Development of low thermal budget Si epitaxy and high-k/ metal gate stack for atomically precise electronic devices
Abstract not provided.
Publications
Modeling and Assessment of Atomic Precision Advanced Manufacturing (APAM) Enabled Vertical Tunneling Field Effect Transistor
International Conference on Simulation of Semiconductor Processes and Devices, SISPAD
The atomic precision advanced manufacturing (APAM) enabled vertical tunneling field effect transistor (TFET) presents a new opportunity in microelectronics thanks to the use of ultra-high doping and atomically abrupt doping profiles. We present modeling and assessment of the APAM TFET using TCAD Charon simulation. First, we show, through a combination of simulation and experiment, that we can achieve good control of the gated channel on top of a phosphorus layer made using APAM, an essential part of the APAM TFET. Then, we present simulation results of a preliminary APAM TFET that predict transistor-like current-voltage response despite low device performance caused by using large geometry dimensions. Future device simulations will be needed to optimize geometry and doping to guide device design for achieving superior device performance.
FAIR DEAL Grand Challenge Overview
While it is likely practically a bad idea to shrink a transistor to the size of an atom, there is no arguing that it would be fantastic to have atomic-scale control over every aspect of a transistor – a kind of crystal ball to understand and evaluate new ideas. This project showed that it was possible to take a niche technique used to place dopants in silicon with atomic precision and apply it broadly to study opportunities and limitations in microelectronics. In addition, it laid the foundation to attaining atomic-scale control in semiconductor manufacturing more broadly.
Modeling and Assessment of Atomic Precision Advanced Manufacturing (APAM) Enabled Vertical Tunneling Field Effect Transistor
Abstract not provided.
Path towards a vertical TFET enabled by atomic precision advanced manufacturing
Abstract not provided.
Atomic Precision Advanced Manufacturing and Lessons for Area-Selective Deposition
Abstract not provided.
Stochastic atomistic disorder in atomic-precision doping
Abstract not provided.
Signatures of missing donors in transport through atomically precise P donor chains in Si
Abstract not provided.
A chemical model for atomic-precision single-donor incorporation of phosphorus atoms in Si(100)-2x1
Abstract not provided.
Room Temperature Operation of Donor-Based Atomically Precise Devices
Abstract not provided.
A Model for Atomic Precision p-Type Doping with Diborane on Si(100)-2×1
Journal of Physical Chemistry C
Diborane (B2H6) is a promising molecular precursor for atomic precision p-type doping of silicon that has recently been experimentally demonstrated [ Škereň et al. Nat. Electron. 2020 ]. We use density functional theory (DFT) calculations to determine the reaction pathway for diborane dissociating into a species that will incorporate as electrically active substitutional boron after adsorbing onto the Si(100)-2×1 surface. Our calculations indicate that diborane must overcome an energy barrier to adsorb, explaining the experimentally observed low sticking coefficient (<1 × 10-4 at room temperature) and suggesting that heating can be used to increase the adsorption rate. Upon sticking, diborane has an ≈50% chance of splitting into two BH3 fragments versus merely losing hydrogen to form a dimer such as B2H4. As boron dimers are likely electrically inactive, whether this latter reaction occurs is shown to be predictive of the incorporation rate. The dissociation process proceeds with significant energy barriers, necessitating the use of high temperatures for incorporation. Using the barriers calculated from DFT, we parameterize a Kinetic Monte Carlo model that predicts the incorporation statistics of boron as a function of the initial depassivation geometry, dose, and anneal temperature. Our results suggest that the dimer nature of diborane inherently limits its doping density as an acceptor precursor and furthermore that heating the boron dimers to split before exposure to silicon can lead to poor selectivity on hydrogen and halogen resists. This suggests that, while diborane works as an atomic precision acceptor precursor, other non-dimerized acceptor precursors may lead to higher incorporation rates at lower temperatures.
Photothermal alternative to device fabrication using atomic precision advanced manufacturing techniques
Journal of Micro/Nanopatterning, Materials and Metrology
The attachment of dopant precursor molecules to depassivated areas of hydrogen-terminated silicon templated with a scanning tunneling microscope (STM) has been used to create electronic devices with subnanometer precision, typically for quantum physics experiments. This process, which we call atomic precision advanced manufacturing (APAM), dopes silicon beyond the solid-solubility limit and produces electrical and optical characteristics that may also be useful for microelectronic and plasmonic applications. However, scanned probe lithography lacks the throughput required to develop more sophisticated applications. Here, we demonstrate and characterize an APAM device workflow where scanned probe lithography of the atomic layer resist has been replaced by photolithography. An ultraviolet laser is shown to locally and controllably heat silicon above the temperature required for hydrogen depassivation on a nanosecond timescale, a process resistant to under- and overexposure. STM images indicate a narrow range of energy density where the surface is both depassivated and undamaged. Modeling that accounts for photothermal heating and the subsequent hydrogen desorption kinetics suggests that the silicon surface temperatures reached in our patterning process exceed those required for hydrogen removal in temperature-programmed desorption experiments. A phosphorus-doped van der Pauw structure made by sequentially photodepassivating a predefined area and then exposing it to phosphine is found to have a similar mobility and higher carrier density compared with devices patterned by STM. Lastly, it is also demonstrated that photodepassivation and precursor exposure steps may be performed concomitantly, a potential route to enabling APAM outside of ultrahigh vacuum.
Room Temperature Operation of Donor-Based Atomically Precise Devices
Abstract not provided.
Triethyl Aluminium - A Precursor for Atomically-Precise Acceptor Dopant Placement?
Abstract not provided.
A multiscale model of the reaction pathway for p-type doping using diborane on Si(100)-2x1
Abstract not provided.
Stochastic atomistic disorder in atomic-precision doping
Abstract not provided.
Modeling assisted room temperature operation of atomic precision advanced manufacturing devices
International Conference on Simulation of Semiconductor Processes and Devices, SISPAD
One big challenge of the emerging atomic precision advanced manufacturing (APAM) technology for microelectronics application is to realize APAM devices that operate at room temperature (RT). We demonstrate that semiclassical technology computer aided design (TCAD) device simulation tool can be employed to understand current leakage and improve APAM device design for RT operation. To establish the applicability of semiclassical simulation, we first show that a semiclassical impurity scattering model with the Fermi-Dirac statistics can explain the very low mobility in APAM devices quite well; we also show semiclassical TCAD reproduces measured sheet resistances when proper mobility values are used. We then apply semiclassical TCAD to simulate current leakage in realistic APAM wires. With insights from modeling, we were able to improve device design, fabricate Hall bars, and demonstrate RT operation for the very first time.
Quantum Transport in Si:P δ-Layer Wires
2020 International Conference on Simulation of Semiconductor Processes and Devices (SISPAD)
Abstract not provided.
Quantum transport in Si:P δ-layer wires
Abstract not provided.
Modeling Assisted Room Temperature Operation of Atomic Precision Advanced Manufacturing Devices
Abstract not provided.
Photothermal alternative to device fabrication using atomic precision advanced manufacturing techniques
Abstract not provided.
21 Results