Publications

Results 26–50 of 76
Skip to search filters

New Design Principles for Cold Electronics

2019 IEEE SOI-3D-Subthreshold Microelectronics Technology Unified Conference, S3S 2019

DeBenedictis, Erik; Frank, Michael P.

Josephson junctions, cryogenic CMOS, and adiabatic circuits were proposed as computing options decades ago, but never got traction due to competition from room-temperature CMOS. However, quantum computer control electronics naturally requires cryogenic temperatures, making a deeper investigation of these technologies timely.We argue that a technology hybrid and new system design principles are needed, which we illustrate with adiabatic cryo-CMOS circuits playing an unanticipated but very important role.Transistor redesign will lead to even further improvement beyond what's illustrated in this paper, but more research will be needed to know how much.

More Details

Asynchronous Ballistic Reversible Fluxon Logic

IEEE Transactions on Applied Superconductivity

Frank, Michael P.; Lewis, Rupert; Missert, Nancy A.; Wolak, Matthaeus W.; Henry, Michael D.

In a previous paper, we described a new abstract circuit model for reversible computation called asynchronous ballistic reversible computing (ABRC), in which localized information-bearing pulses propagate ballistically along signal paths between stateful abstract devices and elastically scatter off those devices serially, while updating the device state in a logically-reversible and deterministic fashion. The ABRC model has been shown to be capable of universal computation. In the research reported here, we begin exploring how the ABRC model might be realized in practice using single flux quantum solitons (fluxons) in superconducting Josephson junction (JJ) circuits. One natural family of realizations could utilize fluxon polarity to represent binary data in individual pulses propagating near-ballistically, along discrete or continuous long Josephson junctions or microstrip passive transmission lines, and utilize the flux charge (-1, 0, +1) of a JJ-containing superconducting loop with Φ0 < IcL < 2Φ0 to encode a ternary state variable internal to a device. A natural question then arises as to which of the definable abstract ABRC device functionalities using this data representation might be implementable using a JJ circuit that dissipates only a small fraction of the input fluxon energy. We discuss conservation rules and symmetries considered as constraints to be obeyed in these circuits, and begin the process of classifying the possible ABRC devices in this family having up to three bidirectional I/O terminals, and up to three internal states.

More Details

Measuring Changes in Inductance with Microstrip Resonators

IEEE Transactions on Applied Superconductivity

Lewis, Rupert; Henry, Michael D.; Young, Travis R.; Frank, Michael P.; Wolak, Matthaeus W.; Missert, Nancy A.

We measure the frequency dependence of a niobium microstrip resonator as a function of temperature from 1.4 to 8.4 K. In a 2-micrometer-wide half-wave resonator, we find the frequency of resonance changes by a factor of 7 over this temperature range. From the resonant frequencies, we extract inductance per unit length, characteristic impedance, and propagation velocity (group velocity). We discuss how these results relate to superconducting electronics. Over the 2 K to 6 K temperature range where superconducting electronic circuits operate, inductance shows a 19% change and both impedance and propagation velocity show an 11% change.

More Details

Semi-Automated Design of Functional Elements for a New Approach to Digital Superconducting Electronics: Methodology and Preliminary Results

ISEC 2019 - International Superconductive Electronics Conference

Frank, Michael P.; Lewis, Rupert; Missert, Nancy A.; Henry, M.D.; Wolak, Matthaeus W.; Debenedictis, Erik P.

In an ongoing project at Sandia National Laboratories, we are attempting to develop a novel style of superconducting digital processing, based on a new model of reversible computation called Asynchronous Ballistic Reversible Computing (ABRC). We envision an approach in which polarized flux-ons scatter elastically from near-lossless functional components, reversibly updating the local digital state of the circuit, while dissipating only a small fraction of the input fluxon energy. This approach to superconducting digital computation is sufficiently unconventional that an appropriate methodology for hand-design of such circuits is not immediately obvious. To gain insight into the design principles that are applicable in this new domain, we are creating a software tool to automatically enumerate possible topologies of reactive, undamped Josephson junction circuits, and sweep the parameter space of each circuit searching for designs exhibiting desired dynamical behaviors. But first, we identified by hand a circuit implementing the simplest possible nontrivial ABRC functional behavior with bits encoded as conserved polarized fluxons, namely, a one-bit reversible memory cell with one bidirectional I/O port. We expect the tool to be useful for designing more complex circuits.

More Details

Memory System Design for Ultra Low Power, Computationally Error Resilient Processor Microarchitectures

Proceedings - International Symposium on High-Performance Computer Architecture

Srikanth, Sriseshan; Rabbat, Paul G.; Hein, Eric R.; Deng, Bobin; Conte, Thomas M.; DeBenedictis, Erik; Cook, Jeanine C.; Frank, Michael P.

Dennard scaling ended a decade ago. Energy reduction by lowering supply voltage has been limited because of guard bands and a subthreshold slope of over 60mV/decade in MOSFETs. On the other hand, newly-proposed logic devices maintain a high on/off ratio for drain currents even at significantly lower operating voltages. However, such ultra low power technology would eventually suffer from intermittent errors in logic as a result of operating close to the thermal noise floor. Computational error correction mitigates this issue by efficiently correcting stochastic bit errors that may occur in computational logic operating at low signal energies, thereby allowing for energy reduction by lowering supply voltage to tens of millivolts. Cores based on a Redundant Residual Number System (RRNS), which represents a number using a tuple of smaller numbers, are a promising candidate for implementing energyefficient computational error correction. However, prior RRNS core microarchitectures abstract away the memory hierarchy and do not consider the power-performance impact of RNS-based memory addressing. When compared with a non-error-correcting core addressing memory in binary, naive RNS-based memory addressing schemes cause a slowdown of over 3x/2x for inorder/out-of-order cores respectively. In this paper, we analyze RNS-based memory access pattern behavior and provide solutions in the form of novel schemes and the resulting design space exploration, thereby, extending and enabling a tangible, ultra low power RRNS based architecture.

More Details

Physical foundations of Landauer’s principle

Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)

Frank, Michael P.

We review the physical foundations of Landauer’s Principle, which relates the loss of information from a computational process to an increase in thermodynamic entropy. Despite the long history of the Principle, its fundamental rationale and proper interpretation remain frequently misunderstood. Contrary to some misinterpretations of the Principle, the mere transfer of entropy between computational and non-computational subsystems can occur in a thermodynamically reversible way without increasing total entropy. However, Landauer’s Principle is not about general entropy transfers; rather, it more specifically concerns the ejection of (all or part of) some correlated information from a controlled, digital form (e.g., a computed bit) to an uncontrolled, non-computational form, i.e., as part of a thermal environment. Any uncontrolled thermal system will, by definition, continually re-randomize the physical information in its thermal state, from our perspective as observers who cannot predict the exact dynamical evolution of the microstates of such environments. Thus, any correlations involving information that is ejected into and subsequently thermalized by the environment will be lost from our perspective, resulting directly in an irreversible increase in thermodynamic entropy. Avoiding the ejection and thermalization of correlated computational information motivates the reversible computing paradigm, although the requirements for computations to be thermodynamically reversible are less restrictive than frequently described, particularly in the case of stochastic computational operations. There are interesting possibilities for the design of computational processes that utilize stochastic, many-to-one computational operations while nevertheless avoiding net entropy increase that remain to be fully explored.

More Details

Challenges & Roadmap for Beyond CMOS Computing Simulation

Rodrigues, Arun; Frank, Michael P.

Simulating HPC systems is a difficult task and the emergence of “Beyond CMOS” architectures and execution models will increase that difficulty. This document presents a “tutorial” on some of the simulation challenges faced by conventional and non-conventional architectures (Section 1) and goals and requirements for simulating Beyond CMOS systems (Section 2). These provide background for proposed short- and long-term roadmaps for simulation efforts at Sandia (Sections 3 and 4). Additionally, a brief explanation of a proof-of-concept integration of a Beyond CMOS architectural simulator is presented (Section 2.3).

More Details

On the energy consequences of information for spacecraft systems

2017 IEEE International Conference on Wireless for Space and Extreme Environments, WiSEE 2017

Lyke, James; Mee, Jesse; Edwards, Arthur; Pineda, Andrew; DeBenedictis, Erik; Frank, Michael P.

Conventional wisdom in the spacecraft domain is that on-orbit computation is expensive, and thus, information is traditionally funneled to the ground as directly as possible. The explosion of information due to larger sensors, the advancements of Moore's law, and other considerations lead us to revisit this practice. In this article, we consider the trade-off between computation, storage, and transmission, viewed as an energy minimization problem.

More Details

Asynchronous Ballistic Reversible Computing

2017 IEEE International Conference on Rebooting Computing, ICRC 2017 - Proceedings

Frank, Michael P.

Most existing concepts for hardware implementation of reversible computing invoke an adiabatic computing paradigm, in which individual degrees of freedom (e.g., node voltages) are synchronously transformed under the influence of externallysupplied driving signals. But distributing these "power/clock" signals to all gates within a design while efficiently recovering their energy is difficult. Can we reduce clocking overhead using a ballistic approach, wherein data signals self-propagating between devices drive most state transitions? Traditional concepts of ballistic computing, such as the classic Billiard-Ball Model, typically rely on a precise synchronization of interacting signals, which can fail due to exponential amplification of timing differences when signals interact. In this paper, we develop a general model of Asynchronous Ballistic Reversible Computing (ABRC) that aims to address these problems by eliminating the requirement for precise synchronization between signals. Asynchronous reversible devices in this model are isomorphic to a restricted set of Mealy finite-state machines. We explore ABRC devices having up to 3 bidirectional I/O terminals and up to 2 internal states, identifying a simple pair of such devices that comprises a computationally universal set of primitives. We also briefly discuss how ABRC might be implemented using single flux quanta in superconducting circuits.

More Details
Results 26–50 of 76
Results 26–50 of 76