4. Simulation Setup

• 4.1. Input File Basics
  • 4.1.1. Anatomy of an Input Deck
  • 4.1.2. Aprepro Scripting
• 4.2. Mesh
  • 4.2.1. Finite element model
  • 4.2.2. Assemblies
  • 4.2.3. Adaptivity
• 4.3. Linear Solvers
  • 4.3.1. Tpetra Solver Overview
  • 4.3.2. Solver Error Codes
  • 4.3.3. Expert Syntax
  • 4.3.4. Solver Selection Guidelines
  • 4.3.5. Tolerance Settings
• 4.4. Material Properties
  • 4.4.1. Basic Material Properties
  • 4.4.2. Cantera Material Properties
  • 4.4.3. Tabulated Material Properties
  • 4.4.4. Volume-Of-Fluid Material Properties
  • 4.4.5. Composite Material Properties
• 4.5. Solution Control
  • 4.5.1. Transient Analysis
  • 4.5.2. Variable Initialization
• 4.6. Time Control
• 4.7. Transfer
  • 4.7.1. Field
  • 4.7.2. Location
  • 4.7.3. Skeleton Examples
• 4.8. Units
• 4.9. Solution Options
  • 4.9.1. Equations To Solve
  • 4.9.2. Linear Solvers
  • 4.9.3. Coordinate System
  • 4.9.4. Source terms
  • 4.9.5. Smoothing Method
  • 4.9.6. Advection Methods
  • 4.9.7. Nonlinear Iteration Settings
  • 4.9.8. Turbulence Model
  • 4.9.9. Buoyancy Model
• 4.10. Boundary Conditions
  • 4.10.1. Open
  • 4.10.2. Inflow
  • 4.10.3. Wall
  • 4.10.4. Wall Mass Inject
  • 4.10.5. Symmetry
  • 4.10.6. Periodic
  • 4.10.7. Mass Flux
  • 4.10.8. Composite
  • 4.10.9. Fixed
  • 4.10.10. Heat Flux
  • 4.10.11. Non-Conformal
• 4.11. Initial Conditions
• 4.12. Fire Features
  • 4.12.1. MPMD Radiation
  • 4.12.2. EDC Combustion Model
  • 4.12.3. Flamelet Combustion Model
• 4.13. Post-Processing
  • 4.13.1. Boundary Fluxes
  • 4.13.2. General Post-Processing
  • 4.13.3. Averaging
• 4.14. Output Reference
  • 4.14.1. Results Output
  • 4.14.2. Heartbeat Output
  • 4.14.3. Output Scheduling
• 4.15. Restart Reference
• 4.16. IO Region
  • 4.16.1. Controlling Time
• 4.17. Particles
  • 4.17.1. Particle Setup
  • 4.17.2. Modifications to the Fuego Region
  • 4.17.3. Particle Output
  • 4.17.4. Advanced Options