7. Command References

This section is a comprehensive list of command summaries recognized by the Sierra parser. In general, these summaries include the Syntax of how to specify the command, the Scope where it can be used, and a Summary / Description of what effect it has. User inputs are stylized as follows for convenience:

Sierra Commands

• 7.1. Domain
  • 7.1.1. Sierra
  • 7.1.2. Definition For Function
  • 7.1.3. Values
  • 7.1.4. Finite Element Model
  • 7.1.5. Parameters For Block
  • 7.1.6. Global Constants
  • 7.1.7. Output Scheduler
  • 7.1.8. Property Specification For Fuego Material
  • 7.1.9. Tabular Property Library
• 7.2. Transfer
  • 7.2.1. Transfer
• 7.3. Solvers
  • 7.3.1. Tpetra Solver Block
  • 7.3.2. Tpetra Solvers
  • 7.3.3. Tpetra Preconditioners
• 7.4. Procedure
  • 7.4.1. Fuego Procedure
  • 7.4.2. Apub Transfer
  • 7.4.3. Transfer
• 7.5. Time Control
  • 7.5.1. Time Control
  • 7.5.2. Time Stepping Block
  • 7.5.3. Parameters For Fuego Region
• 7.6. Solution Control
  • 7.6.1. Solution Control Description
  • 7.6.2. Initialize
  • 7.6.3. Parameters For
  • 7.6.4. Parameters For Fuego Region
  • 7.6.5. System
  • 7.6.6. Sequential
  • 7.6.7. Transient
  • 7.6.8. Nonlinear
  • 7.6.9. Subcycle
• 7.7. Fuego Region
  • 7.7.1. Fuego Region
  • 7.7.2. Averaging
  • 7.7.3. Heartbeat
  • 7.7.4. History Output
  • 7.7.5. Restart Data
  • 7.7.6. Results Output
  • 7.7.7. Solid Object
  • 7.7.8. Virtual Thermocouple Model On Block
  • 7.7.9. Solution Options
  • 7.7.10. Buoyancy Model Specification
  • 7.7.11. Edc Model Specification
  • 7.7.12. Multiphase Model Specification
  • 7.7.13. Radiation Transport Equation Model Specification
  • 7.7.14. Time Integration Specification
  • 7.7.15. Turbulence Model Specification
  • 7.7.16. Acoustic Transfer Output
  • 7.7.17. Point Source
  • 7.7.18. Mesh Motion Specification
  • 7.7.19. Rigid Body Motion Model
  • 7.7.20. Vof Model Specification
  • 7.7.21. Postprocess
• 7.8. Particle Region
  • 7.8.1. Particle Region
  • 7.8.2. Create Initial Particle Distribution
  • 7.8.3. Create Particles From File
  • 7.8.4. Fluid Variable Specification
  • 7.8.5. Particle Postprocessing
  • 7.8.6. Particle Postprocess Operation
  • 7.8.7. Heartbeat
  • 7.8.8. History Output
  • 7.8.9. Insert Particle
  • 7.8.10. Particle Average
  • 7.8.11. Particle Breakup Model
  • 7.8.12. Particle Definition
  • 7.8.13. Particle Filled Shape
  • 7.8.14. Particle Filled Tree
  • 7.8.15. Crown Info
  • 7.8.16. Trunk Info
  • 7.8.17. Particle Inflow Boundary Condition On Surface
  • 7.8.18. Particle Interface
  • 7.8.19. Particle Evaporation
  • 7.8.20. Particle Reaction
  • 7.8.21. Particle Material
  • 7.8.22. Particle Open Boundary Condition On Surface
  • 7.8.23. Particle Spray
  • 7.8.24. Particle Tabular Output
  • 7.8.25. Particle Wall Boundary Condition On Surface
  • 7.8.26. Restart Data
  • 7.8.27. Results Output
• 7.9. Average Region
  • 7.9.1. Average Region
  • 7.9.2. History Output
  • 7.9.3. Restart Data
  • 7.9.4. Results Output
  • 7.9.5. Solution Options
• 7.10. Input Output Region
  • 7.10.1. Input_Output Region
  • 7.10.2. Results Output
• 7.11. Initial Conditions
  • 7.11.1. Initial Condition Block
• 7.12. Boundary Conditions
  • 7.12.1. Fixed Boundary Condition On Surface
  • 7.12.2. Heat Flux Boundary Condition On Surface
  • 7.12.3. Inflow Boundary Condition On Surface
  • 7.12.4. Mass Flux Boundary Condition On Surface
  • 7.12.5. Open Boundary Condition On Surface
  • 7.12.6. Symmetry Boundary Condition On Surface
  • 7.12.7. Wall Boundary Condition On Surface
  • 7.12.8. Wall Mass Inject Boundary Condition On Surface
  • 7.12.9. Post Process On Surface
  • 7.12.10. Composite Boundary Condition On Surface
  • 7.12.11. Composite Interface Boundary Condition On Surface
  • 7.12.12. Periodic Boundary Condition On Surface
  • 7.12.13. Nonconformal Boundary Condition On Surface