Publications

13 Results
Skip to search filters

Reversible computing with fast, fully static, fully adiabatic CMOS

Proceedings - 2020 International Conference on Rebooting Computing, ICRC 2020

Frank, Michael P.; Brocato, Robert W.; Tierney, Brian D.; Missert, Nancy A.; Hsia, Alexander H.

To advance the energy efficiency of general digital computing far beyond the thermodynamic limits that apply to conventional digital circuits will require utilizing the principles of reversible computing. It has been known since the early 1990s that reversible computing based on adiabatic switching is possible in CMOS, although almost all the “adiabatic” CMOS logic families in the literature are not actually fully adiabatic, which limits their achievable energy savings. The first CMOS logic style achieving truly, fully adiabatic operation if leakage was negligible (CRL) was not fully static, which led to practical engineering difficulties in the presence of certain nonidealities. Later, “static” adiabatic logic families were described, but they were not actually fully adiabatic, or fully static, and were much slower. In this paper, we describe a new logic family, Static 2-Level Adiabatic Logic (S2LAL), which is, to our knowledge, the first CMOS logic family that is both fully static, and truly, fully adiabatic (modulo leakage). In addition, S2LAL is, we think, the fastest possible such family (among fully pipelined sequential circuits), having a latency per logic stage of one tick (transition time), and a minimum clock period (initiation interval) of 8 ticks. S2LAL requires 8 phases of a trapezoidal power-clock waveform (plus constant power and ground references) to be supplied. We argue that, if implemented in a suitable fabrication process designed to aggressively minimize leakage, S2LAL should be capable of demonstrating a greater level of energy efficiency than any other semiconductor-based digital logic family known today.

More Details

Asynchronous Ballistic Reversible Fluxon Logic

IEEE Transactions on Applied Superconductivity

Frank, Michael P.; Lewis, Rupert; Missert, Nancy A.; Wolak, Matthaeus W.; Henry, Michael D.

In a previous paper, we described a new abstract circuit model for reversible computation called asynchronous ballistic reversible computing (ABRC), in which localized information-bearing pulses propagate ballistically along signal paths between stateful abstract devices and elastically scatter off those devices serially, while updating the device state in a logically-reversible and deterministic fashion. The ABRC model has been shown to be capable of universal computation. In the research reported here, we begin exploring how the ABRC model might be realized in practice using single flux quantum solitons (fluxons) in superconducting Josephson junction (JJ) circuits. One natural family of realizations could utilize fluxon polarity to represent binary data in individual pulses propagating near-ballistically, along discrete or continuous long Josephson junctions or microstrip passive transmission lines, and utilize the flux charge (-1, 0, +1) of a JJ-containing superconducting loop with Φ0 < IcL < 2Φ0 to encode a ternary state variable internal to a device. A natural question then arises as to which of the definable abstract ABRC device functionalities using this data representation might be implementable using a JJ circuit that dissipates only a small fraction of the input fluxon energy. We discuss conservation rules and symmetries considered as constraints to be obeyed in these circuits, and begin the process of classifying the possible ABRC devices in this family having up to three bidirectional I/O terminals, and up to three internal states.

More Details

Measuring Changes in Inductance with Microstrip Resonators

IEEE Transactions on Applied Superconductivity

Lewis, Rupert; Henry, Michael D.; Young, Travis R.; Frank, Michael P.; Wolak, Matthaeus W.; Missert, Nancy A.

We measure the frequency dependence of a niobium microstrip resonator as a function of temperature from 1.4 to 8.4 K. In a 2-micrometer-wide half-wave resonator, we find the frequency of resonance changes by a factor of 7 over this temperature range. From the resonant frequencies, we extract inductance per unit length, characteristic impedance, and propagation velocity (group velocity). We discuss how these results relate to superconducting electronics. Over the 2 K to 6 K temperature range where superconducting electronic circuits operate, inductance shows a 19% change and both impedance and propagation velocity show an 11% change.

More Details

Semi-Automated Design of Functional Elements for a New Approach to Digital Superconducting Electronics: Methodology and Preliminary Results

ISEC 2019 - International Superconductive Electronics Conference

Frank, Michael P.; Lewis, Rupert; Missert, Nancy A.; Henry, M.D.; Wolak, Matthaeus W.; Debenedictis, Erik P.

In an ongoing project at Sandia National Laboratories, we are attempting to develop a novel style of superconducting digital processing, based on a new model of reversible computation called Asynchronous Ballistic Reversible Computing (ABRC). We envision an approach in which polarized flux-ons scatter elastically from near-lossless functional components, reversibly updating the local digital state of the circuit, while dissipating only a small fraction of the input fluxon energy. This approach to superconducting digital computation is sufficiently unconventional that an appropriate methodology for hand-design of such circuits is not immediately obvious. To gain insight into the design principles that are applicable in this new domain, we are creating a software tool to automatically enumerate possible topologies of reactive, undamped Josephson junction circuits, and sweep the parameter space of each circuit searching for designs exhibiting desired dynamical behaviors. But first, we identified by hand a circuit implementing the simplest possible nontrivial ABRC functional behavior with bits encoded as conserved polarized fluxons, namely, a one-bit reversible memory cell with one bidirectional I/O port. We expect the tool to be useful for designing more complex circuits.

More Details

Final report on grand challenge LDRD project : a revolution in lighting : building the science and technology base for ultra-efficient solid-state lighting

Simmons, J.A.; Fischer, Arthur J.; Crawford, Mary H.; Abrams, B.L.; Biefeld, Robert M.; Koleske, Daniel K.; Allerman, A.A.; Figiel, J.J.; Creighton, J.R.; Coltrin, Michael E.; Tsao, Jeffrey Y.; Mitchell, Christine C.; Kerley, Thomas M.; Wang, George T.; Bogart, Katherine B.; Seager, Carleton H.; Campbell, Jonathan C.; Follstaedt, D.M.; Norman, Adam K.; Kurtz, S.R.; Wright, Alan F.; Myers, S.M.; Missert, Nancy A.; Copeland, Robert G.; Provencio, P.N.; Wilcoxon, Jess P.; Hadley, G.R.; Wendt, J.R.; Kaplar, Robert K.; Shul, Randy J.; Rohwer, Lauren E.; Tallant, David T.; Simpson, Regina L.; Moffat, Harry K.; Salinger, Andrew G.; Pawlowski, Roger P.; Emerson, John A.; Thoma, Steven T.; Cole, Phillip J.; Boyack, Kevin W.; Garcia, Marie L.; Allen, Mark S.; Burdick, Brent B.; Rahal, Nabeel R.; Monson, Mary A.; Chow, Weng W.; Waldrip, Karen E.

This SAND report is the final report on Sandia's Grand Challenge LDRD Project 27328, 'A Revolution in Lighting -- Building the Science and Technology Base for Ultra-Efficient Solid-state Lighting.' This project, which for brevity we refer to as the SSL GCLDRD, is considered one of Sandia's most successful GCLDRDs. As a result, this report reviews not only technical highlights, but also the genesis of the idea for Solid-state Lighting (SSL), the initiation of the SSL GCLDRD, and the goals, scope, success metrics, and evolution of the SSL GCLDRD over the course of its life. One way in which the SSL GCLDRD was different from other GCLDRDs was that it coincided with a larger effort by the SSL community - primarily industrial companies investing in SSL, but also universities, trade organizations, and other Department of Energy (DOE) national laboratories - to support a national initiative in SSL R&D. Sandia was a major player in publicizing the tremendous energy savings potential of SSL, and in helping to develop, unify and support community consensus for such an initiative. Hence, our activities in this area, discussed in Chapter 6, were substantial: white papers; SSL technology workshops and roadmaps; support for the Optoelectronics Industry Development Association (OIDA), DOE and Senator Bingaman's office; extensive public relations and media activities; and a worldwide SSL community website. Many science and technology advances and breakthroughs were also enabled under this GCLDRD, resulting in: 55 publications; 124 presentations; 10 book chapters and reports; 5 U.S. patent applications including 1 already issued; and 14 patent disclosures not yet applied for. Twenty-six invited talks were given, at prestigious venues such as the American Physical Society Meeting, the Materials Research Society Meeting, the AVS International Symposium, and the Electrochemical Society Meeting. This report contains a summary of these science and technology advances and breakthroughs, with Chapters 1-5 devoted to the five technical task areas: 1 Fundamental Materials Physics; 2 111-Nitride Growth Chemistry and Substrate Physics; 3 111-Nitride MOCVD Reactor Design and In-Situ Monitoring; 4 Advanced Light-Emitting Devices; and 5 Phosphors and Encapsulants. Chapter 7 (Appendix A) contains a listing of publications, presentations, and patents. Finally, the SSL GCLDRD resulted in numerous actual and pending follow-on programs for Sandia, including multiple grants from DOE and the Defense Advanced Research Projects Agency (DARPA), and Cooperative Research and Development Agreements (CRADAs) with SSL companies. Many of these follow-on programs arose out of contacts developed through our External Advisory Committee (EAC). In h s and other ways, the EAC played a very important role. Chapter 8 (Appendix B) contains the full (unedited) text of the EAC reviews that were held periodically during the course of the project.

More Details
13 Results
13 Results