Additive Manufacturing

Publications

Experimental

B. Boyce, B. Salzbrenner, J. Rodelas, L. Swiler, J. Madison, B. Jared, Y. Shen, Extreme‐Value Statistics Reveal Rare Failure‐Critical Defects in Additive Manufacturing, Advanced Engineering Materials, 19(8) (2017) 1-10.

B. Jared, M. Aguilo, L. Beghini, B. Boyce, B. Clark, A. Cook, B. Kaehr, J. Robbins, Additive Manufacturing: Toward Holistic Design, Scripta Materialia, 135 (2017) 141-147.

B. Salzbrenner, J. Rodelas, J. Madison, B. Jared, L. Swiler, Y. Shen, B. Boyce, High-Throughput Stochastic Tensile Performance of Additively Manufactured Stainless Steel, Journal of Materials Processing Technology, 241 (2017) 1-12.

J.D. Madison, O.D. Underwood, L.P. Swiler, B.L. Boyce, B.H. Jared, J.M. Rodelas, B.C. Salzbrenner, Corroborating Tomographic Defect Metrics with Mechanical Response in an Additively Manufactured Precipitation-Hardened Stainless Steel, 44th Annual Review of Progress in Quantitative Nondestructive Evaluation, Vol 37 1949(1) (2018) 020009.

P. Yang, M.A. Rodriguez, L.A. Deibler, B.H. Jared, J. Griego, A. Kilgo, A. Allen, D.K. Stefan, Effect of thermal annealing on microstructure evolution and mechanical behavior of an additive manufactured AlSi10Mg part, Journal of Materials Research 33(12) (2018) 1701-1712.

R.F. Schaller, J.M. Taylor, J. Rodelas, E.J. Schindelholz, Corrosion Properties of Powder Bed Fusion Additively Manufactured 17-4 PH Stainless Steel, Corrosion 73(7) (2017) 796-807.

R.F. Schaller, A. Mishra, J.M. Rodelas, J.M. Taylor, E.J. Schindelholz, The Role of Microstructure and Surface Finish on the Corrosion of Selective Laser Melted 304L, Journal of The Electrochemical Society 165(5) (2018) C234-C242.

N. Yang, J. Yee, B. Zheng, K. Gaiser, T. Reynolds, L. Clemon, W. Lu, J. Schoenung, E. Lavernia, Process-structure-property relationships for 316L stainless steel fabricated by additive manufacturing and its implication for component engineering, Journal of Thermal Spray Technology 26(4) (2017) 610-626.

C.B. Finfrock, A. Exil, J.D. Carroll, L. Deibler, Effect of Hot Isostatic Pressing and Powder Feedstock on Porosity, Microstructure, and Mechanical Properties of Selective Laser Melted AlSi10Mg, Metallography, Microstructure, and Analysis  (2018) 1-14.

Modeling & Simulation

T.M. Rodgers, J.E. Bishop, J.D. Madison, “Direct Numerical Simulation of Mechanical Response in Synthetic Additively Manufactured Microstructures" Modelling & Simulation in Materials Science and Engineering 2018, 26(5)

T.M. Rodgers, J. Mitchell, V. Tikare, “A Monte Carlo model for 3D grain evolution during welding" Modelling & Simulation in Materials Science and Engineering 2017, 25(6)

T.M. Rodgers, J. Madison, V. Tikare, “Simulation of Metal Additive Manufacturing Microstructures Using Kinetic Monte Carlo" Computational Materials Science 2017, 135: p. 78-89

E. Popova, T.M. Rodgers, X. Gong, A Cecen, J. Madison, S. Kalidindi, “Process-Structure Linkages Using a Data Science Approach: Application to Simulated Additive Manufacturing Data" Integr Mater Manuf Innov 2017

T.M. Rodgers, J. Madison, V. Tikare, M. Maguire, “Predicting Mesoscale Microstructural Evolution in Electron Beam Welding" JOM 2016, 68(5): p. 1419-1426

Stender, M.E., Beghini, L.L., Sugar, J.D., Veilleux, M.G., Subia, S.R., Smith, T.R., San Marchi, C.W., Brown, A.A., Dagel, D.J., “A Thermal-Mechanical Finite Element Workflow for Directed Energy Deposition Additive Manufacturing Process Modeling,” Additive Manufacturing, 2018. https://doi.org/10.1016/j.addma.2018.04.012

Johnson, K.L, Rodgers, T.M., Underwood, O.D., Madison, J.D., Ford, K.R., Whetten, S.R. Dagel, D.J., Bishop, J.E. “Simulation and Experimental Comparison of the Thermo-Mechanical History and 3D Microstructure Evolution of 304L Stainless Steel Tubes Manufactured Using LENS,” Computational Mechanics, 2018.  https://doi.org/10.1007/s00466-017-1516-y

Salloum, M., Johnson, K.L., Bishop, J.E., Aytec, J.M., Dagel, D.J., van Bloemen Waanders, B., “Adaptive Wavelet Compression of Large Additive Manufacturing Experimental and Simulation Datasets,” Computational Mechanics, 2018.  https://doi.org/10.1007/s00466-018-1605-6

Kustas, A.B., Susan, D.F., Johnson, K.L., Whetten, S.R., Rodriquez, M.A., Dagel, D.J., Michael, J.R., Keicher, D.M., Argibay, N. “Characterization of the Fe-Co-1.5V Soft Ferromagnetic Alloy Processed by Laser Engineered Net Shaping (LENS),” Additive Manufacturing (21), 2018.