Post, August 7, 2026 • (Argonne National Laboratory) PART A of this handbook is for metal alloy fuels. The metal alloy of transuranic elements (i.e., Pu, Np, Am, Cm, etc) in Zr, designated as TRU-Zr, is one of the primary candidate fuel types for the AAA system. The data found in the literature were critically...
Documentation & Knowledge Management
Current Filters
Clear all
Advanced Manufacturing of Thermal Protection System Tiles for Space Plane Atmospheric Reentry
Post, August 7, 2026 • (Oak Ridge National Laboratory, Sierra Space Corporation) Thermal protection systems (TPS) constitute a major material, engineering, and manufacturing challenge for space access. Atmospheric re-entry generates very high heats and requires advanced materials to withstand such conditions. Combining the required materials and integrating them into the vehicle is a major engineering...
Computational Materials for Qualification and Certification (CM4QC) Strategy Document: Maturation of Computational Materials Methods for Aviation-Focused Qualification and Certification of Metal Additive Manufacturing (as an Example of Process-Intensive Materials)
Post, August 7, 2026 • (National Aeronautics and Space Administration, Federal Aviation Administration) This report was written to address the U.S. aviation industry’s need to increase the efficiency of qualification and certification (Q&C) of process-intensive aviation components through the maturation and adoption of computational materials (CM) methods. A key challenge in the introduction of these...
Cybersecurity Framework Manufacturing Profile Low Security Level Example Implementations for Discrete-based Manufacturing System Datasets
Post, August 7, 2026 • (National Institute of Standards and Technology) The Cybersecurity Framework Manufacturing Profile Low Security Level Example Implementations Guide provides example proof-of-concept solutions demonstrating how open-source and commercial off-the-shelf (COTS) products that are currently available today can be implemented in manufacturing environments to satisfy the requirements in the Cybersecurity Framework (CSF) Manufacturing...
Cybersecurity Framework Version 2.0 Semiconductor Manufacturing Profile (Initial Public Draft)
Post, August 7, 2026 • (National Institute of Standards and Technology) The NIST Cybersecurity Framework Version 2.0 Semiconductor Manufacturing Profile provides a voluntary, risk-based approach for managing cybersecurity activities and reducing cyber risk to the overall semiconductor manufacturing process. The Profile is a supplement to current cybersecurity standards, regulations, and industry guidelines that are already...
Handbook of Advanced Manufactured Material Properties From TCR Structure Builds at ORNL (FY2019)
Post, August 7, 2026 • (Oak Ridge National Laboratory, Argonne National Laboratory) There is growing interest in the use of additive manufacturing techniques for the production and deployment of components for nuclear power applications. Specifically, the Transformational Challenge Reactor (TRC) program seeks to demonstrate the application of advanced manufacturing to rapidly develop and deploy a...
Handbook on the Material Properties of FeCrAl Alloys for Nuclear Power Production Applications (FY18 Version: Revision 1)
Post, August 7, 2026 • (Oak Ridge National Laboratory, Brookhaven National Laboratory) FeCrAl alloys are a class of alloys that have seen increased interest for nuclear power applications including accident tolerant fuel cladding, structural components for fast fission reactors, and as first wall and blanket structures for fusion reactors. FeCrAl alloys are under consideration for...
MatLib 1.2: Nuclear Material Properties Library
Post, August 7, 2026 • (Pacific Northwest National Laboratory, Nuclear Regulatory Commission) The U.S. Nuclear Regulatory Commission (NRC) uses the computer code Fuel Analysis under Steady-state and Transients (FAST) to model steady-state and transient fuel behavior to support regulatory decisions. FAST relies on a material properties library (MatLib) that contains the thermal and mechanical properties...
Metallic Fuel Handbook, Parts 1 and 2
Post, August 7, 2026 • (Idaho National Laboratory) This is revision 3 of the Metallic Fuels Handbook, which is a summary and critical assessment of data involving elements and alloys in the U-Np-Pu-Am-La-Ce-Pr-Nd-Zr system. This Handbook is intended to provide information needed by fuel modelers, project managers, and researchers interested in understanding not only what...
NIST Chemistry WebBook
Post, August 7, 2026 • (National Institute of Standards and Technology) This site provides thermochemical, thermophysical, and ion energetics data compiled by NIST under the Standard Reference Data Program. Link to Dataset NIST Chemistry WebBookDate last updated: March, 2025
Photopolymer Additive Manufacturing 2025 Workshop Report: Building a Unified Vision from Research to Regulation
Post, August 7, 2026 • (National Institute of Standards and Technology) The third biannual Photopolymer Additive Manufacturing Alliance Workshop was held on September 15-16, 2025, at the University of Colorado Boulder to continue its mission of advancing photopolymer additive manufacturing (PAM). Building on the 2023 PAMA Workshop, the 2025 iteration brought together leaders from industry,...
Reference Knowledge Graphs of STEP and QIF Data for a Three-Part Box Assembly
Post, August 7, 2026 • (National Institute of Standards and Technology) This dataset provides reference ontologies that were translated from product design and inspection data from the National Institute of Standards and Technology (NIST) Smart Manufacturing Systems (SMS) Test Bed. The examples represents a three-component assembly of a box, machined from Aluminum, and has a...