Publications

100 Results
Skip to search filters

An Atomistic Introduction to Orientation Relations Between Phases in the Face-centered Cubic to Body-centered Cubic Phase Transition in Iron and Steel

Wills, Ann E.; Thompson, Aidan P.; Raman, Sumathy R.

We establish an atomistic view of the high- and low-temperature phases of iron/steel as well as some elements of the phase transition between these phases on cooling. In particular we examine the 4 most common orientation relationships between the high temperature austen- ite and low-temperature ferrite phases seen in experiment. With a thorough understanding of these relationships we are prepared to set up various atomistic simulations, using tech- niques such as Density Functional Theory and Molecular Dynamics, to further study the phase transition, in particular, quantities needed for Phase Field Modeling, such as the free energies of bulk phases and the phase transition front propagation velocity.

More Details
TYPE SAND Report YEAR 2017
OSTIDOI

Short Introduction to Relations Between Thermodynamic Quantities

Wills, Ann E.

Thermodynamic quantities, such as pressure and internal energy, and their derivatives, are used in many applications. Depending on application, a natural set of quantities related to one of four thermodynamic potentials are typically used. For example, hydro-codes use in- ternal energy derived quantities and Equation of State work often uses Helmholtz free energy quantities. When performing work spanning over several fields, transformations between one set of quantities and another set of quantities are often needed. A short, but comprehensive, review of such transformations are given in this report.

More Details
TYPE SAND Report YEAR 2016
OSTIDOI

Equation of State Model Quality Study for Ti and Ti64

Wills, Ann E.; Sanchez, Jason J.

Titanium and the titanium alloy Ti64 (6% aluminum, 4% vanadium and the balance ti- tanium) are materials used in many technologically important applications. To be able to computationally investigate and design these applications, accurate Equations of State (EOS) are needed and in many cases also additional constitutive relations. This report describes what data is available for constructing EOS for these two materials, and also describes some references giving data for stress-strain constitutive models. We also give some suggestions for projects to achieve improved EOS and constitutive models. In an appendix, we present a study of the 'cloud formation' issue observed in the ALEGRA code. This issue was one of the motivating factors for this literature search of available data for constructing improved EOS for Ti and Ti64. However, the study shows that the cloud formation issue is only marginally connected to the quality of the EOS, and, in fact, is a physical behavior of the system in question. We give some suggestions for settings in, and improvements of, the ALEGRA code to address this computational di culty.

More Details
TYPE SAND Report YEAR 2015
OSTIDOI

Assessing the standard Molybdenum projector augmented wave VASP potentials

Wills, Ann E.

Density Functional Theory (DFT) based Equation of State (EOS) construction is a prominent part of Sandia’s capabilities to support engineering sciences. This capability is based on augmenting experimental data with information gained from computational investigations, especially in those parts of the phase space where experimental data is hard, dangerous, or expensive to obtain. A key part of the success of the Sandia approach is the fundamental science work supporting the computational capability. Not only does this work enhance the capability to perform highly accurate calculations but it also provides crucial insight into the limitations of the computational tools, providing high confidence in the results even where results cannot be, or have not yet been, validated by experimental data. This report concerns the key ingredient of projector augmented-wave (PAW) potentials for use in pseudo-potential computational codes. Using the tools discussed in SAND2012-7389 we assess the standard Vienna Ab-initio Simulation Package (VASP) PAWs for Molybdenum.

More Details
TYPE SAND Report YEAR 2014
OSTIDOI

Development of ab initio techniques critical for future science-based explosives R&D

Wixom, Ryan R.; Wills, Ann E.

Density Functional Theory (DFT) has emerged as an indispensable tool in materials research, since it can accurately predict properties of a wide variety of materials at both equilibrium and extreme conditions. However, for organic molecular crystal explosives, successful application of DFT has largely failed due to the inability of current exchange-correlation functionals to correctly describe intermolecular van der Waals (vdWs) forces. Despite this, we have discovered that even with no treatment of vdWs bonding, the AM05 functional and DFT based molecular dynamics (MD) could be used to study the properties of molecular crystals under compression. We have used DFT-MD to predict the unreacted Hugoniots for PETN and HNS and validated the results by comparison with crystalline and porous experimental data. Since we are also interested in applying DFT methods to study the equilibrium volume properties of explosives, we studied the nature of the vdWs bonding in pursuit of creating a new DFT functional capable of accurately describing equilibrium bonding of molecular crystals. In this report we discuss our results for computing shock Hugoniots of molecular crystals and also what was learned about the nature of bonding in these materials.

More Details
TYPE SAND Report YEAR 2013
OSTIDOI

ALEGRA Update: Modernization and Resilience Progress

Robinson, Allen C.; Petney, Sharon P.; Drake, Richard R.; Weirs, Vincent G.; Adams, Brian M.; Vigil, Dena V.; Carpenter, John H.; Garasi, Christopher J.; Wong, Michael K.; Robbins, Joshua R.; Siefert, Christopher S.; Strack, Otto E.; Wills, Ann E.; Trucano, Timothy G.; Bochev, Pavel B.; Summers, Randall M.; Stewart, James R.; Ober, Curtis C.; Rider, William J.; Haill, Thomas A.; Lemke, Raymond W.; Cochrane, Kyle C.; Desjarlais, Michael P.; Love, Edward L.; Voth, Thomas E.; Mosso, Stewart J.; Niederhaus, John H.

Abstract not provided.

More Details
TYPE Conference YEAR 2013
OSTI

New density functional theory approaches for enabling prediction of chemical and physical properties of plutonium and other actinides

Wills, Ann E.

Density Functional Theory (DFT) based Equation of State (EOS) construction is a prominent part of Sandia's capabilities to support engineering sciences. This capability is based on amending experimental data with information gained from computational investigations, in parts of the phase space where experimental data is hard, dangerous, or expensive to obtain. A prominent materials area where such computational investigations are hard to perform today because of limited accuracy is actinide and lanthanide materials. The Science of Extreme Environment Lab Directed Research and Development project described in this Report has had the aim to cure this accuracy problem. We have focused on the two major factors which would allow for accurate computational investigations of actinide and lanthanide materials: (1) The fully relativistic treatment needed for materials containing heavy atoms, and (2) the needed improved performance of DFT exchange-correlation functionals. We have implemented a fully relativistic treatment based on the Dirac Equation into the LANL code RSPt and we have shown that such a treatment is imperative when calculating properties of materials containing actinides and/or lanthanides. The present standard treatment that only includes some of the relativistic terms is not accurate enough and can even give misleading results. Compared to calculations previously considered state of the art, the Dirac treatment gives a substantial change in equilibrium volume predictions for materials with large spin-orbit coupling. For actinide and lanthanide materials, a Dirac treatment is thus a fundamental requirement in any computational investigation, including those for DFT-based EOS construction. For a full capability, a DFT functional capable of describing strongly correlated systems such as actinide materials need to be developed. Using the previously successful subsystem functional scheme developed by Mattsson et.al., we have created such a functional. In this functional the Harmonic Oscillator Gas is providing the necessary reference system for the strong correlation and localization occurring in actinides. Preliminary testing shows that the new Hao-Armiento-Mattsson (HAM) functional gives a trend towards improved results for the crystalline copper oxide test system we have chosen. This test system exhibits the same exchange-correlation physics as the actinide systems do, but without the relativistic effects, giving access to a pure testing ground for functionals. During the work important insights have been gained. An example is that currently available functionals, contrary to common belief, make large errors in so called hybridization regions where electrons from different ions interact and form new states. Together with the new understanding of functional issues, the Dirac implementation into the RSPt code will permit us to gain more fundamental understanding, both quantitatively and qualitatively, of materials of importance for Sandia and the rest of the Nuclear Weapons complex.

More Details
TYPE SAND Report YEAR 2012
OSTIDOI

Calculating Hugoniots for molecular crystals from first principles

Wills, Ann E.; Wixom, Ryan R.; Mattsson, Thomas M.

Density Functional Theory (DFT) has over the last few years emerged as an indispensable tool for understanding the behavior of matter under extreme conditions. DFT based molecular dynamics simulations (MD) have for example confirmed experimental findings for shocked deuterium, enabled the first experimental evidence for a triple point in carbon above 850 GPa, and amended experimental data for constructing a global equation of state (EOS) for water, carrying implications for planetary physics. The ability to perform high-fidelity calculations is even more important for cases where experiments are impossible to perform, dangerous, and/or prohibitively expensive. For solid explosives, and other molecular crystals, similar success has been severely hampered by an inability of describing the materials at equilibrium. The binding mechanism of molecular crystals (van der Waals forces) is not well described within traditional DFT. Among widely used exchange-correlation functionals, neither LDA nor PBE balances the strong intra-molecular chemical bonding and the weak inter-molecular attraction, resulting in incorrect equilibrium density, negatively affecting the construction of EOS for undetonated high explosives. We are exploring a way of bypassing this problem by using the new Armiento-Mattsson 2005 (AM05) exchange-correlation functional. The AM05 functional is highly accurate for a wide range of solids, in particular in compression. In addition, AM05 does not include any van der Waals attraction, which can be advantageous compared to other functionals: Correcting for a fictitious van der Waals like attraction with unknown origin can be harder than correcting for a complete absence of all types of van der Waals attraction. We will show examples from other materials systems where van der Waals attraction plays a key role, where this scheme has worked well, and discuss preliminary results for molecular crystals and explosives.

More Details
TYPE Conference YEAR 2010
OSTI

On calculating the equilibrium structure of molecular crystals

Wills, Ann E.; Wixom, Ryan R.; Mattsson, Thomas M.

The difficulty of calculating the ambient properties of molecular crystals, such as the explosive PETN, has long hampered much needed computational investigations of these materials. One reason for the shortcomings is that the exchange-correlation functionals available for Density Functional Theory (DFT) based calculations do not correctly describe the weak intermolecular van der Waals' forces present in molecular crystals. However, this weak interaction also poses other challenges for the computational schemes used. We will discuss these issues in the context of calculations of lattice constants and structure of PETN with a number of different functionals, and also discuss if these limitations can be circumvented for studies at non-ambient conditions.

More Details
TYPE Conference YEAR 2010
OSTI

LDRD 102610 final report new processes for innovative microsystems engineering with predictive simulation

Wills, Ann E.

This LDRD Final report describes work that Stephen W. Thomas performed in 2006. The initial problem was to develop a modeling, simulation, and optimization strategy for the design of a high speed microsystem switch. The challenge was to model the right phenomena at the right level of fidelity, and capture the right design parameters. This effort focused on the design context, in contrast to other Sandia efforts focus on high-fidelity assessment. This report contains the initial proposal and the annual progress report. This report also describes exploratory work on micromaching using femtosecond lasers. Steve's time developing a proposal and collaboration on this topic was partly funded by this LDRD.

More Details
TYPE SAND Report YEAR 2007
OSTIDOI

Surface effects in semiconductor interstitial formation energies

Sandia journal manuscript; Not yet accepted for publication

Wills, Ann E.; Wixom, Ryan R.

In this work, we examine the formation energies of interstitials in semiconductors obtained with four different pure functionals. Explicitely we investigate three silicon self-interstitials. All functionals give the same trend among those interstitials; the lowest energy being for formation of the <110>-split, somewhat higher energy for the formation of the hexagonal interstitial, while highest energy among the three is obtained for the meta-stable tetragonal configuration. However, the value for the formation energy for a specific interstitial differs substantially in calculations using different functionals. It is shown that the main contribution to these differences is stemming from the functionals different surface intrinsic errors. We also discuss the puzzle that the values obtained with the surface intrisic error free AM05 functional (Armiento and Mattsson, Phys. Rev. B 72, 085108 (2006)) gives values substantially lower than Quantum Monte Carlo results

More Details
TYPE Journal Article YEAR 2007
OSTI

Beyond the local density approximation : improving density functional theory for high energy density physics applications

Modine, N.A.; Wright, Alan F.; Muller, Richard P.; Sears, Mark P.; Wills, Ann E.; Desjarlais, Michael P.

A finite temperature version of 'exact-exchange' density functional theory (EXX) has been implemented in Sandia's Socorro code. The method uses the optimized effective potential (OEP) formalism and an efficient gradient-based iterative minimization of the energy. The derivation of the gradient is based on the density matrix, simplifying the extension to finite temperatures. A stand-alone all-electron exact-exchange capability has been developed for testing exact exchange and compatible correlation functionals on small systems. Calculations of eigenvalues for the helium atom, beryllium atom, and the hydrogen molecule are reported, showing excellent agreement with highly converged quantumMonte Carlo calculations. Several approaches to the generation of pseudopotentials for use in EXX calculations have been examined and are discussed. The difficult problem of finding a correlation functional compatible with EXX has been studied and some initial findings are reported.

More Details
TYPE SAND Report YEAR 2006
OSTIDOI

Iterative optimized effective potential and exact exchange calculations at finite temperature

Modine, N.A.; Wright, Alan F.; Muller, Richard P.; Sears, Mark P.; Wills, Ann E.; Desjarlais, Michael P.

We report the implementation of an iterative scheme for calculating the Optimized Effective Potential (OEP). Given an energy functional that depends explicitly on the Kohn-Sham wave functions, and therefore, implicitly on the local effective potential appearing in the Kohn-Sham equations, a gradient-based minimization is used to find the potential that minimizes the energy. Previous work has shown how to find the gradient of such an energy with respect to the effective potential in the zero-temperature limit. We discuss a density-matrix-based derivation of the gradient that generalizes the previous results to the finite temperature regime, and we describe important optimizations used in our implementation. We have applied our OEP approach to the Hartree-Fock energy expression to perform Exact Exchange (EXX) calculations. We report our EXX results for common semiconductors and ordered phases of hydrogen at zero and finite electronic temperatures. We also discuss issues involved in the implementation of forces within the OEP/EXX approach.

More Details
TYPE Conference YEAR 2006
OSTI

A functional designed to include surface effects into self-consistent density-functional theory calculations

Wills, Ann E.

We present an exchange-correlation functional that enables an accurate treatment of systems with electronic surfaces. The functional is developed within the subsystem functional paradigm [1], combining the local density approximation for interior regions with a new functional designed for surface regions. It is validated for a variety of materials by calculations of: (i) properties where surface effects exist, and (ii) established bulk properties. Good and coherent results are obtained, indicating that this functional may serve well as universal first choice for solid state systems. The good performance of this first subsystem functional also suggests that yet improved functionals can be constructed by this approach.

More Details
TYPE Conference YEAR 2005
OSTI

Building improved functionals for self-consistent DFT by better treatment of electronic surface regions

Wills, Ann E.

We develop a specialized treatment of electronic surface regions which, via the subsystem functional approach [1], can be used in functionals for self-consistent density-functional theory (DFT). Approximations for both exchange and correlation energies are derived for an electronic surface. An interpolation index is used to combine this surface-specific functional with a functional for interior regions. When the local density approximation (LDA) is used for the interior region, the end result is a straightforward density-gradient dependent functional that shows promising results. Further improvement of the treatment of the interior region by the use of a local gradient expansion approximation is also discussed.

More Details
TYPE Conference YEAR 2005
OSTI

A functional designed to include surface effects in self-consistent DFT

Proposed for publication in Physical Review Letters.

Wills, Ann E.

We design a density-functional-theory (DFT) exchange-correlation functional that enables an accurate treatment of systems with electronic surfaces. Surface-specific approximations for both exchange and correlation energies are developed. A subsystem functional approach is then used: an interpolation index combines the surface functional with a functional for interior regions. When the local density approximation is used in the interior, the result is a straightforward functional for use in self-consistent DFT. The functional is validated for two metals (Al, Pt) and one semiconductor (Si) by calculations of (i) established bulk properties (lattice constants and bulk moduli) and (ii) a property where surface effects exist (the vacancy formation energy). Good and coherent results indicate that this functional may serve well as a universal first choice for solid-state systems and that yet improved functionals can be constructed by this approach.

More Details
TYPE Journal Article YEAR 2005
OSTI

Equation of state for a high-density glass

Wills, Ann E.; Wills, Ann E.

Properties of relevance for the equation of state for a high-density glass are discussed. We review the effects of failure waves, comminuted phase, and compaction on the validity of the Mie-Grueneisen EOS. The specific heat and the Grueneisen parameter at standard conditions for a {rho}{sub 0} = 5.085 g/cm{sup 3} glass ('Glass A') is then estimated to be 522 mJ/g/K and 0.1-0.3, respectively. The latter value is substantially smaller than the value of 2.1751 given in the SESAME tables for a high-density glass with {rho}{sub 0} = 5.46 g/cm{sup 3}. The present unusual value of the Grueneisen parameter is confirmed from the volume dependence determined from fitting the Mie-Grueneisen EOS to shock data in Ref. [2].

More Details
TYPE Conference YEAR 2003
OSTI
100 Results
100 Results