By integrating readily available generic sensors with a more sophisticated sensor, Sandia researchers have developed a detection system that promises to make it easier to catch perpetrators trying to infiltrate prohibited areas.
Researchers from Embedded Sensor System Dept. 2623 and Exploratory Real Time Systems Dept. 5432 spent the last four months of FY06 figuring out how small, low-cost, low-power, commercially available sensors can supplement their in-house customized sensors developed between 2002 and 2005. During that time, numerous projects — Target Acquisition, Location, Observation, and Neutralization (TALON), Hard and Deeply Buried Target Grand Challenge (HDBT), Sensor Dart, and Virtual Perimeter System (VPS) — contributed to the advancement of unattended ground sensor (UGS) technology.
As a result, Sandia has solidified a sensor system complete with onboard GPS, compass, local and long-haul radios, digital signal processor, and video capabilities. However, it is significantly larger than the off-the-shelf sensors and is not currently available for mass production.
“We wanted inexpensive sensors to act as a first line of defense identifying potential targets and then through a series of radio signals wake up the UGS package. The Sandia-developed UGS package could then use advanced pattern-recognition techniques to classify four-legged animals, two-legged humans, or civilian and military vehicles,” says Hung Nguyen (5432), project investigator. “The significance of this is that by combining commercial sensors with our UGS, we can cover more ground for less.”
The integration of the more powerful sensor and the smaller ones will increase detection range, lower false alarms, and increase the area of coverage per dollar spent in complex terrains.
The $75,000 in funding for the off-the-shelf sensor work came through Sandia’s internal Laboratory Directed Research and Development (LDRD) program. It was “late start” money awarded near the end of the fiscal year to help solve a specific problem.
The commercial sensors, provided by Crossbow Technology, Inc. were modified with Sandia algorithms and some minor hardware changes. They can be powered by either a battery or solar panel, depending on customer needs. The sensor uses a geophone equipped with a four-inch pointed spike planted in the ground to detect movement by measuring seismic waves. To complete the situational awareness package Isaac Toledo (5432) describes how the system is both “an elegant and seamless network configuration capable of self-configuring and self-healing.” Any events detected are reported back to the UGS via this network.
“Our customized unattended ground sensors work extremely well for monitoring various situations but for wide areas can be very costly,” says Mark Ladd, Dept. 2623 manager. “Using the commercial sensors in combination with a handful of our UGS devices is a viable alternate solution.”
Researcher Jonathan Van Houten (2623) says one potential application of the sensor system would be to strategically place off-the-shelf sensors at out-of-sight locations around a secure facility. The Sandia UGS would be placed nearby and video-linked to a security station monitored by guards.
“You could put them in arroyos or other places guards can’t immediately see,” Jeremy Giron (2623) says. “If an intruder shows up, the commercial sensors can send a signal to the Sandia UGS, which in turn performs more analysis and notifies the guard via Google Earth.”
Now that the initial integration of commercial sensors with custom UGS has been demonstrated, Mark is quick to point out that the next logical step is to seek out customers interested in both advancing and deploying this architecture. These sensors will also become part of the intrusion detection work done by 6429.
“We are eager to propel this system to the next level and meet a need that we know is out there,” Mark says. “Eventually the technology would be transferred to a manufacturer.”