9/2010: Sandia, Constructed by Dave Cicone, dcicone@sandia.gov.
10 to 12/2010: CAT, Measurements in the hot spray facility with new cooling/ceramic insulation system, tip temperatures slightly above 100 degrees C.
1 to 2/2011: Sandia, Added thermal paste to injector sac. Measured Spray A cooldown and found about a 30 K heatup.
2 to 4/2011: Eindhoven, Measurements in preburn vessel.
4 to 7/2011: CMT, Measurements in constant flow vessel with study of influence of liquid coolant on tip temperature and spray vaporization and combustion.