Subject Matter Experts: Shane Page, and David Paoletta
Contributor: Pressure Safety Committee
MN471000, Issue T
Revision Date: November 2, 2009; Replaces Document Dated: March 31, 2008
Administrative Changes: May 26, 2011, and January 19, 2012
Air Force Materials Laboratory, Aerospace Structural Metals Handbook (Traverse City, MI: Mechanical Properties Data Center, 1978).
American National Standards Institute, B31.1. Power Piping (New York: The American Society of Mechanical Engineers, current version).
American Society for Testing and Materials, Annual Book of ASTM Standards (Philadelphia: American Society for Testing and Materials, current version).
ASME Boiler and Pressure Vessel Code (New York: The American Society of Mechanical Engineers, current version).
Baker, W. E.; Kulesz, J. J.; Ricker, R. E.; Bessey, R. L.; Westine, P. S.; Parr, V. B.; and Oldham, G. A.; Workbook for Predicting Pressure Wave and Fragment Effects of Exploding Propellant Tanks and Gas Storage Vessels. NASA Contractor Report 134906 (Springfield, VA: National Technical Information Service, Dept. of Commerce, September 1977).
Barrier Technology Handbook, SAND77-0777 (Sandia Laboratories, 1978).
Bridgman, P. W., The Physics of High Pressure (New York: Dover Publications, 1970).
Bureau of Yards and Docks, Dept. of Navy, Design of Protective Structures, Nav Docks P-51 (Washington, DC: Government Printing Office, nd).
Clark, G. L., Real Gas Equation-of-State Capability at Sandia Livermore, SAND78-8200 (Sandia Laboratories, latest revision).
Department of the Army - Corps of Engineers, General Safety Requirements Manual, Section XXI, "Pressurized Equipment and Systems" (Washington, DC: US Government Printing Office, current version).
Department of Defense, Metallic Materials and Elements for Aerospace Vehicle Structures, MIL-HDBK-5B. 2 vols with amendments (Washington, DC: Government Printing Office, current version).
Department of Transportation, DOT 49 Code of Federal Regulations (CFR) (Washington, DC: US Government Printing Office, current version).
Faupel, J. H., Engineering Design (New York: John Wiley & Sons, 1964).
Handbook of Compressed Gases (New York: The Compressed Gas Association, Inc., current version).
Hickerson, J. P., Elements of Experimental Fracture Mechanics, SLA-73-04-24 (Sandia Laboratories, 1973).
R. M. Graziano's Tariff No. 32 (Hazardous Materials Regulations of the Department of Transportation) (Washington, DC: Association of American Railroads).
Roark, R. J., Formulas for Stress and Strain (New York: McGraw-Hill, current version).
Rolfe, Stanley T. and Barsom, John W., Fracture and Fatigue Control in Structures (Englewood Cliffs, NJ: Prentice-Hall, 1977).
Seely, F. B. and Smith, J. O., Advanced Mechanics of Materials (John Wiley & Sons).
Structures to Resist the Effects of Accidental Explosions. Joint Publication by Departments of the Army, Navy, and Air Force. TMS-13000/NAVFAC P-397/AFM 88-22, Department of Documents, Change #1, March 1971.
Thielsch, H., Defects and Failures in Pressure Vessels and Piping (New York: Reinhold Publishing Corporation, 1976).
Timoshenko, S., Strength of Materials, Part II, Advanced Theory & Problems (New York: Van Nostrand Co., 1956).
Shane Page, srpage@sandia.gov
Al Bendure, aobendu@sandia.gov