substrates, as well as 10 and 100 μm films on Si. By assuming a bulk specific heat capacity, mass densities are determined with FDTR measurements of volumetric heat capacity and are in good agreement with the literature, as well as models based upon a dependence on porosity and the kinetic theory for phonons. Lastly, it is found that for broad-band FDTR measurements, insulating substrates provide improved fidelity for the extraction of thermal conductivity and volumetric heat capacity in organic thin films. Overall, this work demonstrates the potential for FDTR as a non-contact method to determine microscale mass density variations across the surface and thickness of organic thin films.

More Details

Engineering the Microstructure and Morphology of Explosive Films via Control of Interfacial Energy

ACS Applied Materials and Interfaces

Forrest, Eric C.; Knepper, Robert; Brumbach, Michael T.; Rodriguez, Mark A.; Archuleta, Kim A.; Marquez, Michael P.; Tappan, Alexander S.

Physical vapor deposition of organic explosives enables growth of polycrystalline films with a unique microstructure and morphology compared to the bulk material. This study demonstrates the ability to control crystal orientation and porosity in pentaerythritol tetranitrate films by varying the interfacial energy between the substrate and the vapor-deposited explosive. Variation in density, porosity, surface roughness, and optical properties is achieved in the explosive film, with significant implications for initiation sensitivity and detonation performance of the explosive material. Various surface science techniques, including angle-resolved X-ray photoelectron spectroscopy and multiliquid contact angle analysis, are utilized to characterize interfacial characteristics between the substrate and explosive film. Optical microscopy and scanning electron microscopy of pentaerythritol tetranitrate surfaces and fracture cross sections illustrate the difference in morphology evolution and the microstructure achieved through surface energy modification. X-ray diffraction studies with the Tilt-A-Whirl three-dimensional pole figure rendering and texture analysis software suite reveal that high surface energy substrates result in a preferred (110) out-of-plane orientation of pentaerythritol tetranitrate crystallites and denser films. Low surface energy substrates create more randomly textured pentaerythritol tetranitrate and lead to nanoscale porosity and lower density films. This work furthers the scientific basis for interfacial engineering of polycrystalline organic explosive films through control of surface energy, enabling future study of dynamic and reactive detonative phenomena at the microscale. Results of this study also have potential applications to active pharmaceutical ingredients, stimuli-responsive polymer films, organic thin film transistors, and other areas.

More Details

Refractive Imaging of Air Shock Above Microscale Defects in Pentaerythritol Tetranitrate (PETN) Films

Propellants, Explosives, Pyrotechnics

Peguero II, Julio C.; Forrest, Eric C.; Knepper, Robert; Hargather, Michael J.; Tappan, Alexander S.; Marquez, Michael P.; Vasiliauskas, Jonathan G.; Rupper, Stephen G.

Physical vapor deposition (PVD) of high explosives can produce energetic samples with unique microstructure and morphology compared to traditional powder processing techniques, but challenges may exist in fabricating explosive films without defects. Deposition conditions and substrate material may promote microcracking and other defects in the explosive films. In this study, we investigate effects of engineered microscale defects (gaps) on detonation propagation and failure for pentaerythritol tetranitrate (PETN) films using ultra-high-speed refractive imaging and hydrocode modelling. Observations of the air shock above the gap reveal significant instabilities during gap crossing and re-ignition.

More Details

Investigating Typical Additive Manufacturing Defect Geometries using Physical Vapor Deposition Explosives as a Model System

AIP Conference Proceedings

O'Grady, Caitlin H.; Marquez, Michael P.; Rupper, Stephen G.; Vasiliauskas, Jonathan G.; Knepper, Robert; Son, Steven F.; Tappan, Alexander S.

Additive Manufacturing (AM) techniques are increasingly being utilized for energetic material processes and research. Energetic material samples fabricated using these techniques can develop artifacts or defects during the manufacturing process. In this work, we use Physical Vapor Deposition (PVD) of explosive samples as a model system to investigate the effects of typical AM artifact or defect geometries on detonation propagation. PVD techniques allow for precise control of geometry to simulate typical AM artifacts or defects embedded into explosive samples. This experiment specifically investigates triangular and diamond-shaped artifacts that can result during direct-ink-writing (Robocasting). Samples were prepared with different sizes of voids embedded into the films. An ultra-high-speed framing camera and streak camera were used to view the samples under dynamic shock loading. It was determined that both geometry and size of the defects have a significant impact on the detonation front.

More Details

Posters for AA/CE Reception

Kuether, Robert J.; Allensworth, Brooke M.; Backer, Adam B.; Chen, Elton Y.; Dingreville, Remi P.; Forrest, Eric C.; Knepper, Robert; Tappan, Alexander S.; Marquez, Michael P.; Vasiliauskas, Jonathan G.; Rupper, Stephen G.; Grant, Michael J.; Atencio, Lauren C.; Hipple, Tyler J.; Maes, Danae M.; Timlin, Jerilyn A.; Ma, Tian J.; Garcia, Rudy J.; Danford, Forest L.; Patrizi, Laura P.; Galasso, Jennifer G.; Draelos, Timothy J.; Gunda, Thushara G.; Venezuela, Otoniel V.; Brooks, Wesley A.; Anthony, Stephen M.; Carson, Bryan C.; Reeves, Michael J.; Roach, Matthew R.; Maines, Erin M.; Lavin, Judith M.; Whetten, Shaun R.; Swiler, Laura P.

Abstract not provided.

Effect of microstructure on the detonation behavior of vapor-deposited pentaerythritol tetranitrate (PETN) films

AIP Conference Proceedings

Knepper, Robert; Forrest, Eric C.; Marquez, Michael P.; Tappan, Alexander S.

The microstructure of pentaerythritol tetranitrate (PETN) films fabricated by physical vapor deposition can be altered substantially by changing the surface energy of the substrate on which they are deposited. High substrate surface energies lead to higher density, strongly textured films, while low substrate surface energies lead to lower density, more randomly oriented films. We take advantage of this behavior to create aluminum-confined PETN films with different microstructures depending on whether a vapor-deposited aluminum layer is exposed to atmosphere prior to PETN deposition. Detonation velocities are measured as a function of both PETN and aluminum thickness at near-failure conditions to elucidate the effects of microstructure on detonation behavior. The differences in microstructure produce distinct changes in detonation velocity but do not have a significant effect on failure geometry when confinement thicknesses are above the minimum effectively infinite condition.

More Details

Near-failure detonation behavior of vapor-deposited hexanitrostilbene (HNS) films

AIP Conference Proceedings

Knepper, Robert; Wixom, Ryan R.; Marquez, Michael P.; Tappan, Alexander S.

Hexanitrostilbene (HNS) films were deposited onto polycarbonate substrates using vacuum thermal sublimation. The deposition conditions were varied in order to alter porosity in the films, and the resulting microstructures were quantified by analyzing ion-polished cross-sections using scanning electron microscopy. The effects of these changes in microstructure on detonation velocity and the critical thickness needed to sustain detonation were determined. The polycarbonate substrates also acted as recording plates for detonation experiments, and films near the critical thickness displayed distinct patterns in the dent tracks that indicate instabilities in the detonation front when approaching failure conditions.

More Details

Pressure dependence of electronic states in secondary explosives: comparison between bulk and air/explosive interface

Farrow, Darcie F.; Farrow, Darcie F.; Kohl, Ian T.; Kohl, Ian T.; Rupper, Stephen G.; Rupper, Stephen G.; Alam, Mary K.; Alam, Mary K.; Martin, Laura E.; Martin, Laura E.; Fan, Hongyou F.; Fan, Hongyou F.; Bian, Kaifu B.; Bian, Kaifu B.; Knepper, Robert; Knepper, Robert; Marquez, Michael P.; Marquez, Michael P.; Kay, Jeffrey J.; Kay, Jeffrey J.

Abstract not provided.

Critical detonation thickness in vapor-deposited pentaerythritol tetranitrate (PETN) films

AIP Conference Proceedings

Tappan, Alexander S.; Knepper, Robert; Wixom, Ryan R.; Marquez, Michael P.; Ball, J.P.; Miller, Jill C.

The use of physical vapor deposition is an attractive technique to produce microenergetic samples to study sub-millimeter explosive behavior. Films of the high explosive PETN (pentaerythritol tetranitrate) were deposited through vacuum thermal sublimation. Deposition conditions were varied to understand the effect of substrate cooling capacity and substrate temperature during deposition. PETN films were characterized with surface profilometry and scanning electron microscopy. Detonation velocity versus PETN film thickness was analyzed using a variation of the standard form for analysis of the diameter effect. Results were compared with previous work conducted on PETN films deposited with lower substrate cooling capacity. Seemingly subtle variations in PETN deposition conditions led to differences in detonation behaviors such as critical thickness for detonation, detonation velocity at "infinite" thickness, and the shape of the critical thickness curves. © 2012 American Institute of Physics.

More Details
59 Results
59 Results