Publications

Results 1–25 of 124
Skip to search filters

Development of Single Photon Sources in GaN

Mounce, Andrew M.; Wang, George W.; Schultz, Peter A.; Titze, Michael T.; Campbell, DeAnna M.; Lu, Ping L.; Henshaw, Jacob D.

The recent discovery of bright, room-temperature, single photon emitters in GaN leads to an appealing alternative to diamond best single photon emitters given the widespread use and technological maturity of III-nitrides for optoelectronics (e.g. blue LEDs, lasers) and high-speed, high-power electronics. This discovery opens the door to on-chip and on-demand single photon sources integrated with detectors and electronics. Currently, little is known about the underlying defect structure nor is there a sense of how such an emitter might be controllably created. A detailed understanding of the origin of the SPEs in GaN and a path to deterministically introduce them is required. In this project, we develop new experimental capabilities to then investigate single photon emission from GaN nanowires and both GAN and AlN wafers. We ion implant our wafers with the ion implanted with our focused ion beam nanoimplantation capabilities at Sandia, to go beyond typical broad beam implantation and create single photon emitting defects with nanometer precision. We've created light emitting sources using Li+ and He+, but single photon emission has yet to be demonstrated. In parallel, we calculate the energy levels of defects and transition metal substitutions in GaN to gain a better understanding of the sources of single photon emission in GaN and AlN. The combined experimental and theoretical capabilities developed throughout this project will enable further investigation into the origins of single photon emission from defects in GaN, AlN, and other wide bandgap semiconductors.

More Details

Electronic structure of intrinsic defects in c -gallium nitride: Density functional theory study without the jellium approximation

Physical Review B

Edwards, Arthur H.; Schultz, Peter A.; Dobzynski, Richard M.

We report the first nonjellium, systematic, density functional theory (DFT) study of intrinsic and extrinsic defects and defect levels in zinc-blende (cubic) gallium nitride. We use the local moment counter charge (LMCC) method, the standard Perdew-Becke-Ernzerhoff (PBE) exchange-correlation potential, and two pseudopotentials, where the Ga 3d orbitals are either in the core (d0) or explicitly in the valence set (d10). We studied 64, 216, 512, and 1000 atom supercells, and demonstrated convergence to the infinite limit, crucial for delineating deep from shallow states near band edges, and for demonstrating the elimination of finite cell-size errors. Contrary to common claims, we find that exact exchange is not required to obtain defect levels across the experimental band gap. As was true in silicon, silicon carbide, and gallium arsenide, the extremal LMCC defect levels of the aggregate of defects yield an effective LMCC defect band gap that is within 10% of the experimental gap (3.3 eV) for both pseudopotentials. We demonstrate that the gallium vacancy is more complicated than previously reported. There is dramatic metastability-a nearest-neighbor nitrogen atom shifts into the gallium site, forming an antisite, nitrogen vacancy pair, which is more stable than the simple vacancy for positive charge states. Our assessment of the d0 and d10 pseudopotentials yields minimal differences in defect structures and defect levels. The better agreement of the d0 lattice constant with experiment suggests that the more computationally economical d0 pseudopotentials are sufficient to achieve the fidelity possible within the physical accuracy of DFT, and thereby enable calculations in larger supercells necessary to demonstrate convergence with respect to finite size supercell errors.

More Details

Theory of the metastable injection-bleached E3c center in GaAs

Physical Review B

Schultz, Peter A.; Hjalmarson, Harold P.

The E3 transition in irradiated GaAs observed in deep level transient spectroscopy (DLTS) was recently discovered in Laplace-DLTS to encompass three distinct components. The component designated E3c was found to be metastable, reversibly bleached under minority carrier (hole) injection, with an introduction rate dependent upon Si doping density. It is shown through first-principles modeling that the E3c must be the intimate Si-vacancy pair, best described as a Si sitting in a divacancy Sivv. The bleached metastable state is enabled by a doubly site-shifting mechanism: Upon recharging, the defect undergoes a second site shift rather returning to its original E3c-active configuration via reversing the first site shift. Identification of this defect offers insights into the short-time annealing kinetics in irradiated GaAs.

More Details

Atomic step disorder on polycrystalline surfaces leads to spatially inhomogeneous work functions

Journal of Vacuum Science and Technology A

Bussmann, Ezra B.; smith, sean w.; Scrymgeour, David S.; Brumbach, Michael T.; Lu, Ping L.; Dickens, Sara D.; Michael, Joseph R.; Ohta, Taisuke O.; Hjalmarson, Harold P.; Schultz, Peter A.; Clem, Paul G.; Hopkins, Matthew M.; Moore, Christopher M.

Structural disorder causes materials’ surface electronic properties, e.g., work function ([Formula: see text]), to vary spatially, yet it is challenging to prove exact causal relationships to underlying ensemble disorder, e.g., roughness or granularity. For polycrystalline Pt, nanoscale resolution photoemission threshold mapping reveals a spatially varying [Formula: see text] eV over a distribution of (111) vicinal grain surfaces prepared by sputter deposition and annealing. With regard to field emission and related phenomena, e.g., vacuum arc initiation, a salient feature of the [Formula: see text] distribution is that it is skewed with a long tail to values down to 5.4 eV, i.e., far below the mean, which is exponentially impactful to field emission via the Fowler–Nordheim relation. We show that the [Formula: see text] spatial variation and distribution can be explained by ensemble variations of granular tilts and surface slopes via a Smoluchowski smoothing model wherein local [Formula: see text] variations result from spatially varying densities of electric dipole moments, intrinsic to atomic steps, that locally modify [Formula: see text]. Atomic step-terrace structure is confirmed with scanning tunneling microscopy (STM) at several locations on our surfaces, and prior works showed STM evidence for atomic step dipoles at various metal surfaces. From our model, we find an atomic step edge dipole [Formula: see text] D/edge atom, which is comparable to values reported in studies that utilized other methods and materials. Our results elucidate a connection between macroscopic [Formula: see text] and the nanostructure that may contribute to the spread of reported [Formula: see text] for Pt and other surfaces and may be useful toward more complete descriptions of polycrystalline metals in the models of field emission and other related vacuum electronics phenomena, e.g., arc initiation.

More Details

A New Route to Quantum-Scale Structures through a Novel Enhanced Germanium Diffusion Mechanism

Wang, George T.; Lu, Ping L.; Sapkota, Keshab R.; Baczewski, Andrew D.; Campbell, Quinn C.; Schultz, Peter A.; Jones, Kevin S.; Turner, Emily M.; Sharrock, Chappel J.; Law, Mark E.; Yang, Hongbin Y.

This project sought to develop a fundamental understanding of the mechanisms underlying a newly observed enhanced germanium (Ge) diffusion process in silicon germanium (SiGe) semiconductor nanostructures during thermal oxidation. Using a combination of oxidationdiffusion experiments, high resolution imaging, and theoretical modeling, a model for the enhanced Ge diffusion mechanism was proposed. Additionally, a nanofabrication approach utilizing this enhanced Ge diffusion mechanism was shown to be applicable to arbitrary 3D shapes, leading to the fabrication of stacked silicon quantum dots embedded in SiGe nanopillars. A new wet etch-based method for preparing 3D nanostructures for highresolution imaging free of obscuring material or damage was also developed. These results enable a new method for the controlled and scalable fabrication of on-chip silicon nanostructures with sub-10 nm dimensions needed for next generation microelectronics, including low energy electronics, quantum computing, sensors, and integrated photonics.

More Details

First-principles calculations of metal surfaces. I. Slab-consistent bulk reference for convergent surface properties

Physical Review B

Schultz, Peter A.

The first-principles computation of the surfaces of metals is typically accomplished through slab calculations of finite thickness. The extraction of a convergent surface formation energy from slab calculations is dependent upon defining an appropriate bulk reference energy. I describe a method for an independently computed, slab-consistent bulk reference that leads to convergent surface formation energies from slab calculations that also provides realistic uncertainties for the magnitude of unavoidable nonlinear divergence in the surface formation energy with slab thickness. The accuracy is demonstrated on relaxed, unreconstructed low-index aluminum surfaces with slabs with up to 35 layers.

More Details

First-principles calculations of metal surfaces. II. Properties of low-index platinum surfaces toward understanding electron emission

Physical Review B

Schultz, Peter A.; Hjalmarson, Harold P.; Berg, Morgann B.; Bussmann, Ezra B.; Scrymgeour, David S.; Ohta, Taisuke O.; Moore, Christopher H.

The stability of low-index platinum surfaces and their electronic properties is investigated with density functional theory, toward the goal of understanding the surface structure and electron emission, and identifying precursors to electrical breakdown, on nonideal platinum surfaces. Propensity for electron emission can be related to a local work function, which, in turn, is intimately dependent on the local surface structure. The (1×N) missing row reconstruction of the Pt(110) surface is systematically examined. The (1×3) missing row reconstruction is found to be the lowest in energy, with the (1×2) and (1×4) slightly less stable. In the limit of large (1×N) with wider (111) nanoterraces, the energy accurately approaches the asymptotic limit of the infinite Pt(111) surface. This suggests a local energetic stability of narrow (111) nanoterraces on free Pt surfaces that could be a common structural feature in the complex surface morphologies, leading to work functions consistent with those on thermally grown Pt substrates.

More Details

Theoretical study of intrinsic defects in cubic silicon carbide 3C -SiC

Physical Review B

Schultz, Peter A.; Van Ginhoven, Renee M.; Edwards, Arthur H.

Using the local moment counter charge (LMCC) method to accurately represent the asymptotic electrostatic boundary conditions within density functional theory supercell calculations, we present a comprehensive analysis of the atomic structure and energy levels of point defects in cubic silicon carbide (3C-SiC). Finding that the classical long-range dielectric screening outside the supercell induced by a charged defect is a significant contributor to the total energy. we describe and validate a modified Jost screening model to evaluate this polarization energy. This leads to bulk-converged defect levels in finite size supercells. With the LMCC boundary conditions and a standard Perdew-Burke-Ernzerhof (PBE) exchange correlation functional, the computed defect level spectrum exhibits no band gap problem: the range of defect levels spans ∼2.4eV, an effective defect band gap that agrees with the experimental band gap. Comparing with previous literature, our LMCC-PBE defect results are in consistent agreement with the hybrid-exchange functional results of Oda et al. [J. Chem. Phys. 139, 124707 (2013)JCPSA60021-960610.1063/1.4821937] rather than their PBE results. The difference with their PBE results is attributed to their use of a conventional jellium approximation rather than the more rigorous LMCC approach for handling charged supercell boundary conditions. The difference between standard dft and hybrid functional results for defect levels lies not in a band gap problem but rather in solving a boundary condition problem. The LMCC-PBE entirely mitigates the effect of the band gap problem on defect levels. The more computationally economical PBE enables a systematic exploration of 3C-SiC defects, where, most notably, we find that the silicon vacancy undergoes Jahn-Teller-induced distortions from the previously assumed Td symmetry, and that the divacancy, like the silicon vacancy, exhibits a site-shift bistability in p-type conditions.

More Details

Modelling Charged Defects in Non-Cubic Semiconductors for Radiation Effects Studies in Next Generation Materials

Schultz, Peter A.

This final report summarizes the results of the Laboratory Directed Research and Devel- opment (LDRD) Project Number 212587 entitled "Modeling Charged Defects in Non-Cubic Semiconductors for Radiation Effects Studies in Next Generation Electronic Materials" . The goal of this project was to extend a predictive capability for modeling defect level energies using first principle density functional theory methods (e.g., for radiation effects assessments) to semiconductors with non-cubic crystal structures. Computational methods that proved accurate for predicting defect levels in standard cubic semiconductors, were found to have shortcomings when applied to the lowered symmetry structures prevalent in next generation electronic materials such as SiC, GaN, and Ga203, stemming from an error in the treatment of the electrostatic boundary conditions. I describe methods to generalized the local moment countercharge (LMCC) scheme to position a charge in bulk supercell calculations of charged defects, circumventing the problem of measuring a dipole in a periodically replicated bulk calculation.

More Details
Results 1–25 of 124
Results 1–25 of 124