Deformation Mechanisms in Nanocrystalline Pt-Au: Competition of Grain Boundary Embrittlement and Compositional Crack Arrest
Abstract not provided.
Publications
Atomistic simulation techniques to model hydrogen segregation and hydrogen embrittlement in metallic materials
Handbook of Mechanics of Materials
Hydrogen embrittlement is an important phenomenon where the mechanical properties of a metallic material are degraded in the presence of hydrogen, sometimes leading to a change in the failure mode of the metallic material. Although mechanical failures due to hydrogen embrittlement have been observed for over a century, the atomic-level mechanisms associated with the hydrogen embrittlement process are still under debate. In this chapter, atomistic simulation efforts focused on hydrogen segregation and hydrogen embrittlement are reviewed. Atomistic simulation methods provide a nanoscale modeling technique capable of studying the role of hydrogen atoms on dislocation nucleation, crack propagation, and grain boundary decohesion. Examples are provided in this chapter of the use of a site-energy selection method to study hydrogen segregation and molecular dynamics simulations to study hydrogen-induced grain boundary decohesion in nickel. Grain boundary strength and work of separation in the presence of segregated hydrogen are computed from the molecular dynamics simulations. Subsequently, this data may be used in higher length scale models and simulations of the hydrogen embrittlement process.
New nanoscale toughening mechanisms mitigate embrittlement in binary nanocrystalline alloys
Nanoscale
Nanocrystalline metals offer significant improvements in structural performance over conventional alloys. However, their performance is limited by grain boundary instability and limited ductility. Solute segregation has been proposed as a stabilization mechanism, however the solute atoms can embrittle grain boundaries and further degrade the toughness. In the present study, we confirm the embrittling effect of solute segregation in Pt-Au alloys. However, more importantly, we show that inhomogeneous chemical segregation to the grain boundary can lead to a new toughening mechanism termed compositional crack arrest. Energy dissipation is facilitated by the formation of nanocrack networks formed when cracks arrested at regions of the grain boundaries that were starved in the embrittling element. This mechanism, in concert with triple junction crack arrest, provides pathways to optimize both thermal stability and energy dissipation. A combination of in situ tensile deformation experiments and molecular dynamics simulations elucidate both the embrittling and toughening processes that can occur as a function of solute content.
New nanoscale toughening mechanisms mitigate embrittlement in binary nanocrystalline alloys
Abstract not provided.
Thermodynamic & Mechanical Stability of Solute Segregated Grain Boundaries
Abstract not provided.
Probabilistic Assessment of Stress Corrosion Cracking of SNF Dry Storage Canisters
Abstract not provided.
NSRD-15:Computational Capability to Substantiate DOE-HDBK-3010 Data
Safety basis analysts throughout the U.S. Department of Energy (DOE) complex rely heavily on the information provided in the DOE Handbook, DOE-HDBK-3010, Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities, to determine radionuclide source terms from postulated accident scenarios. In calculating source terms, analysts tend to use the DOE Handbook’s bounding values on airborne release fractions (ARFs) and respirable fractions (RFs) for various categories of insults (representing potential accident release categories). This is typically due to both time constraints and the avoidance of regulatory critique. Unfortunately, these bounding ARFs/RFs represent extremely conservative values. Moreover, they were derived from very limited small-scale bench/laboratory experiments and/or from engineered judgment. Thus, the basis for the data may not be representative of the actual unique accident conditions and configurations being evaluated. The goal of this research is to develop a more accurate and defensible method to determine bounding values for the DOE Handbook using state-of-art multi-physics-based computer codes.
Grain boundary phase transformations in PtAu and relevance to thermal stabilization of bulk nanocrystalline metals
Journal of Materials Science
There has recently been a great deal of interest in employing immiscible solutes to stabilize nanocrystalline microstructures. Existing modeling efforts largely rely on mesoscale Monte Carlo approaches that employ a simplified model of the microstructure and result in highly homogeneous segregation to grain boundaries. However, there is ample evidence from experimental and modeling studies that demonstrates segregation to grain boundaries is highly non-uniform and sensitive to boundary character. This work employs a realistic nanocrystalline microstructure with experimentally relevant global solute concentrations to illustrate inhomogeneous boundary segregation. Furthermore, experiments quantifying segregation in thin films are reported that corroborate the prediction that grain boundary segregation is highly inhomogeneous. In addition to grain boundary structure modifying the degree of segregation, the existence of a phase transformation between low and high solute content grain boundaries is predicted. In order to conduct this study, new embedded atom method interatomic potentials are developed for Pt, Au, and the PtAu binary alloy.
Nanocrystalline Pt-Au MEMS Electrical Switches
Abstract not provided.
Is intrinsic nanocrystalline stability practically achievable? Insights from investigations with Pt-Au alloys
Abstract not provided.
Rapidly Detecting Rare Incipient Defect States at the
Abstract not provided.
Catching the Embryo of Fatigue Crack Nucleation in Nanocrystalline Metals
Abstract not provided.
Grain Boundary Phase Transformations in PtAu: Connections to Nanostructure Stability
Abstract not provided.
Fragmentation prediction for a brittle ceramic: A integrated two-scale model approach
Abstract not provided.
In-situ TEM Observations of Grain Growth during High-cycle Fatigue and Notch Fatigue:
Abstract not provided.
Evidence that abnormal grain growth precedes crack initiation in nanocrystalline metals
Abstract not provided.
Alloy stabilization of nano crystalline grain structures: Case study of Pt-Au
Abstract not provided.
Dissociation of sarin on a cement analogue surface: Effects of humidity and confined geometry
Journal of Physical Chemistry C
First-principles molecular dynamics simulations were used to investigate the dissociation of sarin (GB) on the calcium silicate hydrate (CSH) mineral tobermorite (TBM), a surrogate for cement. CSH minerals (including TBM) and amorphous materials of similar composition are the major components of Portland cement, the binding agent of concrete. Metadynamics simulations were used to investigate the effect of the TBM surface and confinement in a microscale pore on the mechanism and free energy of dissociation of GB. Our results indicate that both the adsorption site and the humidity of the local environment significantly affect the sarin dissociation energy. In particular, sarin dissociation in a low-water environment occurs via a dealkylation mechanism, which is consistent with previous experimental studies.
Hydrogen segregation to inclined twin grain boundaries in nickel
Philosophical Magazine
Low-mobility twin grain boundaries dominate the microstructure of grain boundary-engineered materials and are critical to understanding their plastic deformation behaviour. The presence of solutes, such as hydrogen, has a profound effect on the thermodynamic stability of the grain boundaries. This work examines the case of a ∑3 grain boundary at inclinations from 0° ≤ Ф ≤ 90°. The angle ≤ corresponds to the rotation of the ∑3(111) ‹110› (coherent) into the ∑3(112) ‹110› (lateral) twin boundary. To this end, atomistic models of inclined grain boundaries, utilising empirical potentials, are used to elucidate the finite-temperature boundary structure while grand canonical Monte Carlo models are applied to determine the degree of hydrogen segregation. In order to understand the boundary structure and segregation behaviour of hydrogen, the structural unit description of inclined twin grain boundaries is found to provide insight into explaining the observed variation of excess enthalpy and excess hydrogen concentration on inclination angle, but the explanatory power is limited by how the enthalpy of segregation is affected by hydrogen concentration. At higher concentrations, the grain boundaries undergo a defaceting transition. In order to develop a more complete mesoscale model of the interfacial behaviour, an analytical model of boundary energy and hydrogen segregation that relies on modelling the boundary as arrays of discrete 1/3‹111› disconnections is constructed. Furthermore, the complex interaction of boundary reconstruction and concentration-dependent segregation behaviour exhibited by inclined twin grain boundaries limits the range of applicability of such an analytical model and illustrates the fundamental limitations for a structural unit model description of segregation in lower stacking fault energy materials.
Hydrogen segregation to grain boundaries in nickel
Abstract not provided.
Detecting the onset of fatigue failure in nanocrystalline metals
Abstract not provided.
Misoriented grain boundaries vicinal to the twin in Nickel part II: Thermodynamics of hydrogen segregation
Philosophical Magazine
Grain boundary engineered materials are of immense interest for their resistance to hydrogen embrittlement. This work builds on the work undertaken in Part I on the thermodynamic stability and structure of misoriented grain boundaries vicinal to the (coherent-twin) boundary to examine hydrogen segregation to those boundaries. The segregation of hydrogen reflects the asymmetry of the boundary structure with the sense of rotation of the grains about the coherent-twin boundary, and the temperature-dependent structural transition present in one sense of misorientation. This work also finds that the presence of hydrogen affects a change in structure of the boundaries with increasing concentration. The structural change effects only one sense of misorientation and results in the reduction in length of the emitted stacking faults. Moreover, the structural change results in the generation of occupied sites populated by more strongly bound hydrogen. The improved understanding of misoriented twin grain boundary structure and the effect on hydrogen segregation resulting from this work is relevant to higher length-scale models. To that end, we examine commonly used metrics such as free volume and atomic stress at the boundary. Free volume is found not to be useful as a surrogate for predicting the degree of hydrogen segregation, whereas the volumetric virial stress reliably predicts the locations of hydrogen segregation and exclusion at concentrations below saturation or the point where structural changes are induced by increasing hydrogen concentration. This manuscript has been authored by Sandia Corporation under Contract No. DE-AC04-94AL85000 with the U.S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes.
Misoriented grain boundaries vicinal to the twin in nickel Part I: Thermodynamics & temperature-dependent structure
Philosophical Magazine
Grain boundary-engineered materials are of immense interest for their corrosion resistance, fracture resistance and microstructural stability. This work contributes to a larger goal of understanding both the structure and thermodynamic properties of grain boundaries vicinal (within) to the (coherent twin) boundary which is found in grain boundary-engineered materials. The misoriented boundaries vicinal to the twin show structural changes at elevated temperatures. In the case of nickel, this transition temperature is substantially below the melting point and at temperatures commonly reached during processing, making the existence of such boundaries very likely in applications. Thus, the thermodynamic stability of such features is thoroughly investigated in order to predict and fully understand the structure of boundaries vicinal to twins. Low misorientation angle grain boundaries () show distinct disconnections which accommodate misorientation in opposite senses. The two types of disconnection have differing lowerature structures which show different temperature-dependent behaviours with one type undergoing a structural transition at approximately 600 K. At misorientation angles greater than approximately, the discrete disconnection nature is lost as the disconnections merge into one another. Free energy calculations demonstrate that these high-angle boundaries, which exhibit a transition from a planar to a faceted structure, are thermodynamically more stable in the faceted configuration.
Atomistic Insights into the Effects of Segregation to Grain Boundaries
Abstract not provided.
Grain Growth in Alloys: Atomistic and Phase Field Perspectives
Abstract not provided.
Results 1–25 of 39