[About Sandia] [Unique Solutions] [Working With Us] [Contacting Us] [News Center] [Search] [Home] [navigation panel]
News Releases

June 16, 1999

[Z machine news release] [Sandia National Laboratories]

Sandia researchers push Z machine to new limits to test radiation effects

[Z machine & researchers]
ENERGETIC EXPERIMENT -- Sandia National Laboratories researchers Chris Deeney, left, and Christine Coverdale inspect material samples used to test radiation effects produced by Sandia's Z machine, the world's most powerful X-ray source. (Photo by Randy Montoya)
Download 300dpi JPEG image, 'Zwork.jpg', 1.1Mb (Media are welcome to download/publish this image with related news stories.)



ALBUQUERQUE, N.M. -- Researchers at the Department of Energy's (DOE) Sandia National Laboratories have pushed the Z machine, the world's most powerful X-ray source, to new limits using it to test effects of radiation on materials in experiments designed to mimic the response that would occur near a hostile nuclear explosion.

During their experiments, the Z machine generated more than 100 kJ of X-rays (kJ stands for kilojoules, a measure of radiated energy) at 4.8 keV (keV for kilo-electron-volt, a unit used to measure the color spectrum of X-rays). This amount of radiated energy adds significant capability for doing weapons effects experiments; other sources at this X-ray energy have produced only 10 kJ.

"We are excited that we've reached this milestone," says Chris Deeney, one of several scientists involved in the experiment. "The cessation of underground nuclear weapons tests limited testing capabilities, but experimental data are still needed to determine that weapons systems will continue to function in hostile environments. This is the closest to the 'real thing' we've ever achieved with Z-pinches."

Deeney and other Sandia researchers, including Christine Coverdale and Victor Harper-Slaboszewicz, have been using the Z machine and other sources, to determine how materials -- in this case candidate materials for a neutron generator -- respond when exposed to high levels of radiation. When a nuclear weapon detonates, it produces high levels of radiation, which can cause failure in both nearby and distant systems. To prevent failure, weapon components and subsystems designed and built by Sandia must be certified at radiation levels determined by mission need. Testing materials at high radiation doses and dose rates, coupled with advanced computer calculations, are major steps in selecting materials for weapon components.

Information compiled from the Z machine experiments will be used to validate computer modeling. Deeney says computer models are being relied on more and more for certification of components through the Accelerated Strategic Computing Initiative (ASCI) Program since appropriate testing environments are not always available.

"If our findings are close to the computer modeling of the same event, it means the modeling is on track, giving us more confidence in what the model is telling us for regimes that we can't test," Deeney says.

Since 1992, when full-scale underground nuclear testing at the Nevada Test Site was halted, scientists have been developing new ways to verify weapons' reliability without actually detonating them. Working at aboveground simulators like Sandia's Saturn and Z machine, scientists have developed X-ray sources that can be used for testing materials and parts. The powerful Z machine, in particular, has allowed for tests in a more realistic physics regime than was previously possible.

These recent experiments were a collaborative effort, not just within Sandia, but within the nuclear weapons community, Deeney says. The X-ray source development experiments on Z were sponsored by Ralph Schneider at the Defense Threat Reduction Agency (DTRA) in order to enhance unique testing capabilities within the nuclear weapons community, especially for Department of Defense areas of interest.

The Z machine is a pulsed power accelerator consisting of capacitors that, like large batteries, are charged with electricity for more than a minute. The electricity is released in 100 billionths of a second, resulting in a 50 trillion-watt, 18 million-amp pulse. This pulse converges on an array of wires, called the load, creating a plasma. This plasma collapses down onto the axis in what is known as a "Z-pinch" and radiates X-rays.

Coverdale says another milestone reached in this most recent testing with the Z machine is that the researchers used a "nested" wire technique for the wire load. This technique was developed theoretically by Sandia scientists and others at the Naval Research Laboratories and in France.

In previous experiments using titanium wire arrays, the researchers always used a single titanium wire array of up to 160 wires. This time they nestled a second array of 48 to 70 titanium wires within the first array of 96 to 140 wires, providing more stability as the wires imploded onto the axis. This added stability improves the quality of the Z-pinch, increases the X-ray power output and enhances the utility of the emitted radiation by increasing the impulse.

Nested wire arrays have been successfully used before on Z, but only with wires made out of tungsten. Those experiments produced hundreds of terawatts of X-rays to support the Inertial Confinement Fusion program. The researchers used titanium in their radiation testing experiments because they provide a higher power and energy X-ray source.

As part of these tests, candidate materials for neutron generators were placed at various distances from the source, usually one-and-a-half to four feet. Using diagnostics to determine how much stress was produced at each distance, and by examining the materials after the X-ray burst, the researchers can see the effects of the radiation.

"We are specifically looking for damage in the materials, checking to see if the radiation causes damage, and the type of damage. For example, we want to know if the material flakes, cracks, or breaks apart," Coverdale says. "Testing on the Z machine provides us with a valuable tool in figuring out what materials will survive high radiation exposures."

For more information:
Z, which reaches temperatures of the Sun, to help astronomers interpret Chandra data (November 5, 1999)
Concept for rapid-fire thermonuclear explosions proposed by Sandia scientists (September 13, 1999)
Sandia researchers push Z machine to new limits to test radiation effects (June 16, 1999)
Sandia formally proposes to design accelerator expected to produce high-yield fusion (April 8, 1998)
Another dramatic climb toward fusion conditions for Sandia Z accelerator (March 2, 1998)
Output of Sandia Z Accelerator Climbs Closer to Fusion (August 1, 1997)
High-Output Sandia Accelerator Able to Predict Nuclear Blast Physics (December 2, 1996)


Sandia is a multiprogram laboratory operated by Sandia Corporation, a Lockheed Martin Company, for the United States Department of Energy under contract DE-AC04-94AL85000. With main facilities in Albuquerque, N.M., and Livermore, Calif., Sandia has major research and development responsibilities in national security, energy and environmental technologies, and economic competitiveness.

Media contact:
Chris Burroughs, coburro@sandia.gov, (505) 844-094

Technical contact:
Chris Deeney, cdeene@sandia.gov, (505) 845-3657
Christine Coverdale, cacover@sandia.gov, (505) 845-8340




Back to top of page || Questions and Comments || Acknowledgment and Disclaimer